PD10-HD Powerbank 10000mAh

PD10-HD Power Pack

Model Number: 00 201662

Battery Capacity: 10000 mAh

Operating Instructions

Thank you for choosing a Hama product. Take your time and read
the following instructions and information completely. Please keep
these instructions in a safe place for future reference. If you
sell the device, please pass these operating instructions on to the
new owner.

1. Explanation of Warning Symbols and Notes

Warning: This symbol is used to indicate safety
instructions or to draw your attention to specific hazards and
risks.

Note: This symbol is used to indicate
additional information or important notes.

2. High-density lithium-polymer cells

This product contains high-density lithium-polymer cells.
High-density cells were developed mainly for smartphone production
in order to meet the high capacity and performance demands using a
minimum amount of space. This new generation of lithium-polymer
cells enables a lightweight and compact design along with a
comparatively high capacity.

4. Operation

4.1 Charging the Power Pack

To charge the power pack, connect it to a power source using the
provided cable. The LED indicator on the power pack will light up
red to indicate that it is charging. Once fully charged, the LED
will turn off.

Note: It is recommended to fully charge the
power pack before first use and after long periods of storage (i.e.
over three months).

4.2 Charging terminal devices

To charge a device using the power pack, connect the device to
the power pack using a compatible cable. The LED indicator on the
power pack will light up blue to indicate that it is charging the
device. Make sure to use a cable that is compatible with your
device to avoid damage.

Warning: Do not connect devices that require a
higher voltage than the power pack can provide. This can overload
the power pack and cause damage.

Note: Using a cable that is too long or of poor
quality can reduce the charging current and increase the charging
time.

“PD10-HD” Power Pack

00 201662
10000 mAh
Operating Instructions GB Bedienungsanleitung D
Mode demploi F Instrucciones de uso E Gebruiksaanwijzing NL Istruzioni per luso I Instrukcja obslugi PL Használati útmutató H Manual de utilizare RO
Návod k pouzití CZ Návod na pouzitie SK Manual de instruções P
Bruksanvisning S RUS
BG GR
Kullanma kilavuzu TR Käyttöohje FIN

G Operating instruction
Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note This symbol is used to indicate additional information or important notes.
High-density lithium-polymer cells This product contains high-density lithium- polymer cells. High-density cells were developed mainly for smartphone production in order to meet the high capacity and performance demands using a minimum amount of space. This new generation of lithium-polymer cells enables a lightweight and compact design along with a comparatively high capacity.
2. Package Contents · Power Pack “PD10-HD”, 10000 mAh · USB-C to USB-C cable · These operating instructions
3. Safety Notes · Use the product for its intended purpose only. · Protect the product from dirt, moisture and overheating, and only use it in a dry environment. · Do not use the product in the immediate vicinity of heaters or other heat sources or in direct
sunlight. · Keep this product, as all electrical products, out of the reach of children! · Do not drop the product and do not expose it to any major shocks. · Do not operate the product outside the power limits given in the specifications. · Do not open the device or continue to operate it if it becomes damaged. · Dispose of packaging material immediately according to locally applicable regulations. · Since the battery is integrated and cannot be removed, you will need to dispose of the product as
a whole. Do this in compliance with the legal requirements. · Do not modify the product in any way. Doing so voids the warranty. · Do not use the product in areas where the use of electronic devices is not permitted. · Do not attempt to service or repair the product yourself. Leave any and all service work to qualified
experts. · Do not throw the battery or the product into fire. · Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.
2

4. Operation
4.1 Charging the Power Pack
Warning ­ Battery · Do not charge the power pack using your PC or the notebook. The charging currents can
damage the USB port of the PC/notebook. · Only use suitable charging devices or USB connections for charging. · As a rule, do not charge devices or USB connections that are defective and do not try to repair
them yourself. · Do not overcharge the product or allow the battery to completely discharge. · Avoid storing, charging or using the device in extreme temperatures and extremely low
atmospheric pressure (for example, at high altitudes). · When stored over a long period of time, batteries should be charged regularly (at least every
three months).
· Begin charging the power pack by connecting the included USB-C to USB-C cable to the power pack’s USB-C (IN 5V/3A; 9V/2A) port and to a suitable USB-C charger. Alternatively, the power pack can also be charged via the Micro-USB port. For this purpose, connect a Micro-USB cable to the Micro-USB input (IN 5V/2A; 9V/2A) on the power pack and to a suitable USB charger. Please refer to the operating instructions for the USB charger used.
· Charging begins and ends automatically. · Charge the Power Pack fully before using it for the first time.
Note ­ Capacity · The capacity is always shown when the Power Pack is charging. · Each status LED corresponds to 25% of the capacity. When an LED is permanently illuminated,
this indicates that this capacity level has already been reached. The Power Pack is charged to at least 75% if three LEDs are illuminated, and the fourth is flashing. · If all four status LEDs light up, the full capacity is available. · Press the button of the Power Pack to switch it on and to check its current capacity. · To switch the power pack off, press the button twice until the status LEDs go out.
4.2 Charging terminal devices
Warning ­ Connecting terminal devices · Before connecting a terminal device, check whether the power output of the charger can supply
sufficient power for the device. · Ensure that the total power consumption of the connected terminal device does not exceed
3000 mA. · Please refer to the instructions in the operating manual of your terminal device. · It is essential that you observe these specifications and the safety instructions regarding the
power supply of your devices. · The power pack must not be charged and discharged at the same time! · Please do not use the USB and USB-C outputs simultaneously for charging, as this reduces the
charging current considerably. As a result, the charging time is greatly increased and the power pack may be overloaded.
3

Obsah je uzamcen
Dokoncete, prosím, proces objednávky. Následn budete mít pístup k celému dokumentu.
Proc je dokument uzamcen? Nahnvat Vás rozhodn nechceme. Jsou k tomu dva hlavní dvody: 1) Vytvoit a udrzovat obsáhlou databázi návod stojí nejen spoustu úsilí a casu, ale i financní prostedky.
Dlali byste to Vy zadarmo? Ne. Zakoupením této sluzby obdrzíte úplný návod a podpoíte provoz a rozvoj nasich stránek. Teba se Vám to bude jest nkdy hodit. ) Mozná zpocátku ano. Ale vzte, ze dotovat to dlouhodob nelze. A rozhodn na tom nezbohatneme. 2) Pak jsou tady ,,roboti”, kteí se pizivují na nasí práci a ,,vysávají” výsledky naseho úsilí pro svj prospch. Tímto krokem se jim to snazíme pekazit. A pokud nemáte zájem, respektujeme to. Urgujte svého prodejce. A kdyz neuspjete, rádi Vás uvidíme!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>