GloryFit LC601 Smart Watch User Manual
- June 13, 2024
- GloryFit
Table of Contents
LC601 Smart Watch
User Manual
LC601 Smart Watch
Warning
Please consult your doctor before starting a new exercise program. Although
the smart watch can monitor your heart rate, it can’t be used for any medical
purpose. It is designed to help people live healthier lives. Please remember
to consult your doctor before starting any exercise and diet plan.
Device requirements
This product supports devices with iOS 9.0, Android 5.0 and above, and
Bluetooth 4.0. Android 6.0 and above devices need to open the GPS permission
to use.
Charging
If the device is idle for a long time, please remember to recharge at least
once a month. Schematic diagram of the magnetic charger:
a. please align the magnetic
charging cable with the metal sheet of the bottom shell, the magnet will
automatically adsorb the positive and negative poles for charging.
b. Please ensure that the charging contacts are free of dirt and impurities,
if any, please wipe them clean, otherwise it will not charge. c. Plug the USB
into a 5V500MA adapter and it will be fully charged in 2-3 hours.
Schematic diagram of wireless charger:
a.
Please align the charging base with the bottom shell, and the concave
e surface of the base will automatically align with adsorption charging.
b. Ensure that there is no foreign matter adsorbed on the wireless charging
position and the bottom of the watch, otherwise it will lead to poor charging.
c. Plug the USB into the 5V500MA adapter, and it will be fully charged in 3-4
hours.
How to connect smart watch with mobile phone
4.1 Power on: charge or press the smart watch side button for 3 seconds.
4.2Install APP: Scan QR code through mobile phone, or search “Glory Fit” APP
in Apple APP store, Google Play Store to download and install.
https://app.help-document.com/gloryfit/download/index.html
4.3 How to connect smart watch through mobile APP:
First, put the smart watch close to the mobile phone, and then turn on the
Bluetooth and GPS of the mobile phone according to the APP connection guide.
Then search the APP for the Bluetooth name is “Smart Watch”. Click the smart
watch to connect. Set personal information according to APP prompts, and allow
APP to obtain mobile authority to complete the connection. 4.3.1 Apple
device connection:
After the smart watch and Apple App are connected for the first time, the
“Bluetooth pairing request” will be prompted. Please click “Pair” to complete
the connection. After pairing, it is allowed to display a notice to check
whether the Bluetooth settings are connected. Then enter the system to check
whether the sharing notice is turned on, and then the smart watch can receive
from iOS system push Calls, SMS, QQ, WeChat and other notification reminders,
otherwise can not receive the reminders.
4.3.2 Android device connection:
When connecting with Android system, you need to open the APP background
operation permission in the mobile phone manager or system settings (please
open the options such as self-start, high power consumption, white list, etc.,
otherwise the APP will be cleared by the system, and the connection with the
smart watch will be disconnected. )
4.3.3 Connection call Bluetooth
Android devices connect to Bluetooth for calling: After the APP is
connected, the watch turns on the Bluetooth call, and the phone will pop up
the call pairing prompt. Click on the pairing to complete the Bluetooth call
connection with “Smart Watch”. Some phones require manual access to settings,
Bluetooth, search for “Smart Watch (xxxx)” and click connect.
Apple devices connect to Bluetooth for calling: (iOS13 and above systems will
automatically connect to Bluetooth for calling after connecting to the APP,
and iOS13 and below systems need to manually connect to Bluetooth for calling.
)
After connecting the APP watch, turn on the call Bluetooth switch
of the watch, then turn on the phone settings, Bluetooth, search for Smart
Watch (xxxx), and click Connect.
4.4 Unbind:
Unbind Android device: Click unbind on the app device to unbind the smart
watch and the APP.
Unbind Apple device: Click on the device in the app to unbind the smart
watch and the app; Enter the phone settings-Bluetooth, click the exclamation
mark behind the name Smart Watch, and click Ignore this device in the pop-up
dialog box. The phone will be completely disconnected from the watch.
Note: After unbinding the watch from the Apple APP, you will also need to
unbind and unpair of phone’s Bluetooth.
Precautions
5.1. In theory, the smart watch supports operating system iOS9.0, Android5.0or
above and Bluetooth 4.0 devices, but not all mobile device models. Please
refer to the actual conditions for details.
5.2. The product is charged with 5V500MA. It is strictly forbidden to use the
over-voltage load power supply to avoid hardware damage.
5.3. The smart watch battery is built-in and cannot be removed. Please do not
try to replace the battery.
5.4. The operating environment of the wristband is 0℃ to 45℃ ;Charging
temperature: 0℃ to 45℃ .
5.5. Please note when wearing: if you are sensitive skin or wearing the
wristband too tightly, you may feel uncomfortable.
5.6. Please wipe the smart watch dry before charging. Otherwise, it will lead
to failure or corrosion of charging contact point.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
▶ -Reorient or relocate the receiving antenna.
▶ -Increase the separation between the equipment and receiver.
▶ -Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
▶ -Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>