FALCON V2 23 WiFi Reversing Camera User Guide
- June 13, 2024
- Falcon
Table of Contents
WiFi Reversing Camera
User Guide
V2 23 WiFi Reversing Camera
Thank you for
purchasing the Falcon WiFi Reversing Camera.
This user guide will tell you how to correctly use the WiFi Camera and and
install the necessary app on your phone / tablet / Falcon Satellite navigation
system
Please read the manual carefully before using. We hope you enjoy this system.
Compatible with:
Attaching the Camera to your Motorhome or Caravan
The base of the camera is magnetic, if you have a suitable steel surface you
can attach the camera directly to that.
If you don’t have a suitable steel surface you can attach the included white
steel plate to your vehicle using the included adhesive and then attach the
camera to that.
Be sure to apply a thick layer of adhesive and allow at least 24 hours for it
to dry before attaching the camera.
Charging the Camera
To charge your camera pull the orange cover on the rear of the camera to
reveal the charging socket and plug the charging lead in.
Connect the other end of the charge lead to the included cigarette lighter
adapter or a USB mobile phone adapter.
The camera should reach a full charge from flat in approximately 4.5 hours.
The LED on the camera is red when the camera is charging and switches off when
the camera is fully charged.
After charging be sure to refit the orange rubber cover to the charge socket
to prevent water ingress.
Using the Camera with an Apple device
Step 1:
Search the App Store for “SafetyEye” and install the app
Step 2:
Open the app and allow the app permission to access and mange your phone
Step 3:
Turn your camera on using the button on the front, the LED will light up blue
when turned on. Select Your Camera on the app. Step 4:
Give your device a moment to connect to the camera
Step
5:
Travel with piece of mind you know what is behind you.
Using the Camera with an Android device
Step 1:
Search the Play Store for “SafetyEye” and install the app
Step 2:
Open the app and allow the app permission to access and mange your phone
Step 3:
Turn your camera on using the button on the front, the LED will light up blue
when turned on. Select Your Camera on the app.
Step 4:
Give your device a moment to connect to the camera
Step 5:
Travel with piece of mind you know what is behind you.
Using the Camera with the Falcon Navi Explorer Sat Nav
- Press the “Home” button (shown on the right) at the bottom of the screen to return to the main menu if you are not already there.
- Press the button on the camera briefly to turn it on. The LED will light up blue.
- Press the WiFi camera icon (shown on the right).
Press WiFi Setup and the camera will connect and you will see the picture from the camera as shown below.
Press the camera icon to take a snapshot and the folder icon to view saved snapshots.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>