Motorola H375 Bluetooth Headset User Manual

Motorola H375 Bluetooth Headset

Universal Bluetooth® Headset H375

• H375
• MOTOMANUAL

European Union Directives Conformance Statement

Hereby, Motorola Inc., declares that this H375 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte.

Caring for the Environment by Recycling

When you see this symbol on a Motorola product, do not dispose the product with household waste.

Recycling Mobile Phones and Accessories

Do not dispose of mobile phones or electrical accessories, such as chargers or headsets, with your household waste. In some countries or regions, collection systems are set up to handle electrical and electronic waste items. Contact your regional authorities for more details. If collection systems aren’t available, return unwanted mobile phones or electrical accessories to any Motorola Approved Service Centre in your region.

FCC Notice to Users

Users are not permitted to make changes or modify the device in any way. Changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. See-47 -CFR-Sec.-15.21.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See-47-CFR- Sec.-15.19(3).

Before you begin

See fi gure 1 on page 1.

Take a moment before you get started to familiarize yourself with your new H375 Bluetooth Hands-free Headset.

• 1. Power button
• 2. Microphone
• 3. Call button
• 4. Indicator light
• 5. Volume buttons
• 6. Speaker

Charging your headset

See fi gure 2 on page 1.

The indicator light turns on when the battery is charging. It may take up to 30 seconds for the indicator light to turn on. When the headset’s battery is fully charged (about 3 hours), the indicator light is steadily lit in blue

Note: Headset is NOT functional while charging.

Wearing your headset

See fi gure 3 on page 2.

• Your H375 headset is supplied with both round-and-oval shaped earbuds to provide personal choice for maximum comfort. The ear bud is fi tted onto the end of your headset’s earpiece speaker, and placed onto your ear when using your headset.
• Your headset’s performance is greatly dependent upon achieving a good fi t on your ear. Therefore, we recommend trying all the supplied ear buds with your headset.

You can wear your H375 headset on your left of right ear. The headset comes ready for the right ear.

• Placing the headset on your ear: see fi gure 4 on page 2.
• Placing the headset on the left ear: see fi gure 5 on page 2.

Changing volume orientation button

• You can change the orientation of the volume buttons on your headset.
• Turn the headset power off
• Press and hold the Volume button you want to assign as the “Volume up” button and the Power button to power on the headset. The indicator light fl ashes 3 times in blue.

Turning headset on and off

• To turn your headset on, press and hold the Power button until the indicator light fl ashes.
• To turn your headset off, press and hold the Power button until the indicator light fl ashes rapidly and then turns off.

Pairing your headset

• Your phone’s Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone. Please check your phone’s user’s guide.

Note: The Bluetooth feature remains on until you turn the feature off.

Before you can use your headset, you must pair it with your phone.

• Ensure headset is in pairing mode
  • Power the headset on.
  • After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode.
  • If the headset does not enter into pairing mode, see “Troubleshooting” section.
• Set your phone to look for your headset
  • Perform a device discovery from the phone. For details about device discovery, consult your phone’s user’s guide. The phone lists Bluetooth devices it fi nds.
  • Select Motorola H375 in the list of discovered devices and confi rm by following the on-screen prompts.
  • When prompted by the phone, enter the passkey 0000 and confi rm. Pairing is successful when the headset indicator fl ashes purple and blue.

Test and use

• Your phone and headset are now paired and ready to make and receive calls. To confi rm they are successfully paired and operating properly, place the headset over your ear and make a call from your phone. You will hear ringing from the headset.
• After you have successfully paired your phone and headset, you do not need to repeat these steps each time you use the headset.

Using your headset

Making & receiving calls

• Your headset supports both hands-free and headset profi les.
• Accessing call functions depend upon which profi le your phone supports. See your phone’s user’s guide for more information.

Note: Some features are phone/network dependent.

ringing
Redial last call| Press and hold the Call button for at least 2 seconds until you hear a beep
Make a voice dial call| Tap the Call button and speak the name after the tone
Mute or un-mute a call| Tap both Volume buttons

Audio tones

Indicator lights

Checking battery level

To check battery level while headset is powered on, press and hold both Volume buttons for 5 seconds until you hear a beep. The indicator light displays the following charge status for a few seconds.

Charging status

With charger plugged in

Operating status

With no charger plugged in

Note: After 30 minutes on a call or of inactivity, the light stops fl ashing to conserve battery power, but the headset remains in standby mode.

Troubleshooting

My headset will not enter pairing mode

• Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue,
• indicating the headset is now in pairing mode.

My phone doesn’t fi nd my headset

• Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices.

My headset worked before but now it’s not working

• Make sure your phone is on and the Bluetooth feature is turned on in your phone. If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature and pair your phone and headset again.
• If you have any additional questions, please call your hotline number (0870-9010-555) or visit us at www.hellomoto.com.

Frequently Asked Questions

How do I ignore an incoming call with the Motorola H375 Bluetooth Headset (with model number)?

To ignore an incoming call, press and hold either Volume button until the incoming call stops ringing.

How do I redial the last call with the Motorola H375 Bluetooth Headset?

To redial the last call, press and hold the Call button for at least 2 seconds until you hear a beep.

How do I mute or unmute a call using the Motorola H375 Bluetooth Headset?

To mute or unmute a call, tap both Volume buttons simultaneously.

How do I check the battery level on the Motorola H375 Bluetooth Headset?

While the headset is powered on, press and hold both volume buttons for 5 seconds until you hear a beep. The indicator light will display the charge status.

What do the different audio tones mean on the Motorola H375 Bluetooth Headset?

Refer to the guide for explanations of various audio tones and their corresponding headset status.

How do I charge my Motorola H375 Bluetooth Headset?

To charge the Model H375 headset, plug the Motorola charger into the end of the headset. The indicator light turns on when charging. When fully charged (about 3 hours), the indicator light stays lit in blue. Unplug the charger from the headset.

How do I make a call with my paired Motorola H375 Bluetooth Headset and phone?

To make a call with the Model H375 headset, place the ear bud on your ear with the earhook securely fitted. Dial the number on your phone and press SEND. If successfully paired, you will hear ringing on the headset.

How do I turn off the Motorola H375 Bluetooth Headset to save battery power?

To turn off the Model H375 headset, press and hold the Power button when not in use for an extended time.

How do I change the ear side of the Motorola H375 Bluetooth Headset (Model H375) from right to left?

To change the H375 headset for use on the left ear, follow the provided instructions in the guide.

How can I change the orientation of the volume buttons on the Motorola H375 Bluetooth Headset?

To change the orientation of the volume buttons on the Model H375 headset, follow the guide's instructions.

How do I check the battery level on my Motorola H375 Bluetooth Headset?

To check the battery level while the Model H375 headset is powered on, press and hold both volume buttons for 5 seconds until you hear a beep.

Reference:Motorola H375 Bluetooth Headset User Manual- device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>