Mills E00-4857 Guide Beads for 24 Fibre Pk50 User Guide
- June 16, 2024
- Mills
Table of Contents
Mills E00-4857 Guide Beads for 24 Fibre Pk50
Product Information
Specifications:
- Product Code : E00-4857
- Short Description: Fibre Blowing Beads for 24 Fibre Pk50
Product Usage Instructions
Preparing the Fibre Bundle:
Before applying the blowing beads, make sure to prepare the fibre bundle by
stripping off any excess coating or protective layers. Ensure that the fibre
bundle is clean and free from any debris.
Applying the Blowing Beads:
Follow these steps to apply the blowing beads:
- Take one blowing bead from the pack.
- Position the bead at the leading edge of the fibre bundle.
- Using the E72-6782 Blown Fibre Bead Crimper, crimp the bead securely onto the fibre bundle.
- Repeat this process for each fibre in the bundle until all beads are applied.
Product Images
Product Code : E00-4857
Short Description
Fibre Blowing Beads, which can be quickly and easily crimped to the leading edge ballistic fibre bundle fibre to provide smooth running of the blown fibre unit through the blown fibre microduct and minimise the risk of snagging at connector locations and joints. Beads can be applied using E72-6782 Blown Fibre Bead Crimper.
Supplied in a pack of 50.
Blowing the Fibre
Once all the blowing beads are securely crimped onto the fibre bundle, you can proceed with the fibre blowing process. Connect the blown fibre unit to the blown fibre microduct and ensure a secure connection. Apply appropriate air pressure to blow the fibre through the microduct, ensuring smooth running without any snagging or obstruction caused by connectors or joints.
Contact us on:
Address : kills Limited Unit 2, Zodiac Business Park, High Road, Cowley
Uxbridge UB8 2GU
Tel : 020 8833 2626
Fax : 020 8833 2600
Email : sales@millsltd.com
Company No. 00282704
VAT No. 227082574
https://www.millsltd.com/default/guide-beads-for-24-fibre-pk50.html
21/11/2022
FAQ’s
What is the purpose of the blowing beads?
The blowing beads are used to provide smooth running of the blown fibre unit through the microduct and minimize the risk of snagging at connector locations and joints.
Can I apply the blowing beads without using the E72-6782 Blown Fibre Bead Crimper?
It is recommended to use the E72-6782 Blown Fibre Bead Crimper for secure application of the blowing beads. Using other methods may not provide the same level of reliability.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>