GTL G806 5 In 1 Magnetic Charging Station Instruction Manual
- June 16, 2024
- GTL
Table of Contents
GTL G806 5 In 1 Magnetic Charging Station Instruction Manual
Wireless Charging Guide
Please use the DC Power port Adapter.
Charging with Cases
Introduction
- Magnetic Wireless charging area for Mobile phone.
- Wireless charging area for Bluetooth headset.
- Wireless charging area of iWatch.
- USB-A output port.
- USB-C output port.
- DC power input port.
- Operating indicator
Operation Instruction
Charging the mobile phone: Put the mobile phone upright in the magnetic
wireless charging area of mobile phone, and you can see the“ Charging
indicator” on the display of the mobile phone, showing that it is being
charged properly.
Charging the iWatch: Put the iWatch on the wireless charging area of iWatch,
and align the magnets; the“ Charging indicator” on the iWatch will light up,
indicating that it is being charged properly.
Charging for Arpad: Put the headset flat on the other side of the wireless
charger area to charge, and see that the charging indicator of the Bluetooth
headset lights up, indicating normal charging.
USB A port charging area.
USB C port charging area.
This product needs to use 12V-3A DC interface adapter for power supply, and needs to be connected to the DC head interface ；The indicator on the product bottom flashes three times and standby and flashes off, indicating that the power has been turned on.
Wireless charging indicator: The blue indicator is always on during the mobile
phone on charging; The blue indicator is off when the mobile phone not be
charged; When charging fails, the working indicator will flash.
Specifications
| Name | 5 in 1 Magnetic Charging Station | Model | G806 |
|---|---|---|---|
| Product size | 146.6 75.9 130 (mm) | Power Supply Port | DC socket |
| Input | 12V JA | Output Power | 36W(Max) |
Matters needing attention
When charging the device, do not use a protective cover with a thickness of more than 5mm, and do not use a protective cover with a metal sheet.
Do not put metal foreign objects in the charging area.
When charging, please aim the device at the center of the charging area.
FCC Warming:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body.