Frienhund B0CFS55QDK Smart Pet Feeder With Camera User Manual
- June 16, 2024
- Frienhund
Table of Contents
- Safety Instructions & Precautions
- Warranty
- Product Specifications
- Packing List
- Component Breakdown
- Assembly and Prepare For Setting
- Button and Display Description
- LED Light State Description
- Install the APP and Log In
- Connecting
- About the Camera
- Cleaning & Care
- FAQ
- Reference for Meal & Portion Settings
- 100% After Sales Service
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Frienhund B0CFS55QDK Smart Pet Feeder With Camera User Manual
Safety Instructions & Precautions
-
Please do not use wet, canned or moist food
-
Please do not attempt to repair or modify the pet feeder yourself
-
Please do not use the data cable for any other purpose.
-
Children must be used under the guidance of an adult.
-
If you need to use an extension cord, please use the same grade one.
-
To prevent food clogging, the kibble size should not be more than 10mm.
-
Please be sure to unplug the power supply before installing andremoving the accessories.
-
Please do not store this product in humid place and do not use it for any other purpose.
-
Please do not immerse the body and power supply in the water or the electronic components will be damaged.
-
Using product accessories not provided or recommended by the original manufacturer may cause unsafe conditions.
-
Please do not put any items except dry food into the food storage bucket because it may cause abnormal conditions even pet safety problems.
-
Please place the feeder horizontally, It is recommended to place it against the wall to prevent tripping over the wire or being torn by pets.
-
If you do not use the product for a long time, please remember to remove the battery and unplug the power supply.
-
Please read the cautions on the manual and package carefully.
-
This product uses 4 AA batteries as a backup power supply, please use double power supply to ensure the normal use of the product (batteries not included).
Warranty
1-Year Warranty
Lifetime Support
For guidance on product use and warranty extension, please contact our brand
after-sales staff via email: [support@frienhund.com)
If any questions related to orders, please contact the seller through the
shopping platform.
For Further Assistant:
Tel : 1-877-631-3655, (PST8:00
am-5:00 pm, Mon-Fri)
Product Specifications
Product Name | Smart Pet Feeder with Camera(2.4G/5G WiFi) |
---|---|
Suit For | Cat, Dog, Rabbit, Squirrel, Small Pets |
Rated Voltage | 5V 1A |
Product Power | 5W |
Power Supply | Power Adapter and 4 AA Batteries |
Material | EC0-Friendly ABS |
Product Size | 192.5178.5322mm |
Product Weight | 1.6Kg |
Product Capacity | 25Cup/6L |
Pet Food | Dry Food |
Portion Size | 10~20g/Portion (Varies due to density of pet food) |
Camera | 1080P HD Night Vision Camera |
Packing List
-
Safety Lock’1
-
Lid*1
-
Food Tank’1
-
Feeder Base 1
-
Stainless Steel Feeding Bowl*1
-
Bowl Tray 1
-
Power Adapter*1
-
USB Cable’1
-
Desiccant*1
-
Desiccant Compartment*1
-
User Manual*1
Component Breakdown
- Safety Lock
- Lid
- Desiccant
- Desiccant Compartment
- Food Tank
- Camera
- Controlling Panel
- Dispensing Outlet
- Stainless Steel Feeding Bowl
- Bowl Tray
Assembly and Prepare For Setting
Step 1 Connecting Power
-
Insert the 5V power adapter into the socket, plug in power cable of the feeder
-
Open the battery compartment at the bottom of the unit. Install 4 AA batteries (Not Included) in case of home outage (can not be used as the main power).
-
The indicator under the camera will flash rapidly automatically means the feeder is on.
-
When installing the food tank, please assemble and follow the instruction as shown in.
-
Food inlet should be the same direction as the dispensing outlet.
-
Please pay attention to the impeller direction.
Step 2 Filling Food Tank
- Fill food tank with dry pet food.
Note:
- Please fill food tank with dry pet food, and do not use canned, wet or moist pet food.
- Recommend kibble size ranging from 5-10mm/0.12-0.4in in diameter.
Step 3 Assembling the Food Tray
-
Align the bulging of the food tray and holes n the base, and push upward to connect the two.
-
Put-on the stainless steel feeding bowl.
-
Close the lid and lock the safety lock.
Button and Display Description
Recording
Delete the recording
**Check the recordings
**
LED Light State Description
Product Status | Light Color |
---|---|
Low Battery (Battery Powered Only) | Red |
WiFi Connection in Progress | Blue Light Flashes Quickly |
WiFi Connected Status | Solid Blue Light |
Note:
After the blue light starts flashing, please finish connecting your phone to
the device within five minutes, other wise the blue light will go out. If the
time is exceeded, please reset it by pressing and hold the WiFI Reset Button
for 15 s seconds.
Install the APP and Log In
App Installation
Download and install the “Smart Life” App by scanning the QR code, or
searchingit on Google Play (Android); App Store (ios).
Smart Life
Sign up and login
After opening the app, if you don’t have an account, please register one. If
you have already, please log in directly.
Connecting
Note:
- Make sure you have already turned the Bluetooth and WiFi on before you try to connect the device.
- One device can be attached to only one account at a time, but when you share your controlling the app, the device can be controlled by multiple phones.
Add and Connect the Feeder
- Connect and turn the power on.
when the blue light is rapidly flashing and hear the – prom tone means the devices ready to connect. and turn the t)) power on.
(If the light is not flashing, please long press for 15 seconds to reset the device).
-
please open the Smart Life AP – Tap the [ +] in the upper right comer to add the device.
-
please follow the app prompts to operate.
Note: The mobile phone QR code needs to be aligned with the camera and kept ate distance of 15-20 cm, moving back and forth from far to near to scan the QR code.
About the Camera
SD/HD:
Standard Definition/High Definition, the default video quality is HD(high
definition), tap SD or HD to select your preferred video quality
Video:
Tap to start recording a video clip, tap again to end. Video clips are
automatically saved in the Album section of the APP
Screenshots:
Tap to take a screenshot of on thermal-time screen. Screenshots are
automatically saved in the Album section of the APP.
Gallery:
Tap to check the screenshots and video clips.
**Switch the Mode
**
- To enable the Two-Way Talk function, tap l+++] on the up prefight
- Basic Function Settings
- Talk Mode
- One-Way Communication
One-Way Communication (Default Mode)
Hold the talk button to speak, release the button to end the talk. You can’t
hear the other side when you are talking.
Two-Way Talk:
Tap the button to speak, the pet or people on the other side can hear you
and talk with you. Tap again to end the talk. It ensures seamless
communication between the two sides.
Cleaning & Care
We recommend to clean the feeder regularly for the health of your pet. The
washable parts of the feeder are as follows: safety lock, lid, desiccant
compartment, food tank, stainless steel feeding bowl, bowl tray.
FAQ
Problem Solution Live video not showing.1) Switch to stronger WiFi signal. Where 6re the photos 6nd videos stored?1) The screenshots and video clips are stored in the Album section of the APP.
Problem | Solution |
---|---|
C6n’t connect the feeder to WiFi | 1) Keep the feeder and your phone |
close to your router, make sure the network signal is good.
2) Restart the feeder.
3) Follow the APP’s instructions or our operation videos to add the feeder.
There are more than 1 adding methods to choose from.
4) Contact our after-sales team via email for help.
The WiFi connection goes off line frequently| 1) Keep the feeder close
to your router, make sure the network signal is good, it is ideal to make it
within 3 meters without obstacles and walls.
2) Make sure the power cord is connected firmly.
3) Restart the feeder.
The indic6tors 6re off| 1) Check whether the electricity is cut off.
2) Check whether the indicator function is off on the App.
The feeder’s c6mer6 c6n’t re6d the QR code on your phone| 1) Make sure
the feeder is ready for network connection, that is, the WiFi indicator on the
feeder is flashing.
2) Hold your phone about 6-8 inches a way from the feeder’s camera. Remove the
food bowl and tilt the feeder as needed.
2) lf the network is poor, change the video quality from HD (high definition)
to SD (standard definition).
2) The video playbacks are stored in the Replay section of the APP.
Reference for Meal & Portion Settings
Note:
- Below is the recommended amount of food your pet needs by each meal.
- One portion of this feeder is 10-20g.
CAT
Age (Months) | 1-2 | 2-4 | 4-6 | 6-8 | 8-12 |
---|---|---|---|---|---|
Suggested Feed | 20-30g | 30-50g | 50-70g | 70-80g | 80-90g |
Weight (Months | 2-3kg | 3-5kg | 5-7kg | Pregnancy | Lactation Period |
Suggested Feed | 25-35g | 35-55g | 55-35g | 70-110g | 120-190g |
If the pet fail to eat up the previous programmed meal, please reduce the next meal portion.
– DOG-
Dog Weight | Normal Activity | Increased Activity |
---|---|---|
2kg | 39g | 45g |
4kg | 669 | 76g |
6kg | 89g | 104g |
8kg | 111g | 128g |
10kg | 131g | 152g |
12kg | 150g | 174g |
14kg | 178g | 206g |
16kg | 1979 | 2289 |
18kg | 197g | 228g |
20kg | 233g | 270g |
Dog weight | Normal Activity | Increased Activity |
Activity**
22kg| 250g| 290g| 329g
24kg| 267g| 309g| 351g
26kg| 274g| 318g| 361g
28kg| 290g| 336g| 381g
30kg| 305g| 353g| 402g
32kg| 320g| 371g| 422g
34kg| 335g| 388g| 441g
36kg| 350g| 405g| 461g
38kg| 364g| 422g| 480g
40kg| 379g| 439g| 496g
100% After Sales Service
‘We provide 1-year warranty and life time support for this appliance.
Please email our support team at
[support@frienhund.com] if you have any
questions, attach your order number and describe your problem in your email.
We will get back to you within 24 hours.
For Instant Service Support Please Contact:
Freehand”
1-877-631-3655 (PST 8:00 am-5:00
pm, Mon-Fri )
www.frienhund.com
support@frienhund.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>