CISCO 5-CBW140AC-B Business 140AC Wi-Fi Access Point User Guide
- June 13, 2024
- Cisco
Table of Contents
Cisco Business 140AC Access Point
QUICK START GUIDE
5-CBW140AC-B Business 140AC Wi-Fi Access Point
Thank you for choosing the Cisco Business 140AC Access Point. This access
point can be used to create a new wireless network or added to an existing
network to expand coverage.
This Quick Start Guide will get you up and running in no time.
What’s in the Box
- Cisco Business 140AC Access Point
- Mounting Kit
- Ethernet Cable
- Quick Start Guide
- Technical Support Contact List
- Pointer Card China RoHS
- Compliance Information (for EU SKU only)
Product Features
- Status LED
- RJ-45 Console Port (For tech support only)
- PoE (Power over Ethernet)-In Port (Ethernet Uplink Port)
- Mode Button
- Security Screw Hole
- Mounting Bracket
First, You’ll Need…
- An active Internet connection
- A phone or tablet with Wi-Fi capability (not connected to an active wireless network)
- A PoE (Power over Ethernet) switch, router or PoE injector (802.3af) to supply power to the access point.
- A router (to act as your DHCP Server).
Get Connected
-
Connect your access point via ethernet cable (provided) to a PoE LAN port on your switch or router. If you do not have a PoE switch or router you will need to use a PoE injector (not included).
Setting up a new network or adding to an existing network?
Set up a new network
If setting up a new nework the device will begin initial boot up. The LED will cycle through green, amber, and red. This is normal and can take up to 6 minutes. The device is not ready until the LED is consistently blinking green or solid green. Once this occurs you can proceed to “Get Configured”. -
Add to an existing wireless network
Allow the access point to boot up and automatically update its firmware and configuration to match the existing network. This can take ten minutes or more and the LED will cycle through green, amber and red. This is normal. Once the LED is blinking green or solid green the setup is complete and the AP has joined the network.
Get Configured
Download the Cisco Business Mobile app
No computer is needed for setup, just use the app on your mobile phone or
tablet.
Scan the QR code here to download the app or go to
cisco.com/go/app and follow the installation
instructions.
Alternative: Web UI (Internet Browser) Setup
If you do not wish to use the Cisco Business Mobile app you can use the Web UI
for setup.
These instructions can be found online in the Web UI Setup Document.
To download the instructions see the “Get Support” section below.
Mounting and Grounding
Cisco Business Wireless access points can be mounted in several
configurations—on a suspended ceiling, on a hard ceiling or wall, or in the
plenum air space above a suspended ceiling.
Mounting instructions are located in the Administration Guide, see the “Get
Support” section below.
Get Support
For Cisco support and additional product documentation, including the Web UI Setup Document and Administration Guide, visit: https://cisco.com/go/cbw140ac
©2021 Cisco and/or its affiliates. All rights reserved. Cisco and the Cisco
logo are trademarks or registered trademarks of Cisco and/or its affiliates in
the U.S. and other countries.
To view a list of Cisco trademarks, go to this URL:
https://www.cisco.com/go/trademarks.
Third-party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between
Cisco and any other company. (1110R)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>