K-SPEAKER K2 Audio System User Manual

K-SPEAKER K2 Audio System User Manual

Features

Package content

Please check whether the accessories are complete after receiving the goods.

• Host
  

• Power cord

• User’s manual

• M6 M4 M3

• 7/8in

• 1in

• 1-1/4in

• Nylon tie

Host x1. Power cord x1. M3 hexagonal screwdriver x1. M4 hexagonal screwdriver x1. M6 hexagonal screwdriver x1. Rubber pad x6. Nylon tie x10. User’s manual x1.

Wiring

First the red end of the power cord is connected to the positive battery of the power supply, while the black end is connected to the negative. Then connect the power cord to the host.

The audio wiring shold not be close to the high-voltage package and spark plug.

Instruction

1. POWER
   Short press to turn on, long press for about 2 seconds to shut down.
   In the power on state and in radio mode, short press to mute, and then short press to unmute; In Bluetooth/USB mode, short press to pause and short press again to unlock the pause.

2. PREV
   Short press to reduce the volume. In radio mode, long press to search for stations at the low end; In Bluetooth/USB mode, long press up to select music.

3. DISPLAY
   Displays the current audio rate and current playback information.

4. NEXT
   Short press to increase the volume. Long press in radio mode to search for stations, and long press in Bluetooth/USB mode to select music.

5. MODE
   Short press in the power-on state to switch radio/Bluetooth/USB mode.

6. Bluetooth connection
   To pair the Bluetooth devices and connect them to the K2 input, short press the mode to switch to Bluetooth mode and voice prompt “Bluetooth” with displays “BT” on the display screen and flashes.
   Then turn on the Bluetooth function of the phone, search for the Bluetooth device “K2-SPEAKER”, and click on the successful connection with a tone, at the same time, the display screen shows “BT” permanently on, indicating that the Bluetooth connection is successful. You can open the mobile music player software to play music.

Installation Instructions

Remove the bracket

Mounting position of calibration bracket

Fixed bracket

Installing the host

Tighten the screws

Loosen the steering fixing screws

Reorientation of the host

Complete

Technical Parameters

Operating voltage ————————–—- 10V-16V
Standby current —————— <2mA o L <1% >85dB
Frequency response ———50Hz-15KHz
FM radio frequency range —————– 87.5-108MHz
Bluetooth connection distance ———– >15m

K-SPEAKER AUDIO
www.kspeaker.com
[email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>