GTL G903 3 in 1 Magnetic Wireless Charging Pad Instruction Manual
- June 9, 2024
- GTL
Table of Contents
G903 3 in 1
Magnetic Wireless Charging Pad
Instruction Manual
Introduction:
- Magnetic wireless charging area for iPhone.
- Wireless charging area for Airpods/enabled wireless charging phones.
- Wireless charging area for iWatch.
- Indicator light: red light, blue light.
- TYPE-C Female.
Operation instructions:
2.1 It’s recommended to use the QC3.0 or PD adapter to connect Type-c port (
When QC3.0 and PD adapter are used, the product defaults to 9V voltage input
).
2.2 The red light is on when the product is powered.
2.3 Charging for iPhone: Place the iPhone flat on the side of the
area with magnetic wireless charger, and the indicator light is blue,
indicating that it is charging normally. 2.4 Charging for Airpod: Put the
Airpods flat on the other side of the wireless charger area to charge, and the
indicator light is blue, indicating that it is charging normally. 2.5 Wireless
charging mode of Apple watch: (1) Place the iWatch wireless charger flat to
charge. (2) Move the wireless charger of the iWatch to the vertical position
to charge.
2.6 iWatch charging: Put the iWatch on the wireless charging area of the
iWatch, align the magnetic attraction, and the watch will light up the
“charging sign”, indicating that it is charging normally.
Specifications:
| Name | 3 in 1 Magnetic Wireless Charging Pad | Model | G903 |
|---|---|---|---|
| Product Size | 234 94 16 (mm) | Power supply Port | Type-C |
| Input | 9V 2A | output power | 18W (Max) |
Cautions
4.1 This product is a three-in-one wireless charger. When all functions are
used at the same time, the power demand is large. It is recommended to use a
power adapter above 18W to power the product, and use a 3A cable to prevent
affecting the charging speed.
4.2 Please fully plug the Type-C power into the port to make sure the charger
is charging.
4.3 Do not put metal foreign objects in the charging area of iPhone, Airpod,
iWatch to ensure effective charging of devices.
4.4 It is recommended that the temperature should not exceed 28ºC, which will
affect the charging speed.
IC Warning
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference;
- This device must accept any interference, including interference that may cause undesired operation of the device.
The information listed above provides the user with information needed to make
him or her aware of a RF exposure, and what to do to assure that this radio
operates within the FCC exposure limits of this radio.
The device complies with RF specifications when the device used at 10cm from
the body.Third-party belt-clips, holsters, and similar accessories used by
this device should not contain any metallic components. Bodyworn accessories
that do not meet these requirements may not comply with RF exposure
requirements and should be avoided. Use only the supplied or an approved
antenna.
FCC Warning
15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help
FCC RF Radiation
Exposure Statement:
- This Transmitter must not be colocated or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 15cm between the radiator and your body.
OST_EU_20220929000019
eVatmaster Consulting GmbH
Bettinastr.30
60325 Frankfurt am Main,Deutschland
contact@evatmaster.com
Made in China
Documents / Resources
| GTL
G903 3 in 1 Magnetic Wireless Charging
Pad
[pdf] Instruction Manual
2A4TT-G903, 2A4TTG903, G903 3 in 1 Magnetic Wireless Charging Pad, G903, G903
Magnetic Wireless Charging Pad, 3 in 1 Magnetic Wireless Charging Pad,
Magnetic Wireless Charging Pad, Magnetic Charging Pad, Wireless Charging Pad,
Charging Pad
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>