baseus CW04 MagPro Magnetic Wireless Charging Car Mount User Manual
- June 16, 2024
- Baseus
Table of Contents
baseus CW04 MagPro Magnetic Wireless Charging Car Mount
MagPro Series Magnetic Wireless Charging Car Mount
Please read this manual thoroughly prior to use, and keep it for future reference.
Installation
- Clip the tail clamp onto the most suitable spot of the air vent
- Place the phone with magnet plate into the mount.
Magnet Plate Installation
- Align the positioning liner with the back of your phone, and find the spot for wireless charging.
- Stick the magnet plate onto your phone’s back.
Product Introduction
This product is a wireless charging car mount that comes with cooling function.
Product Specifications
Name : MagPro Series Magnetic Wireless Charging Car Mount
Model No.: BS-CW04
Input 5V=2.4A; 9V ⎓ 2.5A
Wireless Charging Output : 5W/7.5W/15W
Total Power : 15W
Working Temperature : Non-tropical areas, 0°c to 35 °c
Accessories
- USB-A to USB-C charging cable x 1
- USB-C to USB-C charging cable x 1
Product Introduction
- Wireless charging area
- Cooling fan
- Tail clamp
- USB-C port
- Wireless charging switch
Lighting Effect Instructions
Wireless charging on : Indicator on
Wireless charging off : Indicator off
Attention
- This product is applicable to iP12 and above models, older iP models and Android models need to use with the metal plate;
- Please DO NOT use the product to charge phones with 6mm thick (or thicker) cases, for it may affect the charging efficiency.
- It is compatible with Magsafe phone cases.
- This product supports Q1215W wireless charging, please team with an USB-C to USB-C 3A cable to use.
- Please update your cell phone to the latest version before use.
- Some car models only support 5V ⎓ 1A, please team with a car PD fast charger to use.
Declaration of Conformity
Shenzhen Baseus Technology Co., Ltd. declares that the product is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
https://www.eu.baseus.com
This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Follow local rules and never dispose of the product or batteries with regular household waste.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Ru les. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
| Adesivo di chiusura | Manual |
|---|---|
| PVC3 | PAP22 |
| Raccolta plastics | Raccolta carta |
| Gancio | Manual |
| --- | --- |
| HDPE2 | PAP22 |
| Raccolta plastics | Raccolta carta |
Customer Support
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen
Executive Standard: GB 4943.1
Hotline: 400-071-27ll(China) / + 1800 220 8056(Global)
Website: https://www.baseus.cn (China) / https://www.baseus.com (Global)
Official After-sales E-mail Address:
service@baseus.com (China)/
care@baseus.com (Global)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>