OLIMPIA SPLENDID B1018 Maestro Pro Inverter 12 HP Installation Guide Product Information
- January 13, 2024
- OLIMPIA SPLENDID
Table of Contents
- B1018 Maestro Pro Inverter 12 HP
- Product Information
- Specifications:
- Product Usage Instructions:
- 1. Removing the Front Cover:
- 2. Installing the B1018 Maestro Wi-Fi Accessory Board:
- 3. Connecting the Wi-Fi Board:
- 4. Reassembling and Set Up:
- Q: How do I remove the front cover?
- Q: How do I connect the Wi-Fi board?
- Q: How do I set up the product with the Maestro App?
B1018 Maestro Pro Inverter 12 HP
Product Information
Specifications:
- Model: [Product Model]
- Manufacturer: [Manufacturer]
- Wi-Fi Compatibility: Yes
Product Usage Instructions:
1. Removing the Front Cover:
-
Start by removing the back shoulder section by prying up to get
access to the screws underneath. -
Remove the 2 screws, one on the left and one on the right, to
remove the front shoulder piece. -
Remove the bottom pull-out tray and bar below the supply air to
get access to the final 6 screws to remove the cover.
2. Installing the B1018 Maestro Wi-Fi Accessory Board:
-
On the backside of the unit, remove the access panel in the
upper right corner. -
Locate the accessory board slot.
-
Install the B1018 Maestro Wi-Fi accessory board with the two
provided screws.
3. Connecting the Wi-Fi Board:
-
On the front unit, remove the electrical compartment cover on
the left-hand side to access the control board. -
Remove the communication (comm.) molex plug coming from the
control board to the slot at the bottom of the electrical
compartment. -
Connect the grey comm. cable that is supplied with the B1018
Wi-Fi board. -
Route the cable up and around the back of the unit to the
accessory board. -
Connect the grey comm. cable to the X3 slot labeled
on/off.
4. Reassembling and Set Up:
-
Reassemble the unit.
-
Download the Maestro App from the app store for iPhone or
Android devices. -
Follow the set-up instructions provided in the app.
FAQ:
Q: How do I remove the front cover?
A: To remove the front cover, follow these steps:
-
Start by removing the back shoulder section by prying up to get
access to the screws underneath. -
Remove the 2 screws, one on the left and one on the right, to
remove the front shoulder piece. -
Remove the bottom pull-out tray and bar below the supply air to
get access to the final 6 screws to remove the cover.
Q: How do I connect the Wi-Fi board?
A: To connect the Wi-Fi board, follow these steps:
-
On the front unit, remove the electrical compartment cover on
the left-hand side to access the control board. -
Remove the communication (comm.) molex plug coming from the
control board to the slot at the bottom of the electrical
compartment. -
Connect the grey comm. cable that is supplied with the B1018
Wi-Fi board. -
Route the cable up and around the back of the unit to the
accessory board. -
Connect the grey comm. cable to the X3 slot labeled
on/off.
Q: How do I set up the product with the Maestro App?
A: To set up the product with the Maestro App, follow these
steps:
-
Reassemble the unit.
-
Download the Maestro App from the app store for iPhone or
Android devices. -
Follow the set-up instructions provided in the app.
Technical Service Letter
MAESTRO SMART 9 HP (Model # 02216) B1018 Maestro Wi-Fi kit installation
For Technical Support contact:
Lucas Holleron
[email protected] (800) 408-5196 (ext. 103)
Removing the front cover
To remove the front cover from the unit start by removing the back shoulder section by prying up to get access to the screws underneath. Remove the 2 screws one left and one right to remove the front shoulder piece. Remove the bottom pull out tray and bar below supply air to get access to the final 6 screws to remove the cover.
26
27
1
2
On the back side of unit. Remove access panel in upper right corner.
Here you will find accessory board slot
Install B1018 Maestro Wi-Fi accessory board with two provided screws.
On the front unit, remove electrical compartment cover on the lefthand side. To access control board.
Remove comm. molex plug coming from the control board to the slot at bottom of electrical compartment.
Connect the grey comm. cable that is supplied with B1018 wi-fi board.
Route the cable up and around back of unit to accessory board.
Connect grey comm. cable to X3 slot labelled on/off.
Reassemble unit, download the Maestro App from the app store for iPhone or Android devices. And follow set up instructions.