Kejinming 110K Digital WiFi Photo Frame User Manual

Digital Picture Frame
User Manual 10Kz

Please read this manual before operating your Wi-Fi Cloud Photo Frame, and keep it for further reference.

FCC Warning Statement

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection ‘against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the. instructions, may cause harmful interference to radio communications. However, there is no ‘guarantee that interference will not oceur in a particular installation. If this equipment does ‘cause harmful interference to fadio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient o relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer ‘could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
FCC ID: 2ATFT-TI0K

Contents of box

Please make sure the following items are included in package.
If any iter us damaged or missing, contact us anytime to get a new one for free.

Frame Features

Getting Started

• Install the stand
  Fitinto the frame bracket on the back You can place the frame either in landscape or portrait (we recommend you place it in landscape during the first setup). You can also mount the frame on the wall with the Wall Mount Hole on the back.

• Power on
  Connect the Power Cable to your frame and plug the Power Adapter into the wall socket, the frame will enter the system in seconds.

• Initial settings
  There are several niial sattings (Wi-Fi, Device info, Sleep Mods, etc:) when you entr the system forthe first time.

• Connect to Wi-Fi
  Select the Wi-Fi network you would like to connect and enter the password if required.
  If your Wi-Fi network is not on the list, move your frame closer to your rauter, wait for seconds and check it again

• Download the Uhale App
  To send photos to your frame, by using the Uhale App for iOS or Android

Download App
Search for Unale on App store / Google Fiay
Scan the QR code to download and instal it on the mobile device.

https://cache.zeasn.tv/webstatic/whalephoto-download-web/index.html

• Quick setup
When starting your frame for the first time, you will need to setup the frame.

1. Uhale Frame may request to upgrade to the latest version. If so, it is recommended to upgrade the photo frame before proceeding
2. Choose a language you preferred as default
3. Connect the photo frame to the Internet via Wi-Fi
4. Set the date, time and set the time zone if needed.
5. Name the photo frame (E. Jack’s Frame); Set the location of the photo frame (Eg. Living Room, Kitchen, Office).
6. Chack the quick guide on the Unale frame.

• Bind your frame

1. Make sure that your friend has downloaded and installed the Unale App.
2. Click the Add friend icon on your frame . A dilog will appear showing both QR code and SN code (valid for 12 hours).
3. Now share either the QR code or the SN code through your preferred way Eg. SMS, M, phone call to your friend.
4. Once the frame is connected to your friend’s Unale App, you will be able to find them on the sharing st on the frame.

• Navigating your frame
Younteract with your frame through its touchscreen
Swipe left and right to browse photos, photos can be automatically rotated. To access the menu bar, simply tap once on the screen, this wil show the menu.
In the menu you will find quick access to the add friends and the settings.
From the menu it is also possible to make relevant settings for the currently displayed photos, such as hide, adjust, Repeat all Sideshow.

Share photos

You can share photos/videos in four ways
1. Uhale APP
Quick Setup
APPis equivalent to a transfer tool,you can log in with a visitor account of with an email account Visitor accounts: The data will not be saved in the cloud, the accounts created are temporary.
As long as you uninstall or reset APP, the temporary account and the information generated by the account will all be deleted.
Email account: The cloud will keep your usage data (such as avatar, nickname, photo frame binding relationship), and the data will exist when you uninstall/reset the app or change your phone to login.
Photo Share
Shering photos is divided into picture share and video share,
Photo share: select pictures (up to 50 pictures) – select photo frames -edit pictures (adjust focus areas and name photes) – send. Video share: select video (only one video can be selected, video up to 30 seconds long) – sellct photo frame – edit video (video length and video naming) – send. History
You can check the status of photo sending tasks and perform some quick actions on the sending history side.
Delete: Deletes local history data (does not delete framed photos).
Clear: clears the history data (does not delete the task in the sent state).
Resend: you can resend this photo to other frames.
Withdraw: Deletes local history data and frame photos, as long as the history record on the app exists and the frame is online, you can withdraw the photos. 2. Uhale Web
Uhale Web is a pc online transferring tool for Unale Frames. Through the Unale Web, you can share up to 500 photos to the photo frame at once.
Log in and log out
Scan code login
Visit the website to get access to Uhale Web: https://uhale.zeasn.tv
Download, install, and open the Uhale APP on your mobile device, find the QR code [scan] below to log in, or use visitor /Account Login.
Note: After successfully logging in, the webpage will automatically synchronize the information in the APP/Account (such as avatar, nickname, and connected device). Log out
To switch accounts for sharing, Log out the current account in the upper right comer, and scan the code to log in another account.
Photo sharing
Photo selection After logging in,select photos to share in two ways.

1. Glick the button to open the local folder and select photos;
2. Drag photos or a folder directly to the area, then click [Next] to upload:;

NOTE

1. Hold down Gl to select batches or drag photo(s) to the arec.
2. Currently supported photo formats: JPG, JPEG, PNG, BMP.

Photo editing
When the photos are on the list to be transferred, you can edit the photo information, such as adding photos onto the existing lst, renaming and removing photos, and more. Renaming a photo: Supports name re- editing for a selected photo NOTE:
Exit the editing mode, select a photo frame to complete photo sharing. Photo(s) cannot be shared under eciting mode.
Frame selection
When finishing editing all photos, click [Next] to select a photo frame. If there is & binding device, the online photo frame information will be displayed; and there is no binding device, you will be prompted to go to the APP to bind one.
Offline display: Online display: Send
Select the photo frame and click [Send]. Then, a task will be created in the taskbar.
Check the photo sending progress on the page or click [History] to view it. Profile
Basic information is displayed under the profile section.

1. Connected frames: Display information of connected frames, name, iocation and status.
2. Privacy Policy: Displays Privacy Policy and Terms of Use.
3. Support: displays contact information of the support team.

Photo sharing
The Taskbar displays the photo transfer tasks for users to check sending progress.
The Taskbar supports quick operations, including re-send, withdraw, delete and more.

1. View history: Click [View History] to jump to the history record. The functions of the history record are the same as Taskbar; but in here, you can view the transmission details of a single task.
2. Maximize/Restore down the Taskbar: When the taskbar is maximized, scroll up and down to view each transmission task; restore down to display in a smaller window.
3. Resend: Re-select the photo frame to send the photo(s) again.
4. Withdraw: Withdraw photo(s) from the photo frame.
5. Delete: Delete current task.

History
History obtains the same functions as Taskbar but in here, you can view the details of a task to check the transferring status of photo(s) (successful, transferring, failed).
3. SD Card
You can copy photos and videos to SD card, then insert the SD card into the frame, and import photos to the frame through [Frame] — [Settings] — [Manage Photos] – [Import Photos].
Direct playback of photos from SD card without importing.
4. USB
You can copy photos and videos to the USB flash drive, then nsert the USB flash drive nto the photo frame, then mport photos to the photo frame through [Frame] – [Settings] – [Manage Photos] – [Import Photos].
Direct playback of photos from USB flash drive without mporting.

Photo management

• Memory usage
  The Manage Photo section shows you the number of photos stored n the frame and the storage space occupied/remained.

• Show/Hide photos
  Select the photo you want to hide by tapping the photo. Hidden photos will not be deleted from the frame and can be re-displayed at any time. Use to select or deselect all photos.

• Favorite photos
  Select the photo you want to remove from the favorite photos by tapping the photo.

• Delete photos
  Select the photo you want to permanently delete from the frame by tapping the photo.
  Use to select or deselect all and to delete the selected photos.
  You can also withdraw photos/videos which are already sent to frame from Uhale mobile opp (note: withdraw only works when history is retained and frame stays online).
  To withdraw: In Uhale “history” – select the con of the ones you would like to withdraw.

• Import photos
  Allows you to import photos from a SD card/USB flash drive.
  –How to import photos to your frame?
  1. Insert a SD card/USB flash drive into your digital frame.
  2. Select the photos you want to import into the photo frame.
  3. Tap on the import button to start the import process.
  Once the import process is complete, your selected photos will be available for display on yourn digital picture frame.

• Export photos
  Allows you to export photos from the digital frame to a SD card/USB flash drive.
  –How to export photos from your frame to a SD card/USB flash drive?
  1. Select the photo you want to export from the photo frame.
  2. Tap the export button to start the export process.
  Once the export process is complete, the selected photo will be saved onto the SD card/USB flash drive, allowing you to transfer it to other devices or store it as a backup.

• Best wishes
  Here you can view the history of blessings received, ncluding time, title, sender, etc.

Manage account

This contains all connected accounts that are authorized to send photos to your frame .

• Adda new account
  To add a new authorized account, tap the device share button, and then share the displayed SN or QR code you preferred with your friend

• Account Settings
  1. Remove an account: Once an account is removed from your frame, it will no onger be able to share photos with your photo frame.
  2. Delete shared photos: You can delete all photos that were shared by a specific account.
  3. Delete the account (without deleting the shared photos): This option allows you to remove an account from the list without deleting any of the photos that were shared by that account.

Functional Overview

Settings

My frame| Frame name| Set/Change the name of the frame. The frame name is also displayed in connected mobile devices, under the list of connected photo frames in the App.
---|---|---
Frame location| Set/Change the location of the photo frame. This location is displayed in the list of connected photo frames of your friends and family, helping to identify multiple frames.
Time zone| Set time zone for a photo frame.
Language| Set language used for a photo frame.
Automatic date&time| Use network-provided time.
Set date/time| The date and time can be manually adjusted after the automatic date&time is turned off.
Enable/Disable 24-hour clock| Enable and disable the 24-hour clock.
Power| Power off / Restart / Sleep
Ambient light| Select the color of the ambient light Turn off/on ambient light Turn off/on automatically adjust colors Adjust the brightness of the light
---|---
Display settings.| Brightness level| Adjust photo frame brightness.
---|---|---
Show caption| There are 3 display modes to choose from.
Show favorite| The “favorite button can select turn off or on.
Text size| There are 4 Font sizes for selection.
Ambient clock| Once enabled, a clock will be displayed when the photo frame is in sleeping mode.
Sleep mode| when the sleep mode s on, the screen is turned off during a specific time to reduce energy consumption.
The default setting is to turn off the screen at 20:00 and turn t back on at 08:00. This can be changed by setting
your preferred sleep mode start time.
Photos can still be received when the sleep mode is on.
Weather & Time| Enable and disable the weather and time. When enabled, the weather and time are displayed on the home page, and when disabled, they are not displayed.
Set weather| View weather specific information and search to switch to other cities.
Temperature unit| Supports Celsius and Fahrenheit switching.
Photo settings| Timer| Set the photo display time interval.
---|---|---
Fill frame| This function is to change the scaling of all current photos on the frame or not.
Slideshow| There are four slides to choose from here, Default, Shuffle, Scale In Out, Accordion
Photo display order| Set the order of photo rotation.
–By date: Photos are displayed in chronological order –According to user: display by friend
–Shuffle: The photos are displayed randomly
Video related settings| Video Autoplay: when turned on, video will be automatically played; when turned off, video will be paused.
Playback Audio: when turned off, the video will be muted; when turned on, the video will be played with a preset volume.
Video volume setting: Adjust the video volume of the photo frame.
Playback Mode| Repeat all/Single repeat
Notifications| Notification volume| Adjust the notification volume of the photo frame.
---|---|---
Touch sounds| Turn on/off
Show Notifications| Enable for notification, disable to stop(Wi-Fi connection, New friends, Storage space, New photos)
Backup and restore| Backup| Backup frame to external storage (e.g. SD card/USB flash drive) Tap to make a backup of your photos. The time of the last successful backup is also displayed here. Any existing backup on the external storage will be overridden!
---|---|---
Restore from backup| Before you attempt to restore your frame, start by confirming that your backup is up-to-date. This is done
by confirming the date under Backup” frame to external storage (e.g. SD card/USB flash drive). if e.g. the last
backup is too old or if no backup is made, then press the “Backup” frame external storage (e.g. SD card/USB flash drive)button* to make a new backup.
NB: If you wish to restore a backup on a frame that has already been set up, please make sure that both frames
are updated to the latest version beforehand.
Reset Frame| This is done by pressing the “Reset Frame” button.
This operation will delete all the data on the frame and reset the frame to its factory preset values. After a
successful reset, select the “Restore from backup” button to restore the data.
WiFi| Set the Wi-Fi connection, Wi-Fi details, Add a hidden Wi-Fi, Refresh Wi- Fi list
---|---
Help| Give feedback, FAQ, Guide, Privacy policy, App download, Support
---|---
About| Software version update, Build Number, System version, MAC, Terminal ID
---|---

More meaningful functions

• Favorite
  Click the on the screen to favorite the current photo or video.

• Best wishes
  Show the wishes sent by your family or friends.
  You can manage the blessings in [Settings] – [ Manage photos] – [Best wishes] .

How to send out wishes?

1. Open the Uhale APP on your phone. Tap the [Gift] icon.
   Note: Please upgrade the APP to version 3.14 or above.

2. Write down your wishes in text.

3. Select a style.

4. Choose a frame (s) you would ike to send wishes to.

FQA

icon, select a style, edit the text and send it to the photo frame which would like to send wishes to.” image-9=”” count=”10″ html=”true” css_class=””]

Contact Us

• If there is a malfunction of the machine or damage to any part of the machine, stop using it and consult a licensed electrician for repairs.
• Do not attempt to modify or repair the machine yourself. If you have any problem with the product, please don’t hesitate to email us at:
  110kz-uhale@eitack.com
  We will reply to you within 24 hours and give you the best solution. Thank you!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>