Vantron 9260NG Media Player User Manual

Vantron 9260NG Media Player

Product Information

Specifications

• Product Name : VT-HMI101-RK68J-EVSE-L
• Model Number : 9401-3HDT-V01
• Product Version : 1.0
• Date : Feb 1, 2023

Foreword
The 9401-3HDT-V01 User Manual (HW) provides detailed instructions on the hardware usage of the product. It is important to read and understand this manual before using the product to ensure proper operation and avoid any potential issues.

Copyright Notice: While all information contained herein has been carefully checked for accuracy, Vantron assumes no responsibility for any errors or features of this manual or the software. Please contact our technical department for relevant operation solutions if you encounter any problems that cannot be solved according to this manual.

Table of Contents

1. Foreword
2. Overview
3. Introduction
4. Order Information
5. 9401-3HDT-V01 Hardware Instructions
6. Hardware Description
7. Connector Identification
8. Locate the Connector
9. Confirm the Pin Direction
10. Connector Description
11. Power (DC 19V) Connector
12. Ethernet (LAN) Connector
13. Tips
14. Appendix A: How to Contact Us

Product Usage Instructions

Overview
The VT-HMI101-RK68J-EVSE-L is a hardware product designed for specific applications. This section provides an introduction and order information for the product.

Introduction
The VT-HMI101-RK68J-EVSE-L is a high-performance hardware device that offers advanced functionality for various purposes. It is equipped with features that enhance user experience and ensure reliable performance.

Order Information
When ordering the VT-HMI101-RK68J-EVSE-L, please provide the following information

• Product Model : 9401-3HDT-V01
• Product Version : 1.0
• Date : Feb 1, 2023

9401-3HDT-V01 Hardware Instructions
This section provides detailed instructions on how to use the 9401-3HDT-V01 hardware.

Hardware Description
The hardware description section provides information about the connectors and their identification.

Connector Identification
The 9401-3HDT-V01 hardware has various connectors that serve different purposes. It is important to identify these connectors correctly.

Locate the Connector
To locate a specific connector, refer to the provided documentation or follow the guidelines mentioned in this manual.

Confirm the Pin Direction
Before connecting any cables or devices to the connectors, ensure that the pin direction is correct to avoid any damage or improper functioning.

Connector Description
This section provides a detailed description of the connectors present in the 9401-3HDT-V01 hardware.

Power (DC 19V) Connector
The power connector is used to supply DC 19V power to the hardware. Ensure that the correct power source is connected and that the connector is securely plugged in.

Ethernet (LAN) Connector
The Ethernet connector is used to establish a network connection for the hardware. Connect an Ethernet cable from the LAN port of the hardware to a compatible network device to enable network
connectivity.

Tips
This section provides additional tips and recommendations for using the VT- HMI101-RK68J-EVSE-L hardware effectively and efficiently.

Appendix A: How to Contact Us
If you have any questions or need further assistance, please contact Chengdu Vantron Technology, Co., Ltd. using the provided contact information in this appendix.

FAQ

• Q: What should I do if I encounter a problem that cannot be solved according to the manual?
  A: If you are unable to resolve an issue using the instructions provided in this manual, please contact our technical department for relevant operation solutions.

9401-3HDT-V01
(Hardware) User Manual
Product Version : 1.0
Date: Feb 1, 2023
For any question, please contact Chengdu Vantron Technology, Co., Ltd.
Hardware User Manual
Copyright © Vantron Technology Co., Ltd. All rights reserved.

Change History

This table describes the versions and release date.

Foreword

Copyright Notice
While all information contained herein have been carefully checked to assure its accuracy in technical details and printing, Vantron assumes no responsibility resulting from any error or features of this manual, or from improper uses of this manual or the software. Please contact our technical department for relevant operation solutions if there is any problem that cannot be solved according to this manual.
Vantron reserves all rights of this manual, including the right to change the content, form, product features, and specifications contained herein at any time without prior written notice.
The trademarks and registered trademarks in this manual are properties of their respective owners. No part of this manual may be copied, reproduced, translated or sold. No changes or other purposes are permitted without the prior written consent of Vantron.
Vantron reserves the right of all publicly-released copies of this manual.

Symbol Conventions
The symbols that may be found in this document are defined as follows.

Statement
It is recommended to read and comply with this manual which provides important guidance and helps decreasing the danger of injury, electric shock, fire, or any damage to the device.

Disclaimer
Vantron assumes no legal liability of accidents resulting from failure of conforming to the safety instructions.

Limitation of Liability/Non-warranty
For direct or indirect damage to this device or other devices of Vantron caused by failure of conforming to this manual or the safety instructions on device label, Vantron assumes neither warranty nor legal liability even if the device is still under warranty.

Safety Instructions

•  Keep and comply with all operation instructions, warnings, and information.
•  Pay attention to warnings on this device.
•  Read the following precautions so as to decrease the danger of injury, electric shock, fire, or any damage to the device.

Precautions

•  Pay attention to the product labels/safety instructions printed on silk screens.
•  Do not try repairing this product unless declared in this manual.
•  Keep away from heat source, such as heater, heat dissipater, or engine casing.
•  Do not insert other items into the slot (if any) of this device.
  •  Keep the ventilation slot ventilated for cooling.
  •  System fault may arise if other items are inserted into this device.
• Installation : ensure correct installation according to instructions from the manufacturer with recommended installation tools.
•  Ensure ventilation and smoothness according to relevant ventilation standard.

Safety Instructions for Power Cables and Accessories

Use proper power source only
Start only with power source that satisfies voltage label and the voltage necessary according to this manual. Please contact technical support personnel of Vantron for any uncertainty about the requirements of necessary power source.

Use tested power source
This product still contains a button lithium battery as a real-time clock after its external power source is removed and therefore should not be short- circuited during transportation or placed under high temperature.

Place cables properly
Do not place cables at any place with extrusion danger.

Cleaning Instructions

• Please power off before cleaning the device.
• Do not use spray detergent.
• Clean with a damp cloth.
• Do not try cleaning exposed electronic components unless with a dust collector.
•  Support for special fault: Power off and contact technical support personnel of Vantron in case of the following faults:
  • The device is damaged.
  • The temperature is excessively high.
  •  Fault is still not solved after the operation according to the manual.

 Overview

Introduction
Vantron offers Intel X86-based Single Boards Computer (SBC) platforms including Intel® Atom™ APL-I E3900 series, Intel® Atom™ Bay Trail E3800 series, Intel® Atom™ Denverton C3000 series, Intel Core™ SKL i3-i7 series and Intel Core™ TGL i3-i7 series processor boards. In additional to offering the standard SBCs, we also provide professional customized board design services. Our seamless project management, efficient error-free development process, strong fundamentals in technology, sufficient human resources, and on-time delivery will guarantee the success in your project development.
With the idea of “Application Ready” products and services, our embedded computers have embedded basic operation systems which include the drivers of its interfaces. So, it is easy to use and you only need to add your application software. It can speed Time to Market of your products, and save more cost.

 Order Information **

**

Table 2-1 describes the order information.

Table 2-1 Order Information

Order Information

9401-3HDT-V01| X86 PCBA, I7-1195G7,8GB,128GB,4USB,1xLAN,HDMI,3xHDBase-T,RoHS

 9401-3HDT-V01 Hardware Instructions

9401-3HDT-V01 is developed based on Intel Tiger Lake I7-1195G7 series.

Product Appearance and Interfaces
Figure 3-1, Figure 3-2, and Figure 3-3 show the top view, right view, and front view of our products.

 Features

The features of Vantron 9401-3HDT-V01 Board are listed in Table 3-1.

Features

• Processor, Intel® Core™, I7-1195G7, Quad core, 2.9GHz(5Ghz Turbo)
• Processor, Intel® Core™, I7-1185G7E, Quad core, 1.8GHz(4.4Ghz Turbo)

  2xDDR4 SO-DIMM socket, default 8GB (up to 32GB supported)
  1xM.2 M-KEY 2242/2280 Slot, SATA/PCIE protocol supported ;default 128GB SATA SSD
1xWireless-AC 9260 M.2 2230, 2×2 WiFi/BT, Gigabit
1xHDMI Connector
  3 x HDBase-T Ports
2xUSB 3.0 Type-A
  1×10/100/1000M Ethernet LAN port
FTPM Supported
RTC Supported
Smart FAN Supported
  15-36V Power Supply
  Win10 IoT Ent. /Win11 /Linux

Board Diagram

Figure 3-4 shows the board diagram of our product.

 Specifications

Table 3-2 describes the CPU board specifications.

Media Player Specifications

System
Display

Peripheral I/O

Software

| Processor

RAM

| Processor, Intel® Core™, I7-1195G7, Quad core, 5.0GHz (Max) (optional I7-1185G7E)
2XDDR4 SO-DIMM (Default 8GB max 32GB)
ROM

Resolution

| 1xM.2 M-key 2242/2280 SSD Slot (Support both SATA and PCIE bus, Default Capacity is 128GB)
1xSATA3.0 Connector
HDMI 1.4b 3840×2160@30Hz

3xHDBT   1920 x 1080 @ 60Hz

LAN

M.2

| 1×10/100/1000M Ethernet, RJ45
1xM.2 B-KEY,1xM.2 E-KEY
Security

USB

| 1xTPM
2xUSB 3.0 Type-A
Fan

Front Button

| 2xStandard Fan Connector
1xStandard Power/reset Button, LED
RTC

OS

| Supported
Win10/Win11 or Linux
Power

Mechanical

Environment Condition

| Input

Consumption

| 19V Power DC Input
Max 60W
Dimensions

Gross Weight

| 214 x 181 x 40mm
TBD KG
Temperature

Humidity

| Operating : 0℃ ~ 35℃
10-85%RH(Non-Condensation), operating and storage
Cooling Mode

Approvals

| Fan, heat sink
RoHS compliance
IP Level               IP40

Part Placement

Figure 3-5 and Figure 3-6 show positions of main ports.

Dimensions
Figure 3-7 shows the dimensions of the media player.

Hardware Description

This chapter describes the hardware features such as switch, jumper, connector and PIN functions.
The interface description is based on the connector sketch map. Necessary messages, such as pictures, are attached.

Connector Identification
This section describes how to locate the connector and PIN1 on 9401-3HDT-V01 single computer board.

Locate the Connector
Figure 3.6 shows the positions of main ports and connectors on the 9401-3HDT-V01.

Confirm the Pin Direction
There is a pin number order in all Vantron products. Figure 4-1 indicates each pin’s number, as shown on the top side (component side) of the main board. On a double-row connector, odd numbers and even numbers are placed in two rows separately. Confirm the Pin1 of the connector and jumper according to the below method:

1.  Usually, there is a number or mark on the connector of the main board, such as trigonal mark. Dot and number “1” both indicate the pin1 of the connector.
2. For the hole connector, you can see the pin number on the reversed side.
3. Download the mechanical drawing of 9401-3HDT-V01 from Vantron technology or Vantron website: www.vantrontech.com.

Connector Description

Table 4-1 Figure Type

Table 4-2 Signal Type

Power (DC 19V) Connector

Specifications : 2.5mmD, 5.5mmD, 5A, Male, RA, WDT, THR, RoHS
CUIINC : PJ-082BH

Ethernet (LAN) Connector
Specifications : standard RJ45 interface, supporting 10M/100M/1000M Base-T LED: L-Y; R-G.
UNE : B50 (02-41) G8-140-A123-B52
When the yellow LED on the left goes on, it indicates LINK UP ; when the light blinks, it indicates Activity. When the green LED on the right goes on, it indicates that the link speed is 100/1000M.

 USB3.0 (USB3.0) JACK

Specifications : 3.0, Type A, 2 Port, female, 17.5mml, right angle, WDT, THR, RoHS
FOXCONN : UEA1112C-8HS1-4F
U116 USB3.0 JACK meets the standard USB3.0 PIN definition.

Video Output
Specifications: Type-A, FLN, Female, Right Angle, WDT, SMT, RoHS MOLEX: 500254-1931

 HDT-A Connector

Specifications : standard RJ45 interface, supporting 10M/100M/1000M Base-T LED: L-Y; R-G.
UNE : B50 (02-41) G8-140-A123-B52
When the yellow LED on the left goes on, it indicates that the HDMI is active.
When the green LED on the right goes on, it indicates that the HDBase-T is linked up.

HDT-B Connector
Specifications : standard RJ45 interface, supporting 10M/100M/1000M Base-T LED: L-Y; R-G.
UNE : B50 (02-41) G8-140-A123-B52
When the yellow LED on the left goes on, it indicates that the HDMI is active.
When the green LED on the right goes on, it indicates that the HDBase-T is linked up.

HDT-C Connector
Specifications : standard RJ45 interface, supporting 10M/100M/1000M Base-T LED: L-Y; R-G.
UNE : B50 (02-41) G8-140-A123-B52
When the yellow LED on the left goes on, it indicates that the HDMI is active.
When the green LED on the right goes on, it indicates that the HDBase-T is linked up.

HDT-D (OPT) Connector
Specifications : standard RJ45 interface, supporting 10M/100M/1000M Base-T LED: L-Y; R-G.
UNE : B50 (02-41) G8-140-A123-B52
When the yellow LED on the left goes on, it indicates that the HDMI is active.
When the green LED on the right goes on, it indicates that the HDBase-T is linked up.

WLAN RF
Specifications : SMA, WDT, SMT, RoHS

 PWR Button

Specifications : 7.5mm, 8.7mmH, WDT, SMT, RoHS
CHA : C602B-5H7RFL-14-101

RESET Button
Specifications : 7.3mm, 6.25mmH, WDT, SMT, RoHS
CHA : CTSAB-62N-V

Power Characteristics
For players only, the power supply is DC 12-36V. To use the 9401-3HDT-V01 player, the minimum adaptor power is 36W. For the best performance of player, we recommend the adaptor power should be 65W or above.
For other external devices, the power consumption is related to connected device such as USB storage, HDMI, and HDBase-T.

Hardware Operation Notes

•   Power preparations : Please confirm that the power input is 19V (12-36V) and the recommended current is 3.25A. Make sure the plugs are not connected reversely.
•   Environments : For the assembled or debug platform, be sure that there is no risk of short circuit for the board and that ESD protections are taken.

Tips

Waste Disposal

It is recommended to disassemble the device before abandoning it in conformity with local regulations. Please ensure that the abandoned batteries are disposed according to local regulations on waste disposal. Do not throw batteries into fire (explosive) or put in common waste canister. Products or product packages with the sign of “explosive” should not be disposed like household waste but delivered to specialized electrical ＆ electronic waste recycling/disposal center. Proper disposal of this sort of waste helps avoiding harm and adverse effect upon surroundings and people’s health. Please contact local organizations or recycling/disposal center for more recycling/disposal methods of related products.

Comply with the following safety tips

• Do not use in combustible and explosive environment
• Keep away from combustible and explosive environment for fear of danger.

Keep away from all energized circuits
Operators should not remove enclosure from the device. Only the group or person with factory certification is permitted to open the enclosure to adjust and replace the structure and components of the device. Do not change components unless the power cord is removed. In some cases, the device may still have residual voltage even if the power cord is removed. Therefore, it is a must to remove and fully discharge the device before contact so as to avoid injury.

Unauthorized changes to this product or its components are prohibited
In the aim of avoiding accidents as far as possible, it is not allowed to replace the system or change components unless with permission and certification. Please contact the technical department of Vantron or local branches for help.

Pay attention to caution signs
Caution signs in this manual remind of possible danger. Please comply with relevant safety tips below each sign. Meanwhile, you should strictly conform to all safety tips for operation environment.

Notice
Considering that reasonable efforts have been made to assure accuracy of this manual, Vantron assumes no responsibility of possible missing contents and information, errors in contents, citations, examples, and source programs.
Vantron reserves the right to make necessary changes to this manual without prior notice. No part of this manual may be reprinted or publicly released in forms of photocopy, tape, broadcast, e-document, etc.

FCC compliance statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

1.  this device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Exposure to radio frequency energy
The radiated output power of this device meets the limits of FCC radio frequency exposure limits. This device should be operated with a minimum separation distance of 20 cm (8 inches) between the equipment and a person’s body.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISED Canada compliance statemen

This device complies with ISED Canada license-exempt RSS standard(s). Operation is subject to the following two conditions

1. This device may not cause interference, and
2.  This device must accept any interference, including interference that may cause undesired operation of the device.

Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Exposure to radio frequency energy:
The radiated output power of this device meets the limits of ISED Canada radio frequency exposure limits. This device should be operated with a minimum separation distance of 20 cm (8 inches) between the equipment and a person’s body.

Appendix A: How to Contact Us

If you have any problems or suggestions, or want to know more about our products, visit www.vantrontech.com.

• US Office : Vantron Technology, Inc.
• Address : 440 Boulder Court, Suite 300, Pleasanton, CA 94566, USA
• Tel : 925-621-8758
• Email : sales@vantrontech.com
• China Office : Chengdu Vantron Technology, Ltd
• Address : 6th Floor, 1st Building, No.9, 3rd Wu Ke East Street, Wu Hou District, Chengdu 610045, China
• Tel : 86-28-8512-3930/3931, 8515-7572/6320
• Email : sales@vantrontech.com.cn

References

• Vantron Technology

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>