Skmei 0966 Watch Instruction & Manual
- June 7, 2024
- Skmei
Table of Contents
Skmei 0966 Watch Instruction & Manual
Skmei watch direct sales
Operation Manual
A. Features
- In normal mode: Display hours, minutes and seconds, week.
- 29 Time Zone and Daylight-saving Time function
- 4 set the Alarm function, 1 Snooze function, Chime function
- 60 minutes countdown function
- 1/90 Stopwatch function
- LED back light function
B. Operational Manual
In normal mode ,Press A key for LED light ON.Press D key to display Month and
Date. Press B key to convert
the MODE as following:
In Normal Time Model Hold C key for 2 seconds to enter into time setting mode,
“seconds” flashing, press the
B key to to choose the object as following:
-
Press D key, plus 1 for the object, if hold D key will increase rapidly.
-
Press A key, reduce 1 for the object, hold A key will reduce rapidly.
-
When set the object of “Time Zone”, press D key to upward the Time Zone ,press A downward Time Zone
-
When set the object of “Daylight-saving Time”, press D key to OFF/ON, if display “DST” means ON, otherwise means OFF.
-
When set 12/24H format, press the D key to convert it
-
When set the object of “seconds”, if the seconds within 0 ~ 29 seconds, press the D key the seconds
will back to 00; if within 30~59 seconds, press D key back to 00, at the same time the minutes will plus 1 minutes. -
When set “year”, “month”, “day”, press A/D key to adjust, and the week will adjust automatically according to date.
-
When set the “LED” lighting time , the icon of ” ” flashing, press D convert to ” “.
If the icon been setted to ” “, the LED light ON for 1 seconds,
If the icon been setted to” “, the LED light ON for 2 seconds
World Time Mode
In Word Time Mode:
- Press “C” key for 2 seconds to ON/OFF the Daylight-saving Time, if ON will show icon of “DST” ,otherwise will disappear.
- Press D key to choose time zone, hold D key to choose time zone quickly.
Countdown Mode
- The max countdown range is 60 minutes, the default countdown range is 5 minutes.
- Press D key to start/pause the countdown.
- When the countdown is processing, press D key to pause,then C key to return to the original set
value.
Countdown time Setting
-
In countdown mode, press the C key for 2 seconds the Hour flashing, enter into countdown time
setting state. Press the B key to choose the object: Hours→ Minutes→ Seconds -
Press D key, plus 1 for the object, if hold D key will increase rapidly.
-
Press A key, reduce 1 for the object, hold A key will reduce rapidly.
-
Press B key enter into circulation countdown setting state, press D key to convert.
means when the countdown over, will automatically back to original set value. means when countdown over will automatically circulation countdown. means ON/OFF warning tone. If ON, when the countdown less than 30 minutes, the warning tone will prompt .
- Press C key to exit
Stopwatch Mode
- In stopwatch mode, press D key once to start, press D key again to suspend.When suspend, press C key back to 0:00:00.
- In stopwatch mode, press D key to start, press C key enter into split function.press C key again to get the record and the stop watch still processing in the back ground. Press D key to suspend.press C key back to 0:00:00
Alarm Mode
In alarm mode, press D key to choose “SIG( Hourly chime),” “AL1 ~ AL4” (four
sets alarm) and “SNZ” (snooze
function) :
- Press C key to ON/OFF Alarm function, if the icon “ALM” show means ON, otherwise means OFF
- Hold C key for 2 seconds the “Hours” flashing, press B key to choose hours ↔ minutes
- Press D key, plus 1 for the object, if hold D key will increase rapidly.
- Press A key, reduce 1 for the object, hold A key will reduce rapidly.
- In AL1 ~ AL4, if the time is alarm time, the alarm will chime for 20s, press any to to stop chime.
- In SNZ (snooze function) if the time is alarm time, the alarm will chime for 20s, then every 5 minutes will chime 20s, till the alarm chime 7 times then stop.
- If SIG (Hourly chime) ON, then icon of ” ” will display and the alarm will chime every hour .otherwise have no this icon .
- Press C key to exit .
Adjust the hands
- In Hands adjust mode, hold C key until the time flashing enter into Hands setting mode, hold D to adjust the hands time.
- press C key to exit
Remark: after replace the battery, LCD will display12:00: 00 and
flashing, means automatically enter into
the hands adjust mode.
Downloads
Skmei 0966 Watch Instruction & Manual – Download [Optimized PDF]
Skmei 0966 Watch Instruction & Manual – Download [Original PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>