MITSUBISHI ELECTRIC MAC-588IF-E Wi-Fi Lossnay Control User Guide

MITSUBISHI ELECTRIC MAC-588IF-E Wi-Fi Lossnay Control

Product Information

Specifications

• Wi-Fi Interface Model: XXXXXXXX
• MAC: XXXXXXXXXXXX
• ID: XXXXXXXXXX
• SSID: XXXXXXXXXXXX
• KEY: XXXXXXXXXXXX
• VOLTAGE: CURRENT
• Manufacturer: MITSUBISHI ELECTRIC CORPORATION

Product Usage Instructions

1. Set up Wi-Fi Interface
   To set up the Wi-Fi interface, follow the steps below:

2. Ensure that your Wi-Fi Interface is WPA2-AES 2.4GHz enabled.

3. If the setup fails, perform a RESET by holding down the RESET button for 14 seconds.

4. Check if the MODE LED indicator blinks every second.

5. Initiate a SCAN to search for available Wi-Fi networks.

6. Take note of the Wi-Fi INTERFACE MODEL, MAC, ID, SSID, KEY, VOLTAGE, and CURRENT values displayed.

7. 2. Connect to Home’s Wi-Fi Network
   To connect the Wi-Fi Interface to your home’s Wi-Fi network, follow these steps:

8. Open the Wi-Fi Control App on your device.

9. Select your home’s Wi-Fi network from the available networks.

10. Enter your home’s Wi-Fi password.

FAQ (Frequently Asked Questions)

1. My Wi-Fi Interface is not connected to any router.
   If your Wi-Fi Interface is not connected to any router, please try the following:

   • Restart the setup process.
   • Check if your router is properly connected to the Wi-Fi Interface.

2. My Wi-Fi Interface is not communicating to my router.
   If your Wi-Fi Interface is not communicating with your router, please perform the following steps:

   • Restart the setup process.
   • Check the Wi-Fi settings on your router and ensure it is compatible with the Wi-Fi Interface.

3. My router is not communicating to the internet.
   If your router is not communicating with the internet, pleas check the following:

   • Ensure that your internet connection is active and functioning properly.
   • Restart your router and try again.

4. How do I perform a RESET?
   To perform a RESET on the Wi-Fi Interface, follow these steps:

5. Press and hold down the RESET button for 14 seconds.

6. Where can I find more information on setting up the Wi-Fi Interface?
   To find more information on setting up the Wi-Fi Interface, please refer to the Installation Guide that came with your device. You can also download it from the Wi-Fi Control App under ‘Support’. Alternatively, you can follow the ‘How to Setup’ instructions from the Wi-Fi Control App under ‘Support’.

Wi-Fi Interface Setup Quick Reference Guide

Set up

MAC-588IF-E Troubleshooting

Your Wi-Fi Interface is not connected to any router

• Try pairing the Wi-Fi Interface with the router. Please start setup again.
• Your Wi-Fi Interface is not communicating to your router
  • Check DHCP settings of the router.
  • Check IP address settings of the Wi-Fi Interface.
• Your router is not communicating to the internet
  • Check DNS settings of the router. or
  • Check DNS address settings of the Wi-Fi Interface.

To Reset

If you have any issues and need to start setup again, hold down the RESET button for 14 seconds.

For more information on how to setup the Wi-Fi Interface, please see the Installation Guide that came with your Wi-Fi Interface and is available to download from the Wi-Fi Control App under ‘Support’, or follow the ‘How to Setup’ instructions from the Wi-Fi Control App under ‘Support’.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>