cecotec Pinkycare 700 Perfect Nails Instruction Manual

: June 16, 2024
: cecotec

Table of Contents

SAFETY INSTRUCTIONS
PARTS AND COMPONENTS
BEFORE USE
OPERATION
CLEANING AND MAINTENANCE
TECHNICAL SPECIFICATIONS
DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
TECHNICAL SUPPORT AND WARRANTY
COPYRIGHT
Customer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

cecotec Pinkycare 700 Perfect Nails

cecotec Pinkycare 700 Perfect Nails

SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the product. Keep this instruction manual for future reference or new users.

All safety instructions must be closely followed when using the appliance.
This appliance can be used by children aged 8years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance should not be carried out by unsupervised children.
This device contains an irreplaceable battery.
WARNING: use only the power supply unit provided with the appliance, reference KH8-300025EUG.
Make sure that the mains voltage matches the voltage stated on the rating label of the appliance and that the wall outlet is grounded.
This appliance is designed for domestic use only and is not intended for bars, restaurants, farmhouses hotels models and offices do not use outdoor near a gas or electric hub flames, or inside ovens.
The power adapter must only be used in dry places.
Check that the output current, voltage, and polarity of the power adapter match the information on the connected device!
Turn off and plug the appliance from the main supply when not in use and before
cleaning it. Pull from the plug, not the cord, to disconnect it from the outlet. Allow it to cool down before assembling or disassembling parts.
Do not use accessories that have not been recommended by Cecotec. The use of accessories or utensils not recommended by Cecotec may cause fire, electrical shock, or injury.
Do not immerse the cord, plug, or any non-removable part of the appliance in water or any other liquid, nor expose the electrical connections to water. Make sure your hands are dry before handling the plug or switching on the appliance.
Check the power cord regularly for visible damage. If the cord is damaged, it must be Repaired by the official technical support services of character to avoid any type of danger.
Do not twist, bend, pull, or damage the power cord. Protect it from sharp edges and heat sources. Do not allow it to touch hot surfaces. Do not let the cord hang over the edge of the working surface or worktop.
Do not use the appliance ifits cord, plug, or housing is damaged, nor after it malfunctions or has been dropped or damaged in any way.
To ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene, etc.) away from their reach.
RISK of electric shock:
Do not use the device near water if the power adapter is connected, like bathtubs, sinks, or other water containers.
Keep the device dry.
Keep the power adapter dry.
The device is designed to be used at a very low voltage for safety. Connect it only to power supplies following the specifications on the rating label.
Do not replace any part. Do not modify the product. Risk of electric shock!
The device is especially designed for manicures and pedicures.
Do not use it on cracked skin or open wounds!
Do not use it on birthmarks.
Seek medical advice if you suffering from diabetes haemophilia or immunodeficiency.
Check the results frequently during use to avoid injuries, especially in people with diabetes, who are less sensitive to pain in hands and feet.
An excessive use may cause skin irritation. In this case, stop using the device until the redness disappears.
Do not apply too much pressure. Guide the device with smooth movements around the application points.
Use it carefully!
Pay attention to overheating, e.g., by filing foot calluses, especially in people who are not sensitive to heat.
Calluses can be easily removed with dry skin. Do not completely remove calluses to preserve the natural skin protection.
Water and skin lotions may impair the progress of the treatment. If necessary, wash your feet briefly and then dry them thoroughly.
NOTE: To prevent skin breakage, apply a moisturising lotion after using the device.

PARTS AND COMPONENTS

Fig. 1

Round ball drill bit (to remove dead skin, calluses on the sole and heel and for the treatment of nails)
Work light
Speed setting buttons +/-
Speed indicators
Off and rotating direction switch
Power adapter connector
Flat drill bit (to smooth feet hard nails)
Fine umbrella diamond drill bit (to file and take care of nails)
Bud drill bit (to remove ingrown nails)
Thick umbrella diamond drill bit (to file and take care of nails)
Fine grit drill bit (to smooth feet hard nails)
Polish drill bit (to lime nails edges and clean nails surface)
Power adapter
Travel case

NOTE:
The graphics in this manual are schematic representations and may not exactly match the product.
Parts And Components

BEFORE USE

This appliance is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent product damage when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
Make sure all parts and components are included and in good conditions. If any of them are missing or not in good condition, Please contact cecotec’s official technical support services immediately.

Box contents:

1 Bamba Pinky Care 700 Perfect Nails manicure and pedicure device
7 heads
Adapter
Transport pouch
Instruction manual

OPERATION

Make sure the device is turned off by placing the switch in the middle position.
Select the drill bit you want to use. Insert the drill bit by fitting the shaft into the slot in the body of the device and pushing on it until it clicks. Remove the drill bits by holding the device body with one hand and pulling the drill bit with the other.
Connect the power adapter to the device inlet and a well functioning power socket.
Turn on the device by placing the switch in the rotary direction you want. It features 5 speed options and 2 rotating options: clockwise and counterclockwise. Start with the lowest speed option and increase speed if necessary by pressing the + button. To decrease the speed, press the – button.
Gently press the drill bits over the area to be treated in a circular motion. Do not apply too much pressure and approach the drill bit carefully.
To avoid injuries, check the result frequently.
When finished turn off reverse by placing the switch in the middle position again.
Unplug from the power supply after every use and before cleaning or changing drill bits.

Tip:

Avoid pay treatments in water bath and lotions, as effect of the drill bits is affected.
Be careful when using drill bits directly on the skin, as they can remove its natural protection.
Check the results during every use.
After use itis recommended to use moisturizing creams on the treated areas.

CLEANING AND MAINTENANCE

Warning:
Unplug the device from the power adapter before cleaning it.

Clean the device body with a slightly dampened cloth and dry it thoroughly. Be careful water does not enter the device.
Clean the drill bits with a dampened cloth and dry them thoroughly.
Always clean the power adapter with a dry cloth.
Do not use detergents or abrasive cleaning agents to clean the device and accessories.
Do not immerse the device or the power supply in water or other liquids.

Storage

Clean the device described in this manual and let it dry before storing it.
We recommend keeping and using the original packaging if you are not going to use the device for long periods.
Store the appliance in a dry, well-ventilated, and safe place, out of reach of children.
You can store the device in the travel pouch.

TECHNICAL SPECIFICATIONS

Model: Bamba Pinky Care 700 Perfect Nails
Product reference: 04318
Adapter:
Input 100-240 V~, 50/60 Hz, 0.3 A Max
Output: 30 V DC, 250 mA
Appliance:
Input: 30 V DC, 250 mA, 7.5 W
Technical specifications may change without prior notification to improve product quality.
Made in China: Designed in Spain

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or cells must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the batteries/ accumulators and take them to a collection point designated by the local authorities.
Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help protecting the environment.

TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of
conformity that exists at the time of delivery of the product under
the terms, conditions, and deadlines established by the applicable
regulations.
It is recommended that repairs be carried out by qualified
personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact cecotec official Technical Support Service at +34 963 210 728.

COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

Information requirement for external power supplies

Information published| Value and precision| Unit| Notes
Manufacturer’s name or trade m ark , commercial registration number and address| Ningbo KAM HOI Electronic Appliance Co., Ltd.
Sanfengqiao, South-West Street,
Yuya o, Zhejiang 315408
P.R. China| —| —
Mode identifier| KH8- 30 0025EUG| —| —
Input voltage| 100-240| V| Specified by the manufacturer. Shall be a value or a range.
Input AC frequency| 50 / 60| Hz| Specified by the manufacturer. Shall be a value or a range.
Output voltage| 30.0| V| Nameplate output voltage. Shall indicate whether is AC or DC.
In cases where more than one physical output or more than one output voltage at load condition1aremeasured, the sets of available Output voltage – Output current – Output power shall be published.
Output current| 0.25| A| Nameplate output current.
In cases where more than one physical output or more than one out put voltage at load condition 1are measured, the sets of available
Output voltage – Output current – Output power shall be published.
Output power| 7.5| w| Name plate output power.
In cases where more than one physical output or more than one output voltage at load condition 1 are measured, the sets of available Output voltage – Output current – Output power shall be published.
Average active efficiency| 81.33 (for 115V, 60 Hz);80.66 (for 230 V, 50 Hz)| %| Declared by the manufacturer based on the value calculated as arithmetical mean of efficiency at load conditions1-4.
In cases where multiple average active efficiencies are declared for multiple out put voltages available at load condition 1, the value published shall be the average active efficiency declared for the lowest output voltage.
Efficiency at low load (10%)| —| %| Declared by the manufacturer based on the value calculated at load condition 5.
External power supplies with a nameplate output power of l 0 War less shall be exempted from this requirement.
In cases where m ul tip le average active efficiencies are declared for multiple output voltages available at load condition 1, the value published shall be the value declared for the Lowest output voltage.
No-load power consumption| 0.09 (for 115V, 60 Hz);
0.09 (for 230 V, 50 Hz)| w| Declared by the manufacturer base d on the value measured for load condition 6.