MERRYIOT Sensors and for Amazon Sidewalk Installation Guide
- June 16, 2024
- MerryIoT
Table of Contents
MERRYIOT Sensors and for Amazon Sidewalk
Safety Warning
Read this manual before attempting to install the device!
Failure to observe the recommendations included in this manual may be dangerous or cause a violation of the law. The manufacturer, Browan Communications Inc. will not be held responsible for any loss or damage resulting from not following the instructions of this user manual.
- The device must not be dismantled or modified in any way.
- The device is only intended for indoor use. Do not expose it to moisture.
- The device is not intended to be used as a reference sensor, and Browan Communications Inc. will not be held liable for any damage which may result from inaccurate readings.
- The battery should be removed from the device if it is not to be used for an extended period. Otherwise, the battery might leak and damage the equipment. Never leave a discharged battery in the battery compartment.
- The device must never be subjected to shocks or impacts.
- To clean the device, wipe with a soft moistened cloth. Use another soft, dry cloth to wipe dry. Do not use any detergent or alcohol to clean the device.
What is Amazon Sidewalk
Amazon Sidewalk – Connecting Wireless IoT Devices at Homes and Beyond
Amazon Sidewalk connects homes and communities together. It’s a shared network that helps devices connect to the Internet and work better. Many Ring and Echo devices can act as a Sidewalk Bridge via Bluetooth and the 900MHz spectrum to provide a secure connection for low-bandwidth devices in the home and around the neighbourhood. Customers with an Amazon Sidewalk Bridge contribute a small portion of their internet bandwidth, which is pooled together to create a neighbourhood network that benefits all Amazon Sidewalk-enabled devices in a community. This helps MerryIoT devices stay connected with Amazon Sidewalk coverage and no recurring fees for customers to access Sidewalk.
How MerryIoT and Amazon Sidewalk can benefit your daily life.
MerryIoT provides a complete solution for your home and asset monitoring that
helps increase a level of security and safety to your property and loved ones.
With the help of Amazon Sidewalk, all MerryIoT smart devices stay connected
and continue to work over longer distances. A nearby Amazon Sidewalk gateway
will pick up messages from the connected MerryIoT device and route them to the
MerryIoT application via an integrated AWS cloud with multiple layers of data
encryption for customer privacy protection. Today, Amazon Sidewalk include
many Echo devices and select Ring devices that securely connect Sidewalk-
enabled endpoints to the Amazon Sidewalk network and provide services to you
and your neighbors.
MerryloT Air Quality CO2 (CD10)
MerryloT Motion Detection (MS10)
MerryloT Open/Close (DW10)
MerryloT Leak Detection (WL10)
Input / Output
MerryloT Air Quality CO2 (CD10)
MerryloT Motion Detection (MS10)
MerryloT Open/Close (DW10)
MerryloT Leak Detection (WL10)
Sensor Introduction
MerryIoT Air Quality CO2 sensor (CD10) is a professional smart device that works with Amazon Sidewalk. Its minimalistic design makes it ideal for wall mounting, whether at home or in the workplace. This sensor offers comprehensive monitoring of CO2 levels, temperature, and humidity.
Features
- 3 sensors in 1 (CO2 & Temperature & Humidity)
- Built-in buzzer for alarm if the CO2 level is more than 1000 ppm
- Long-range coverage over Amazon Sidewalk’s 900MHz wireless network Coverage test button for easy installation
- Up to 2 years of battery lifetime
- Note: Battery life is mainly determined by the reporting frequency. Other factors include moisture and high temperature.
MerryIoT motion detector (MS10) is an easy step toward a safer home. It monitors front and back doors, driveways, sheds, garages, and gates, making it suitable for all your properties. This sensor also provides an additional level of security for your loved ones. Moreover, it promptly alerts you in case of emergencies.
Features
- 4 sensors in 1 (PIR & Temperature & Humidity & Vibration)
- Detect human presence accurately
- Long-range coverage over Amazon Sidewalk’s 900MHz wireless network
- Coverage test button for easy installation
- Alarm message for the device is been moved or tampered with
- Up to 3 years of battery lifetime
- Note: Battery life is mainly determined by the reporting frequency. Other factors include moisture and high temperature.
- Ultrawide range detection
- 125° Horizontal
- 100° Vertical
- Up to 7m distance
MerryIoT Open/Close sensor (DW10) gives you peace of mind, anywhere, anytime. Get real-time alerts at the exact moment you have unexpected guests, broken windows, opened safes, an opened mailbox or escaped pets.
Features
- 4 sensors in 1 (Open/Close & Temperature & Humidity & Vibration)
- Long-range coverage over Amazon Sidewalk’s 900MHz wireless network
- Coverage test button for easy installation
- Alarm message for the device is been moved or tampered with
- Up to 3 years of battery lifetime
- Note: Battery life is mainly determined by the reporting frequency. Other factors include moisture and high temperature.
MerryIoT Water Leak Sensor (WL10) will instantly notify you as soon as it detects water leakage. You can now say goodbye to concerns about leaks or flooding in your basement, under your sinks, around your water heater, or anywhere else in your home.
Features:
- 4 sensors in 1 (Drip/Leak/Flood & Temperature & Humidity & Vibration)
- Built-in water sensing probes on top and bottom for leak/flooding detection
- Long-range coverage over Amazon Sidewalk’s 900MHz wireless network
- Coverage test button for easy installation
- Alarm message for the device is been moved or tampered with
- Up to 3 years of battery lifetime
- Note: Battery life is mainly determined by the reporting frequency. Other factors include moisture and high temperature.
Sensor Installation
-
Please make sure you have Sidewalk coverage before installing the MerryIoT Sensors. To check the Sidewalk coverage in your neighbourhood, visit https://coverage.sidewalk.amazon and follow these steps:
-
Type your location on the top right corner.
-
According to the vicinity of your location, find your accurate location to see if any Sidewalk coverage around here.
-
Install and launch the MerryIoT mobile application on your phone.
-
Register your account.
Sign in by social media:
-
Add your device to the App.
-
When the sensor is successfully online, the LED will keep on for 3 seconds.
-
Press the button on the senser, the sensor’s real-time status will be updated.
-
Once the Sensor is successfully connected, the following icon will appear on the dashboard.
-
Once the Sensor is connected, install the Sensor to your desired location
MerryloT Air Quality CO2 (CD10)
It is important to note that the CO2 sensor unit should be mounted at 48 inches (122cm) above the floor and kept away from external doors or windows, which may make the space appear to have more fresh air than it actually does. Think of CO2 behaving like water it rises from the bottom, similar to how water fills a cup. This principle applies to indoor spaces such as draft coolers, restaurants, breweries, and grow facilities. Because CO2 gas is denser than regular air, it tends to flow down stairs or collect in low-lying areas first.
So, please avoid this placement:
- Restricted airflow
- In direct sunlight from windows
- Close to heat sources
MerryloT Motion Detection (MS10)
Assets where intruders are most likely to enter or for other applications related to occupied spaces include the following:
- Garage Entrance (for security purposes)
- The eye of the sensor should be oriented in the direction where intruders may approach.
- Meeting Room (for occupied space purposes)
- It is recommended to install 2 MerryIoT Motion Detections within a single space to determine its occupancy status. One sensor should be positioned with its sensor eye directed towards the entrance of the space, and the other one pointing at where people assumed to be staying in the space.
MerryloT Open/Close (DW10)
- Clean the installation area.
- Remove the protective layer from the double-sided tape on the door sensor, place the door sensor in the desiredposion (the fixed part of your door or window), and press firmly for at least 5 seconds.
- Remove the protective layer from the double-sided tape on the magnet, place the magnet in the desired postion (align the magnet marking with the hall sensor marking on the sensor), and press firmly for at least 5 seconds.
Note: the maximum sensing distance is 10mm.
MerryloT Leak Detection (WL10)
The most common application for our water detection sensors is placing them underneath AC units, which are prone to leaks. However, it is important to also address other possible risks, such as existing pipework, heating systems, kitchens, toilets and areas that might be likely to flood first during extreme weather conditions (by doors/windows). It is recommended to install multiple MerryIoT Leak Detection Sensors in one space, where the potential leakage may occur.
- For Home basement use.
- For server rooms and data centres.
APP Functions
MerryloT Air Quality CO2 (CD10)
Icons
MerryloT Motion Detection (MS10)
Icons
MerryloT Open/Close (DW10)
Icons
MerryloT Leak Detection (WL10)
Icons
**
**Battery Replacement
MerryloT Air Quality CO2 (CD10)
-
Tools: Cross-type screwdriver x1 (PH0).
-
Remove the battery cover of the sensor with a cross-type screwdriver (PH0 size).
-
Replace the battery with new ones (Li-SiO2 battery, “ER14505”, AA size x2 pcs). *Caution: Using batteries other than the ones provided may lead to performance loss, reduced battery life, and device damage.
Ensure proper disposal according to environmental regulations. Mixing of cells can result in battery leakage and suboptimal device performance. -
Re-assemble the battery cover.
MerryloT Motion Detection (MS10)
- Tools: Cross-type screwdriver x1 (PH0).
- Remove the battery cover of the sensor with a cross-type screwdriver (PH0 size).
- Replace the battery with new ones (Alkaline Battery, “LR6”, AA size x2 pcs). *Caution: Using batteries other than the ones provided may lead to performance loss, reduced battery life, and device damage. Ensure proper disposal according to environmental regulations. Mixing of cells can result in battery leakage and suboptimal device performance.
- Re-assemble the battery cover.
MerryloT Motion Detection (MS10)
- Tools: Cross-type screwdriver x1 (PH0).
- Remove the battery cover of the sensor with a cross-type screwdriver (PH0 size).
- Replace the battery with new ones (Li-SiO2 battery, “ER14250”, 1/2 AA size x2 pcs). *Caution: Using batteries other than the ones provided may lead to performance loss, reduced battery life, and device damage. Ensure proper disposal according to environmental regulations. Mixing of cells can result in battery leakage and suboptimal device performance.
- Re-assemble the battery cover.
MerryloT Leak Detection (WL10)
-
Tools: Cross-type screwdriver x1 (PH1), Star-type screwdriver x1 (T8H), Plastic disassembly stick (recommended).
-
Remove 4 rubber stands of the sensor with a disassembly stick.
-
Remove the bottom cover of the sensor with a star-type screwdriver (T8H size). *Caution: Removing the bottom cover may affect the water-tightness. Please get help from the Browan team before you do so.
-
Remove the circuit board of the sensor with a cross-type screwdriver x1 (PH1).
Caution: Avoid touching the circuit board with bare hands. Touching boards can release static discharge. Please wear a plastic/rubber glove .
-
Replace the battery with new ones (Alkaline Battery, “LR6”, AA x2 pcs).
- Caution: DO NOT remove the battery holder.
- Caution: Using batteries other than the ones provided may lead to performance loss, reduced battery life, and device damage. Ensure proper disposal according to environmental regulations. Mixing of cells can result in battery leakage and suboptimal device performance.
-
Re-assemble the battery cover.
- Why do I get the error message “Device was not founded” while binding the MerryIoT sensor through the MerryIoT Sidewalk sensor APP?
- Answer: Since the MerryIoT Sidewalk sensor APP is only for a sidewalk version of MerryIoT sensors, kindly check with your supplier whether the one you purchased is for use with the MerryIoT Sidewalk version.
- How long will it take to get the CO2 value?
- Answer: It takes at least 20 minutes to get the CO2 value by manual activation, or 1 hour automatically.
- Why do I have to “sign in” via Google/Apple ID twice?
- Answer: The first “sign in” is identified as a pre-sign-up process in AWS Cognito which the MerryIoT Sensor uses to manage third-party social media registration. Once the pre sign-up is complete, the mobile App page will redirect you to the “sign in” page again, then, you can sign in to the mobile APP successfully.
- 4. Why do the APP malfunction when I log in or switch accounts?
- Answer: If the APP displays abnormality after logging in for the first time or switching accounts, please fully close the APP and then reopen it.
Copyright
© 2022 BROWAN COMMUNICATIONS INC. This document is copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of BROWAN COMMUNICATIONS INC.
Notice
BROWN COMMUNICATIONS INC. reserves the right to change specifications without prior notice. While this manual has been compiled with great care, it may not be deemed as an assurance of product characteristics. BROWN COMMUNICATIONS INC. shall be liable only to the degree specified in the terms of sale and delivery. The reproduction and distribution of the documentation and software supplied with this product and the use of its contents are subject to written authorization from BROWAN COMMUNICATIONS INC.
Trademark
The products described in this document are licensed products of BROWAN COMMUNICATIONS INC.
Contact Us
- Website: https://www.merryiot.com
- E-mail: sales@merryiot.com
- support@merryiot.com
- Address: Brown Communications Incorporation
No.15-1 Zhonghua Rd., Hsinchu Industrial Park, Hukou, Hsinchu, Taiwan, 30352
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>