bol com Mode 2 Level2 EV Charger Instructions
- June 16, 2024
- bol com
Table of Contents
Mode 2 (Level2) EV Charger
(EV Supply Equipment)
Mode 2 Level2 EV Charger
Danger:
Risk of electrical shock or burn.
The device contains on user serviceable parts.
Please do not leave unit the control box is in charging status
Warning:
Use only with a RCD Protected supply.
Do not use if the EVSE, plug or cable is damaged.
Use only for charging compatible electric vehicles.
Monitor EVSE until LED status is “Charging”.
Instructions for Use:
Connect power plug to power receptacle.
Check display and LED power light.
Touch the blue key to set output current before connecting EV
Touch the green key to set delay-time before connecting EV
Connect IEC 62196-2/SAE J1772 plug to your Electric Vehicale.
Check Display and LED charging light.
Status LED Meaning:
| LED State | Fault Yellow | State Green | Charge Red |
|---|---|---|---|
| Ready | Off | On | Off |
| EV Connected | Off | Slow Flash | Off |
| CP Error | Off | Fast Flash | Off |
| Charging | Off | Putsing | On |
| Charge Complete | Off | Flash | Off |
| Fault | Flash | Off | Off |
Specifications
Input: 110V ∼ 250/380V AC 50Hz/60Hz
Output: 110 V ∼ 250V/380V AC 0Hz/60Hz
Operating Temperature: -30ºC to + 50ºC
IP Class for EVSE enclocure: IP 55
Meets standards:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>