MOTOROLA SOLUTIONS PMPN4640 Apx Next Vehicle Charger User Guide
- June 16, 2024
- Motorola Solutions
Table of Contents
MOTOROLA SOLUTIONS PMPN4640 Apx Next Vehicle Charger User Guide
The related manuals are available at https://learning.motoro-lasolutions.com through publication part numbers:
- MN009407A01 (Online User Guide)
- MN009444A01 (Installation Guide)
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or
registered trademarks of Motorola Trademark Holdings, LLC and are used under
license. All other trademarks are the property of their respective owners.
© 2023 Motorola Solutions, Inc. All rights reserved.
Printed in
Charging Secured Radio in Vehicle Charger
Charging Secured Battery with Adapter in Vehicle Charger
LED Indicators
Table 1: Battery Charging Indicators
Safety and General Information
All batteries can cause property damage and/or bodily injury such as burns if
a conductive material such as jewelry, keys or beaded chains touches exposed
terminals.
The material may complete an electrical circuit (short circuit) and become
quite hot.
Exercise care in handling any charged battery, particularly when placing it
inside a pocket, purse or other container with metal objects.
Do not replace or charge batteries in potentially explosive atmosphere.
Contact sparking may occur while installing or removing batteries and cause an
explosion.
Due to the risk of electrical shock or other physical injury, never insert
your hands into the charger pocket.
Product Safety and RF Exposure Compliance
Before using this product, read the Product Safety and RF Exposure booklet enclosed with your radio which contains important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable Standards and Regulations.
Operational Warnings
Vehicles With an Air Bag
Do not place a portable radio or install radio communications equipment in the
area over an air bag or in the air bag deployment area. Air bags inflate with
great force. If a portable radio is placed in the air bag deployment area and
the air bag inflates, the radio may be propelled with great force and cause
serious injury to occupants of the vehicle.
- Installation of vehicle communication equipment should be performed by a professional installer/technician qualified in the requirements for such installations. An airbag’s size, shape, and deployment area can vary by vehicle make, model, and front compartment configuration such as bench seat as opposed to bucket seats.
Contact the vehicle manufacturer’s corporate headquarters, if necessary, for specific airbag information for the vehicle make, model, and front compartment configuration involved in your communication equipment installation.
Blasting Caps and Areas
To avoid possible interference with blasting operations, turn your radio off and remove it from the charger when you are near electrical blasting caps, in a blasting area, or in areas posted “Turn off two-way radio.” Obey all signs and instructions.
Operational Cautions
Efficient System Operation
- All equipment must be properly grounded according to Motorola Solutions installation instructions for safe operation.
All equipment should be serviced only by an authorized technician.
Notes
Documents / Resources
|
MOTOROLA SOLUTIONS PMPN4640 Apx Next Vehicle
Charger
[pdf] User Guide
PMPN4640 Apx Next Vehicle Charger, PMPN4640, Apx Next Vehicle Charger, Next
Vehicle Charger, Vehicle Charger, Charger
---|---