SOUNDPEATS 018-230030 RunFree Lite Open Ear Headphones User Guide

**SOUNDPEATS 018-230030 RunFree Lite Open Ear Headphones User Guide

**

Pairing

1. Long Press the power button for 3 seconds to turn on the headset. Aer the white light is on once, the headset enters the pairing mode, and the red and white lights ash alternately.
2. Turn on the bluetooth of your device, then select“SOUNDPEATS RunFree Lite” from the bluetooth list to complete the pairing.

Reset

1.  Please insert the charging cable into the charging port to make the headset enter the charging status.
2.  Long press the power button for 3 seconds, the red and white lights will ash alternately twice, a total of 4 seconds to restore factory settings.
3. Unplug the charging cable and turn it on, the headset reset is complete.

Wearing

1.  Identify the le and right earphones and wear .
2.  Rotate the headset and nd the most comfortable position.

Product Diagram

Control

Q1: How to charge the headset?

1. Connect with a Type-C charging adapter to charge .(Charging current is not greater than 1A). 2. When not using for a long time, please charge it once every three months at least

Q2: How does the headset disconnect from the phone?

Q3: How can the headset connect to two devices at the same time?

Step 1. Turn on the headset, and connect device A to the headset. Step 2. Disconnect device A , and the headset enters pairing mode. Step 3. Connect device B to the headset. Step 4. Manually connect device A to the headset again. Aer manually connecting two dev

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2.  this device must accept any interference received, including interference that may cause undesired operation.
   Changes or modifcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC ID

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference thatmay cause undesired operation of
the device.
RF warning statement:
The device has been evaluated to meet genera

MANUFACTURER
Shenzhen SoundSOUL Information Technology
Company Limited

Room 1308-1309, Building B, Huihai Square,
Chuangye Road, Longhua District, Shenzhen,
China. 518109
support@soundpeats.com
www.soundpeats.com

Company：Qing UG(haftungsbeschränkt)
Address：Undinestr. 7, 12203 Berlin Germany

TANMET INT’L BUSINESS LTD

9 Pantygraigwen Road, Pontypridd, Mid Glamorgan, CF37 2RR,UK
tanmetbiz@outlook.com

References

• SOUNDPEATS Wireless Earbuds, Bluetooth Headphones, Speakers for Sound.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>