UniGuard GT07L 4G GPS Vehicle Tracker User Manual
- June 16, 2024
- UniGuard
Table of Contents
UniGuard GT07L 4G GPS Vehicle Tracker
UniGuard 4G GPS Vehicle Tracker
Specifications
- Dimensions: 905221mm
- Network Frequency(4G+2G): LTE-FDD B1/B2/B3/B4/B5/B7/B8/B28/B66 (depends on version), GSM :850/900/1800/1900Mhz
- Module & Chipset: SIMCom LTE Cat 1 Module A7670 Series+AT6558R
- GPS channel: 66
- Tracking sensitivity: -165dBm
- Location accuracy: N/A
- Time To First Fix(open sky): N/A
- Working voltage: N/A
- GPRS Protocol: N/A
- Operating temp.: N/A
- Back up battery: N/A
- Standby & Working consumption: N/A
- GSM / GPS antenna: N/A
- G-Sensor: N/A
- Memory storage: N/A
- Ignition status detection: N/A
- Micro USB interface: N/A
- Configuration Mode: N/A
- OTA Power interface: N/A
Product Usage Instructions
Step 1: Installation
To install the UniGuard GPS Tracker, follow these steps:
- Find a suitable location in your vehicle to place the tracker.
- Ensure that the tracker is securely mounted and will not move during vehicle operation.
- Connect the tracker to the vehicle’s power supply using the provided power interface.
- Insert a SIM card into the tracker’s SIM card slot.
- Connect the tracker to an external GPS antenna (if required).
Step 2: Activation
Before using the UniGuard GPS Tracker, you need to activate it. Follow
these steps:
- Contact UniGuard Technology Limited to obtain the necessary activation information.
- Once you have the activation information, power on the tracker by connecting it to the vehicle’s power supply.
- Wait for the tracker to establish a network connection.
- Enter the activation information into the tracker using the provided configuration mode.
Step 3: Tracking
After activating the UniGuard GPS Tracker, you can start tracking your
vehicle. Follow these steps:
- Make sure the tracker is powered on and connected to the network.
- Access the UniGuard GPS tracking platform through the provided website or mobile app.
- Log in using your account credentials.
- Select the vehicle you want to track from the list of available vehicles.
- View real-time location updates and other tracking information on the platform.
FAQ
Q: How do I contact UniGuard Technology Limited for support?
A: You can contact UniGuard Technology Limited by visiting their website
www.uniguardgps.com and finding their contact
information.
4G GPS Vehicle Tracker
User Manual
V1.1
Thanks for your purchase of UniGuard GPS Tracker. Please read the manual carefully. Any questions, free to contact us.
Specifications
| Content | Specs. |
|---|---|
| Dim. | 905221mm |
| Network | LTE/GSM/GPRS |
| Frequency(4G+2G) |
- LTE-FDD B1/B2/B3/B4/B5/B7/B8/B28/B66
- (depends on version)
- GSM :850/900/1800/1900Mhz
Module & Chipset| SIMCom LTE Cat 1 Module
A7670 Series+AT6558R
GPS channel| 66
Tracking sensitivity| -165dBm
Location accuracy| <5 meters CEP
Time To First Fix(open sky)| Cold status <35s.| Hot status| <1s
Working voltage| 9-90VDC
GPRS Protocol| Class12, TCP/IP
Operating temp.| -20°C to +70°C
Back up battery| 80mAh /3.7V Li-Polymer battery
Standby
consumption
| &| Working| 5mA~50mA
GSM / GPS antenna| Built-in
G-Sensor| Support
Memory storage| 2000 data
Ignition status detection| Support
Micro USB interface| Flash firmware/Configuration
Configuration Mode| PC – USB/GPRS /SMS
OTA| Support
Power interface| 3PIN version
- SIM Card Installation1 Prepare SIM card with GPRS data, SMS and Call enabled for testing purpose.
- Pull the cover and Insert SIM card
- Put device at open place, out of house.
Signal Light
| LED Type | LED Status |
|---|---|
| GSM Light (Yellow) | OFF: GSM module abnormal or Sleep |
ON: Device GPRS Online
Flashing: Searching Signal
GPS Light (Blue)
| OFF: GPS module abnormal or Sleep
ON: Device GPS Located
Blink every 1 sec: Device not located
Blink every 2 sec: WIFI signal
SMS Commands
| Functions | SMS Command Format | Command Reply |
|---|---|---|
| Check Setup | CXZT | ID, IP, Port, GPS, GSM, etc. |
| Set IP and Port | IP www.gpspos.net 6006 | IP OK |
| Set APN | NAPN=cmnet,, | APN SET OK |
| Restart | CQ | CQ OK |
| Overspeed | SZCS#speed=80 | SetOK:speed=80 |
| GPRS interval | SZCS#FREQ=30 | SETOK:FREQ=30 |
Installation Attentions
Metal shall shield or weaken GPS signal. Avoid metal areas while doing installation.
Wiring Diagram
Web Platform GPS Tracking Software
website: www.gpspos.net
APP: GPSPOS
Search and Download from Google Play and Appstore Default login ID is device
serial number, default password is 123456
Guarantee Card
Name| | Phone|
---|---|---|---
Purchase Date| | IMEI|
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>