HEPRO GRIPO Support Pole Arkiver User Manual

HEPRO GRIPO Support Pole Arkiver

Explanation of symbols

Content

POLE

TOP PLATE / BASE PLATE GAS SPRING

Instructions before use

BUILT AND PRODUCED IN ACCORDANCE WITH:

• WITH: MDR 2017/745
• Relevant parts of EN 12182:2012

SPECIALLY ADAPTED INFORMATION
For information adapted for users with visual impairments, reading or writing difficulties and cognitive impairments; please contact your sales representative or therapist.

ENVIRONMENT OF USE
This product is intended for indoor use in private homes or institutions. The Gripo pole must be at room temperature before instalment.

USER WEIGHT
Maximum user weight is 210 kg

MAINTENANCE
It is recommended that the pole is disassembled twice a year for the gas spring to maintain its functionality.

CLEANING
All parts can be cleaned with domestic cleaning products, at a maximum of 60 °C. Avoid strong solvents.

DIMENSIONS

TRANSPORTATION
During transportation, the product must be secured so that it cannot cause damage to passengers or other objects.

PLACEMENT OF SERIAL NUMBER
the bottom ot the product’s outer aluminium tube.

INTENDED USE
Intended use for persons in need of assistance or support for the performance of everyday movements.

RECYCLING

All parts must be recycled in accordance with local regulations; please contact your local recycling plant

Safety

• Do not use the product if the read safety ring at the top of the pole is visible.

• Always consider pinch hazard between the pole and other furniture / objects.
  Please keep in mind the distance between the pole and other furniture, and assess distance so that the user can not be pinched between the pole and the furniture.

• Do not assemble the product on loose objects that are not fixed to ceiling or floor, such as rugs, plates etc.

• Do not let children play with the product.

• Do not place on surfaces that are not plane and parallel.

• For installation in wet zones, use anti slip underlays.

• Do not modify or in any other way alter the product in a manner not described in this User Manual.

• Do not use this product with any additional equipment not described in this User Manual.

• Do not submerge the product in water or other liquids.

• Do not wash the product in water or other liquids.

• Do not wash the product with dishwasher products, bleach or acetone.

• Take care when opening the package, so that neither you nor the product is harmed.

GRIPO CONSISTS OF:

• 1 x Base plate (the smallest)
• 1 x Top plate (den largest)
• 1 x Pole
• 1 x Gas spring
• 1 x User Manual

VARIATIONS

longer outer tube and is suitable for those who need the accessories attached higher up on the pole.

Before assembling

Art. nr. 35200 Art. nr. 35210 Art. nr. 35202

INSTALLING GRIPO AGAINST A CEILING
Before Gripo is installed, the type of ceiling in question must be determined and make sure that the ceiling is solid and can withstand a point load of 100 kg. If the ceiling is made from gypsum, it is important that Gripo is assembled as shown in the illustration. Avoid placing Gripo between ceiling beams if the ceiling is made from chipboard as well. For ceilings made of gypsum or other weak ceiling constructions we recommend using accessories 35153 – Large ceiling plate to ensure extra reinforcement between the top plate and the ceiling.

Assembling

1. Place the pole on the small base plate.
   Place the gas spring at the top of the inner tube and push the gas spring towards the red safety mark.
   Place the large top plate on top of the gas spring
   The force in effect against the ceiling is 100 kg

2. Place the pole in a suitable place.
   Pull out the foot pedal.
   Open the quick release.

3. Slide the inner tube up until the top plate reaches the ceiling, while the bottom plate remains in contact with the floor.
   Make sure the pole is vertical.

4. Rotate the inner tube clockwise so that the inner tube is locked in place with the outer tube.

5. Lock the quick release.

6. Press down the foot pedal.
   If there is any concerns wether the ceiling can withstand the pressure from the gas spring, thoroughly watch the ceiling construction while carefully pressing down the foot pedal.
   Make sure that the red safety mark is gone.
   If the red safety mark is still visible, disassemble the pole and start over from point 2.

Make sure that the red safety mark is not visible during use.
If it appears – disassemble the pole and reassemble it.
Make sure that the screw on the quick release is tight and that the inner tube is locked to the outer tube. If the red safety mark is still visible it can be caused by the ceiling construction not being strong enough

Disassembling

Open the quick release and pull out the foot pedal. If necessary, rotate the inner tube anticlockwise.

HEPRO AS | Øvremoan 9, 8250 Rognan – Norge
Tlf. 46 74 55 55 | firmapost@hepro.no | hepro.no

References

• Forside | HEPRO AS | Aktiv og trygg i alle livets faser

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>