CREALITY 3401010705_PJ-SM-000 Nebula Smart Kit Instruction Manual

CREALITY 3401010705_PJ-SM-000 Nebula Smart Kit

Product Information

Specifications

• Product name: Creality Nebula Pad
• Product model: N-Pad 01
• Main control chip: dual-core 1.2GHz
• Storage memory: 8G
• Screen type: IPS
• Screen size: 4.3inch
• Screen resolution: 272*480
• Touch mode: resistive touch
• WiFi protocol: 802.11b/g/n
• USB interface: USB2.0
• Rated voltage: 5V
• Vibration sensor: Yes
• Resume printing: support
• Filament run-out detection: support
• Supported languages: 10 languages (Chinese, English, Japanese, German, French, Italian, Spanish, Portuguese, Russian, Turkish)
• Product size: 133.1783.319.6mm
• Net weight: 145g

Packing List

1. Nebula Pad x1
2. Nebula Camera x1
3. U disk x1
4. Tripod x1
5. G-Sensor cable x1
6. G-Sensor x1
7. Cross pan head self-tapping screw M3*8 x2
8. Hexagon socket head screw M3*6 x2
9. Hexagon socket head screw M3*8 x2
10. Hexagon socket head screw M5*10 x3
11. M5 T-nut x3
12. Cable tie x5

Product Usage Instructions

Firmware Upgrade

OTA Online Upgrade
To receive the latest firmware updates online:

1. Connect the Nebula pad to Wi-Fi.
2. Check for firmware updates through the Wi-Fi connection.
3. If an update is available, follow the on-screen instructions to install it.

USB Offline Upgrade
To perform the firmware upgrade using a USB flash disk:

1. Visit the official website and navigate to the download section.
2. Download the latest firmware for the Nebula pad.
3. Copy the firmware file to a USB flash disk.
4. Connect the USB flash disk to the Nebula pad’s USB interface.
5. Follow the on-screen instructions to perform the upgrade.

Installation Steps (Example: Ender-3 V2 Neo)

Nebula Pad Installation

1. Obtain and print the bracket stl model from the U disk or the official website download center.
2. Place the screen bracket on the side of the profile on the right and tighten it with 3 M5X10 screws and T-nuts.
3. Align the Nebula pad with the bracket and slide it down to securely attach it.

FAQ

• Q: How can I download the latest firmware for the Nebula Pad?
  A: You can download the latest firmware from the official website at [https://www.creality.com/pages/download].

• Q: What languages are supported by the Nebula Pad?
  A: The Nebula Pad supports 10 languages, including Chinese, English, Japanese, German, French, Italian, Spanish, Portuguese, Russian, and Turkish.

FCC Caution

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20-cm between the radiator& your body

Precautions for use

1. Please use the product strictly by this manual to avoid personal injury and property damage.
2. Do not place the machine near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, low-dust environment.
3. Please use the power adapter that comes with the machine to prevent damage to the machine.
4. Do not place this product in a vibration or unstable environment.
5. Please power off to clean the product regularly.
6. Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Creality will not be responsible for any violators’ legal liability under any circumstance.

Firmware upgrade

1. OTA Online Upgrade: Connect to Wi-Fi to receive the latest firmware updates online;
2. USB Offline Upgrade: Visit the official website to download the latest firmware and perform the upgrade via a USB flash disk.
   Download Path: [https://www.creality.com/pages/download Ecosystem Creality Nebula Smart Kit

Product Description

*10 languages
(Chinese, English, Japanese, German, French, Italian, Spanish, Portuguese, Russian, Turkish)

Packing list

1. Nebula Pad x1
2. Nebula Camera x1
3. U disk x1
4. Tripod x1
5. G-Sensor cable x1
6. G-Sensor x1
7. *Cross pan head self-tapping screw M38** x2
8. *Hexagon socket head screw M36** x2
9. *Hexagon socket head screw M38** x2
10. *Hexagon socket head screw M510** x3
11. M5 T-nut x3
12. Cable tie x5

Product view and interface description

G-Sensor cable
Nebula Pad Independent Power Connector (5V): When the Nebu la p ad l acks power supply while connected to peripherals like cameras, it requires a separate power supply.

Installation steps

(take Ender-3 V2 Neo as an example)

Model download path: https://www.creality.com/pages/download Ecosystem Creality Nebula Smart Kit

Nebula pad installation

1. Obtain and print the bracket stl model in the U disk or the official website download center;
2. Place the screen bracket on the side of the profile on the right, and tighten it with 3 M5X10 screws and T-nuts;
3. Align the Nebula pad with the bracket and slide down to lock it tightly
4. Connect the display cable.

G-Sensor and Nebula Camera Installation

Boot guide and device interface introduction

Boot guide

Notice: The current UI is for reference only. As the firmware is constantly being upgraded, please refer to the latest firmware UI on the official website.

Printer self-test

Warm reminder: If there is an abnormality during the self-inspection, you can first refer to the FAQ to find the cause of the fault; or scan the QR code to report the fault, and then solve the fault through after-sales service
Notice: The current UI is for reference only. As the firmware is constantly being upgraded, please refer to the latest firmware UI on the official website.

Device interface introduction

Notice: The current UI is for reference only. As the firmware is constantly being upgraded, please refer to the latest firmware UI on the official website.

Function settings such as axis movement/temperature/feed and retreat, model fan cooling, etc. can be set through the preparation interface.

Local and USB drive model files can be managed on the print file preview interface

Function settings such as Nebula pad system, network, and camera can be set through the Setting.

Remote control

Device interface in Creality Print slicing software
**Notice** The current UI is for reference only. As the firmware is constantly being upgraded, please refer to the latest firmware UI on the official website.

Creality Cloud APP control
After binding the Creality cloud account on the Creality Nebula Pad, you can remotely control it through the app.

Join the Facebook Community
https://www.facebook.com/groups/sonicpad
+86 755 3396 5666
cs@creality.com

SHENZHEN CREALITY 3D TECHNOLOGY CO…, LTD.
Official Website: www.creality.com
Business Tel: +86 755-8523 4565
E-mail: cs@creality.com
Company Address: 18th Floor, JinXiuHongDu Building, Meilong Road, Xinniu
Community, Minzhi Street, Longhua District, Shenzhen City, China.

References

• 3D Printer Slicer Software& Firmware Download - Creality 3D

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>