CP PLUS CP-AD-H2B-W Dash Camera User Guide Product Information
- January 10, 2024
- CP PLUS
Table of Contents
- CP-AD-H2B-W Dash Camera
- Product Information
- Specifications
- Product Usage Instructions
- Product Installation
- Power On/Off
- Download App
- Q: Are the illustrations in the manual accurate?
- Q: How do I install the electrostatic stickers?
- Q: How do I power on/off the dashcam?
- Q: What happens if the dashcam gets too hot or if I remove the
- Q: How do I download the CarKam APP?
- Q: How do I connect my mobile phone to the CarKam?
CP-AD-H2B-W Dash Camera
Product Information
Specifications
-
Model: CP-AD-H2B-W
-
Power: Supports vehicle cigarette lighter power or parking
monitoring mode -
Storage: SD card (contact side facing up)
-
Connectivity: Micro USB charge connector
-
Features: Power button, mic hole, light, camera lens, bracket
adhesive
Product Usage Instructions
Product Installation
-
Install electrostatic stickers:
-
Choose a clean area on the windshield for installation.
-
Clean the glass before installation.
-
Peel off the protective tape on the high-temperature adhesive
of the bracket. -
Place the recorder into the dotted frame of the electrostatic
sticker. -
Squeeze out any bubbles between the sticker and the glass.
-
-
Insert the SD card:
-
Insert the SD card into the connector with the contact side
facing up. -
Ensure it is installed properly until a (click) sound is
heard.
-
-
Fix the recorder:
-
Peel off the protective tape on the high-temperature adhesive
of the bracket. -
Put the recorder into the dotted frame of the electrostatic
sticker.
-
-
Cable and connect the power supply:
-
Arrange the power supply line along the top of the windshield,
A-pillar, and passenger storage box. -
Connect the charging head near the cigarette lighter.
-
Insert the cigarette lighter.
-
Note: Hide the power line under the roof upholstery and seal
the rubber ring along the A-pillar using a pry tool (if
necessary).
-
Power On/Off
-
Power On:
-
Connect the vehicle cigarette lighter and start the vehicle.
The recorder will power on automatically. -
In parking monitoring mode, the dashcam will power on
automatically if it detects a vehicle collision or movement.
-
-
Power Off:
-
Press and hold the power button for 3 seconds to shut down the
dashcam. -
If the vehicle turns off and stops supplying power to the
cigarette lighter, the dashcam will automatically turn off. -
The dashcam will also automatically shut down in the following
conditions: -
Operating in an environment that exceeds the operating
temperature. -
Removing the SD card during dashcam operation.
-
Download App
-
Step 1 – Download App:
- Scan the QR code to download and install the CarKam APP.
-
Step 2 – Add device:
-
Open the WiFi settings of your mobile phone.
-
Find the WiFi hotspot of this device and click Connect.
-
Enter the WiFi password (check the backside of the
CarKam). -
If the WiFi connection is successful, open the CarKam APP.
-
The APP will display the current recorder recording screen
after connecting to the WiFi of this device. -
Note: If the APP does not display the current recorder
recording screen, please reconnect the WiFi hotspot of this
device.
FAQ
Q: Are the illustrations in the manual accurate?
The illustrations in the manual are schematic diagrams and may
slightly differ from the real product due to upgrades. Please refer
to the actual product for accurate information.
Q: How do I install the electrostatic stickers?
To install the electrostatic stickers, choose a clean area on
the windshield, peel off the protective tape on the adhesive of the
bracket, and place the recorder into the dotted frame of the
electrostatic sticker. Make sure to squeeze out any bubbles during
installation.
Q: How do I power on/off the dashcam?
To power on the dashcam, connect it to the vehicle cigarette
lighter or enable parking monitoring mode. To power off, press and
hold the power button for 3 seconds or turn off the vehicle, which
stops supplying power to the cigarette lighter and automatically
turns off the dashcam.
Q: What happens if the dashcam gets too hot or if I remove the
SD card during operation?
If the dashcam operates in an environment that exceeds the
operating temperature or if you remove the SD card during
operation, it will automatically shut down.
Q: How do I download the CarKam APP?
To download the CarKam APP, scan the QR code provided in the
manual and follow the instructions to install it on your mobile
phone.
Q: How do I connect my mobile phone to the CarKam?
To connect your mobile phone to the CarKam, open the WiFi
settings on your phone, find the WiFi hotspot of the CarKam device,
enter the WiFi password (located on the backside of the CarKam),
and ensure a successful connection. Then, open the CarKam APP to
access the recorder recording screen.
CarKam Quick Start Guide CP-AD-H2B-W
instruction manual
Please read this manual carefully before using the product and keep it
properly.
Product Appearance
Tips: The illustrations of products, accessories and user interface in the manual are schematic diagrams, for reference only. Due to product upgrades, the real product and the schematic diagram may be slightly different, please refer to the
real product. 1. Power 2. Mic hole 3. SD card connector 4. Micro USB charge
connector 5. Light 6. Camera lens 7. Bracket adhesive
Product installation
1. Install electrostatic stickers. Install the electrostatic sticker on the
windshield in the dotted area. Avoid the edge of the glass and select a clean
area on the glass for installation. Please clean the glass before installation
and squeeze the bubbles between the electrostatic sticker and the glass during
installation.
2. Insert the SD card into the connector with the contact side facing up, the SD
card is installed until a (click) sound is heard.
3. Fix the recorder
Peel off the protective tape on the high-temperature adhesive on the base of
the bracket and put the recorder into the dotted frame of the electrostatic
sticker.
4. Cable and connect the power supply
As shown in the figure, the power supply line is arranged along the top of the
windshield, the A-pillar, and the passenger storage box, and after connecting
the charging head near the cigarette lighter, insert the cigarette lighter.
Note: Please use a pry toll to hide the power line under the roof upholstery
and seal the rubber ring along the A-pillar. Depending on the vehicle style,
the location of the cigarette lighter may also be different, the above figure
is for reference only.
Power On/Off
1. Power On The dashcam supports below power on methods:
–Connecting the vehicle cigarette lighter and then starting the vehicle, the
cigarette lighter get power from the vehicle and so the recorder power on
automatically. –In the parking monitoring mode, the dashcam will power on
automatically if dashcam detects the vehicle collision or movement.
2. Power Off
The dashcam supports below power off methods:
–Press and hold the power button for 3 seconds to shut down. –The vehicle
turns off and stops supplying power to the cigarette lighter, the dashcam will
automatically turn off.
During the operation of the recorder, it will automatically shut down when the
following conditions happen:
–Operating in an environment that exceeds the operating temperature, the
dashcam will automatically shut down. — Remove the SD card during the
operation of the dashcam, and the dashcam will automatically shut down.
Download App
Step 1 Download App Scan the QR code to download and install the CarKam APP;
Step 2 Add device 1. Open the WiFi settings of the mobile phone, find the WiFi
hotspot of this device, click Connect, and enter the WiFi password: Please
check backside of the carkam, and the WiFi connection is successful. 2. Open
the CarKam APP, the APP will display the current recorder recording screen
after connecting to the WIFI of this device. (Please note: If the APP does not
display the current recorder recording screen, please reconnect the WiFi
hotspot of this device)
Dashcam Wi-Fi hotspot information Hotspot nameCPPLUS-MAC address for example
CPPLUS-705B (Please check backside of ) CarKam Password: Refer to as model
name please check back side of the Dashcam.
Video/photo storage
1. SD card manual The dashcam must be equipped with a SD card to use, Package
not include SD card. Dashcam support SD card range: 16GB-256GB TF card (Class
10 or more) The default file partition format of the SD card may not be
consistent with the format supported by dashcam. Insert the SD card for the
first time and format it in the dashcam before starting to use. All the
contents will delete after formatting the SD card, please back up important
information to another device before formatting. The SD card may be damaged or
aged after multiple inserts and unplugs which causing Video or photo cannot
save normally, in this case, please replace the SD card with a new one in
time. Please use a reliable SD card from a regular manufacturer. Inferior SD
cards may have problems such as the nominal read and write speed does not
match the real and the nominal capacity does not match the real one. The
Company shall not be liable for Video/photo loss or damage due to using
inferior SD cards. In order to avoid slow reading and writing of the SD card
after a long period of use, it is recommended to format it in the dashcam
every two weeks or so. Do not plug and unplug the SD card while the dashcam is
powered on.
2. Video storage instructions
The storage of normal videos, emergency videos, and parking videos is overlay
method. When the SD card memory runs out, the new video will overlay the
oldest one. To ensure that important videos are not overlaid, please export
important videos to other devices such as mobile phones or computers in time
for backup.
3. Photo storage instructions
The number of photos stored is fixed at 200pcs, and after the storage space
runs
out, please manually delete the photos which you don’t need, otherwise the dashcam will not be able to continue taking photos.
Video recording
1. File storage
File type
File name
Normal video
Normal
Emergency video Event
Parking video
Normal
Snapshot
Photo
File naming rules
NOYYYYMMDD-HHMMSS-XXXXXX.mp4 EVYYYYMMDD-HHMMSS-XXXXXX.mp4 PAYYYYMMDD-HHMMSS-
XXXXXX.mp4 PHYYYYMMDD-HHMMSS-XXXXXX.jpg
2. Normal video recording
The dashcam automatically enter normal recording mode after power on. The
light is green during normal recording (default Wi-Fi on). The default
recording duration of normal video is 1 minute (the recording duration can be
modified in the settings) In the following cases, the dashcam is not in
recording mode, and the light status: red (default WIFI is on) SD card
abnormality. Format SD card process. Recorder factory reset process. Playback
mode (View recorder album on APP) Receive the upgrade package process When
returning to the main interface of the recorder, or exiting the above process,
the recorder will automatically turn on to record video.
3. Emergency video
Light status: Green Recording duration: On the basis of the currently recorded
video, continue recording for 30 seconds from the emergency video recording is
triggered. Note: Due to the complexity of road conditions while driving, the
dashcam does not ensure that video will be stored in the emergency video file
every time after emergency occurs. If you can’t find the video in the
emergency video file, check in the normal video file.
Emergency video recording will stop in the following situations: In the
process of recording emergency video, press and hold the power button to shut
down, the dashcam exit the emergency video recording, and save the emergency
video that has been recorded, and then shut down; In the process of recording
emergency video, disconnect the external power supply and shut down; The
dashcam shutdown caused by continues to run at high temperature, the dashcam
will exit the emergency video recording, and save the emergency video that has
been recorded at the end, and then shut down; During the recording of
emergency video, ACC OFF shuts down; If the SD card is removed and turned off,
exit the emergency video recording and shut down directly.
Notes:
1. The dashcam is a driving assistance product for the purpose of recording
the external status of the vehicle, it cannot protect the user’s driving
safety by using dashcam, During the user using dashcam, due to product
failure, information loss, the operation of dashcam caused by driving
accidents and any losses which has nothing to do with the company. 2. Due to
differences in vehicle conditions, driving styles, driving environments, etc.,
some functions of dashcam may not work normally. Power failure, use in an
environment exceeding normal temperature and humidity, collision, SD card
damage, etc., may cause the recording to be failed, and the dashcam does not
guarantee that all videos can be completely saved under any circumstances. The
driving video recorded by dashcam is for reference only. 3. Please install
this product correctly, do not block the driver’s line of sight, do not block
the airbag, otherwise it is easy to cause product failure and personal injury.
4. The dashcam must be equipped with a SD card to use, Package not include SD
card. 5. Do not plug and unplug the SD card in the power on state, otherwise
it may cause the SD card to be damaged 6. Please purchased SD card through
regular channels and use a high-quality SD card with a storage capacity of
16GB-512GB and a transfer speed not lower than the Class10 standard. Inferior
SD cards may have problems such as the nominal read and write speed does not
match the real read and write speed, and the nominal capacity does not match
the real capacity. The Company shall not be liable for loss or damage to
videos caused by the use of inferior SD cards. 7. Usually the SD card will
have a service life, long-term use of the memory card may cause the video to
not be saved normally due to the decrease in writing speed, please replace the
new memory card in time when this happens. The Company shall not be liable for
the inability to save videos due to memory card
problems. 8. Keep this product away from strong magnetic fields, which may
cause damage to the device. 9. It is not allow to use this product in
environment which is above 60°C and below -10°C 10. Please use this product to
the extent permitted by law.
Warranty Description
The after-sales service of this product is strictly in accordance with the
“Law of the People’s Republic of India on the Protection of Consumer Rights
and Interests” and ” Law of the People’s Republic of India on the Product
Quality ” to implement the after-sales three-guarantee service, and the
service content is as follows:
1. Warranty period 1.1 Within 7 days from the day after signature, if the
product has the performance failure listed in the “Product Performance Failure
Table”, which is tested and determined by the CPPLUS after-sales service
center, and can enjoy free return or exchange service. 1.2 Within 8 days to 15
days from the day after signature, the performance failure listed in the
“Product Performance Failure Table” which is tested and determined by the
CPPLUS after-sales service center, and can enjoy free replacement or
maintenance services. 1.3 Within 12 months from the day after receipt, the
product has the performance failure listed in the “Product Performance Failure
Table”, which is tested and determined by the test of CPPLUS after-sales
service center and can enjoy free maintenance services.
2. non-warranty regulations 2.1 Unauthorized repair, misuse, collision,
neglect, abuse, liquid ingress, accident, alteration, incorrect use of non-
product accessories, or tearing, altering labels,
anti-counterfeiting marks. 2.2 The validity period of the three guarantees has expired. 2.3 Damage caused by force majeure. 2.4 The performance failure is not listed in the “Product Performance Failure Table”. 5. Due to human reasons, the performance failures of dashcam and its accessories listed in the “Product Performance Failure Table.”
3. Product Performance Failure Table
Model
Performance failures
CP-AD-H2B-W 1. The product is damaged
2. Unable to power on, unable to record
3. Unable to connect to the app
4. The keys are not functional
5. Other functions caused by factory hardware failure cannot be
used normally
Package List
Dashcam x1 Bracket x1 Car charging cable x1 Electrostatic sticker x1 Manual X1
Website: – www.cpplusworld.com Email id: – sales@cpplusworld.com; support@cpplusworld.com
References
- CP Plus: Advanced Security & Surveillance Solutions
- CP Plus: Advanced Security & Surveillance Solutions