ARTSUN VM-208N Bluetooth FM Transmitter with Gooseneck User Manual
- June 14, 2024
- ARTSUN
Table of Contents
ARTSUN VM-208N Bluetooth FM Transmitter with Gooseneck User Manual
Features
- Car battery voltage display function
- Hands-free calling with built-in microphone
- Bluetooth connection to mobile device (A2DP)
- Supports Bluetooth/Aux in/flash drive/MicroSD Card (MP3/WMA/WAV/FLAC)
- 30W charging (USB-C and USB-A)
Overview
Controls
Operation
SELECT SOURCE (BLUETOOTH, AUX INPUT, FLASH DRIVE, MICRO SD)
Pair Device
First-time setup:
– Power On
– Bluetooth indicator flashes in “Pairing Mode”
– Connected to “VM-208N” on smartphone
– Voice confirmation of successful connection
CONTROLS
” | ◀◀” / ” ▶▶ | ” Go back/ Skip song
“▶ Ⅱ ” Pause / Play
“ CH ” =Change source (Long press to switch AUX input/Flash drive/Micro
SD) MP3/WMA/WAV/FLAC Supported
Note: It will automatically enter AUX, Flash drive or Micro SD card mode when
connecting, and automatically return to Bluetooth mode after it is removed.
Important: Use source device for AUX input track controls.
HANDS-FREE CALLS
Note: May also use the Bluetooth connected device to disconnect the call.
Specifications
DC Input:12V-24V DC 5A
USB-A Output: 5V/2.1A
USB-C Output: 5V/3A 9V/2.22A
Bluetooth Version: V5.3
Audio Frequency: 20Hz~20kHz
Working Current: 70mA(Max)
Bluetooth Working Frequency: 2.402~2.480Ghz
Bluetooth Effective Distance: 32ft
FM Emission Effective Distance: 6ft
Sensitivity: -89dBm
FM Frequency: 88.1MHz-107.9MHz
⭐ Please note product features will be upgraded without any notice.
Legal
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
⚠ Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’ s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Bluetooth Trademark Statement
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Artsun Enterprise Company Limited is
under license. Other trademarks and trade names are those of their respective
owners.
Walmart, Inc., Bentonville, AR72716 https://www.walmart.com CUSTOMER SERVICE: support@meiditech.com
Safety Precautions
⚠ WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Troubleshooting
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. NOTE: This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. To
maintain compliance with FCC’s RF Exposure guidelines, This equipment should
be installed and operated with minimum distance between 20cm the radiator your
body: Use only the supplied antenna.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>