rizoma EE097 Wiring Kit for Turn Signal and Mirror Instruction Manual
- October 31, 2023
- rizoma
Table of Contents
rizoma EE097 Wiring Kit for Turn Signal and Mirror
Product Information
- The Rizoma products are high-quality accessories designed for motovehicles. They provide both style and functionality to enhance your riding experience. It is important to read and follow the instructions in this user manual as they are an essential part of the product. For any doubts or questions regarding the installation or usage of the product, please contact an authorized RIZOMA dealer.
- It is crucial to properly install the accessories by following the correct positioning and tightening procedures. Avoid forcing the moving parts once they are locked to maintain the integrity and proper functioning of the product. Please note that some Rizoma products may not be compatible with your specific motovehicle or other aftermarket accessories previously installed. To ensure your safety, always consult with your trusted Authorized RIZOMA dealer.
- The user manual also highlights that descriptions preceded by a specific symbol contain critical information, instructions, or procedures that, if not followed, may result in death or serious injury. Therefore, it is essential to carefully read, understand, and adhere to these instructions.
- Regular inspection and maintenance of your RIZOMA products are necessary. The more you ride, the more frequently you should inspect them. If you notice any signs of leakage, bending, deformation, cracks, chips, or wear, no matter how slight, it is important to have a RIZOMA dealer inspect the products before riding again. Never attempt to repair or modify the Rizoma products or their components on your own. Always replace them with Rizoma original components.
Product Usage Instructions
- After purchasing a RIZOMA product, carefully read the user manual provided.
- Ensure that you have all the necessary tools and equipment for installation
- Follow the step-by-step instructions for proper installation, paying attention to the correct positioning of the accessories.
- Do not force the moving parts once they are locked to avoid compromising the product’s functionality.
- After installing any Rizoma product, check that all related components of the motovehicle (e.g., brakes, throttle, clutch, lights, and steering) are functioning correctly.
- Periodically repeat these checks, especially after long trips or prolonged periods of not using the bike.
- Regularly inspect your RIZOMA products for any signs of leakage, bending, deformation, cracks, chips, or wear. If any issues are found, have a RIZOMA dealer inspect them before riding again.
- Never attempt to repair or modify the Rizoma products or their components. Always replace them with Rizoma original components.
- Contact your RIZOMA dealer if you have any doubts or questions regarding the installation or usage of the product.
Remember that the warranty may not be valid if the products are not installed
or used according to the provided instructions. It is also important to
disconnect the battery before starting the installation process for certain
components to avoid electrical shock hazards.
Please note that the indicated time of assemblage does not include the removal
of OEM components. Ensure that you have allocated enough time and follow the
instructions thoroughly for a successful installation.
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you for your excellent choice. Please carefully follow the instructions in
this guide, which will allow you to mount and use the product correctly and
enjoy all the features it has. For your protection and safety, RIZOMA
expressly recommends that you have the installation of the product performed
by skilled personnel. Improper installation, repair or maintenance, can cause
accidents. Keep this user guide as a reference for the future. RIZOMA accepts
no liability for any damage, of any kind, which may be caused, directly or
indirectly, to persons or things as a result of incorrect assembly or failure
to observe all the assembly instructions. We also invite you to comply with
the provisions of the Highway Code and Traffic rules and/or to additional
regulations in force in your Country.
General conditions
Attention: This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding.
- Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
- Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components.
- Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact your RIZOMA dealer.
- O.E.M.: original equipment manufacturer.
ABOUT PRODUCT
- Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. The warrantee is not valid for any electric wires cutting or any product modify or tampering.
- Improper installation could damage the electrical system of the motorcycle and cause a fire, resulting in personal injury or death. Electrical shock hazard. Disconnect the battery before starting to install turn license plate bracket or rear light or the turn signals. The pins must always be isolated and respect the polarity in the connections. The warrantee is not valid for any electric wires cutting or any product modify or tampering.
INSTALLATION INSTRUCTION
-
Step 1: INSTALL ELECTRIC WIRING****
-
Step 2: INSTALL TURN SIGNAL****
Warnings
- RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.
- The action depicted is performed by professionals under strictly controlled riding conditions.
- Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
- All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full face helmet), that has been approved by ANSI , SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full finger gloves, boots, and body armor.
- Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle.
- Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.
Legal notes
Some of our products may not be approved for road circulation in the countries
where homologation is required. Thus RIZOMA® srl declines any responsibility
for a different use of its products.