CP PLUS V41A Ezykam HD WiFi CCTV Security Camera User Guide

CP PLUS V41A Ezykam HD WiFi CCTV Security Camera

Product Information

The ezykam Wi-Fi Camera is a smart home device that allows users to monitor their home remotely. The camera can be controlled using the ezykam+ app, which is available for download on the App Store or Google Play. The camera can be shared with family and friends, and voice control is available through Alexa or Google Assistant-enabled devices.

Frequently Asked Questions

• Can I share the camera with family and friends?
  Yes, you can share your cameras with family and friends who will have access to view the camera.

• What’s the Wireless Range?
  The range of your home Wi-Fi is heavily dependent on your home router and the conditions of the room. Check with your router specifications for exact range data.

• How many cameras can I control?
  You can control cameras in an unlimited amount of locations. Your router may have a limit on how many cameras can be connected to one router.

Technical Specifications

• System Requirements: iOS 9.0 or higher or AndroidTM 5.0 or higher
• Voice Control: Alexa or Google Assistant

Product Usage Instructions

1. Download the Ezykam+ app from the App Store or Google Play Store.
2. Register an account on the Ezykam+ app.
3. Plug in the ezykam Wi-Fi Camera using the provided power adapter.
4. Follow the in-app instructions to add the camera to your home Wi-Fi network.
5. Once the indicator light on the camera turns to steady blue light, the network configuration is complete.
6. You can share the camera with family and friends by granting them access through the Ezykam+ app.
7. Voice control is available through Alexa or Google Assistant-enabled devices.
8. If you experience any issues with connecting to your Wi-Fi network, make sure you have entered the correct Wi-Fi password and check for any internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.
9. If you have any further questions or issues, please contact  [email protected] for assistance.

Please read the instructions carefully before using the product

Add Camera

• Open the ezykam+ app, click “+” on the top right corner of the “HOME” page, then select “Specific model to add”.
• Make sure that the Red LED indicator is blinking and the voice prompt is audible.
• Enter your “Wi-Fi network and password”, and click “CONFIRM”.

Add Camera

• Read the instruction about “Scan the camera QR code” and click “Continue”.
• Scan the QR Code on your phone with a camera. Heard a voice prompt, click “Heard the beep”

Add Camera

• When the indicator light on the device turn to steady blue light, the network configuration is complete.
• Please refer to the specific APP interface if there are any differences.

Frequently Asked Questions

1. Can I share the camera with family and friends?
   Yes, you can share your cameras with family and friends who will have access to view the camera.

2.   What’s the Wireless Range?
   The range of your home Wi-Fi is heavily dependent on your home router and the conditions of the room. Check with your router specifications for exact range data.

3. Does the camera appear offline or unreachable?
   Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there is any Internet connection problem. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.

4. Cannot connect to your Wi-Fi network.
   Make sure you entered the correct Wi-Fi
   password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.

5.   How many cameras can I control?
   CP Plus app can control an unlimited number of cameras in an unlimited amount of locations. Your router may have a limit of how many cameras can be connected to one router.

Voice control works with Alexa or Google Assistant

You can control your camera using just your voice with Alexa or Google Assistant-enabled devices.

System Requirements

• Smartphone running iOS 9.0 or higher or Android L” 5.0 or higher
• Existing Wi-Fi Network with an Internet connection

Technical Specifications

• Resolution: CP-V21 = 1920×1080@15fps, H.264 encoding CP-V21 A = 1920×1080@20fps, H.264 encoding CP-V31 A = H.265 encoding CP-V41 A = 2560×1440@20fps, H.265 encoding
• Audio: Internal Speaker and Microphone
• Storage : supports up to 128GB Micro SD card (not included)
• Wi-Fi: IEEE 802.11 b/g/n, 2.4GHz (not compatible with 5GHz Wi-Fi networks)

Thank you for choosing CP PLUS ezykam. Get started using your new devices by downloading the ezykam+ app, one convenient app that manages everything straight from your smartphone. Easily connect to your home Wi-Fi and control multiple devices from the touch of your fingertips

What’s in the Box

Get Ready

• Know your Wi-Fi network and password.
• Make sure your mobile device is running iOSB 9.0 or higher or Android 5.0 or higher.
• Make sure you’re connecting to a 2.4GHz Wi-Fi network (It can’t connect to 5GHz networks)

1. Download the Ezykam+ app from App Store or on Google Play Google Play and Gcxjgle Horne are trademarks Of Google LLC. Amazon, Alexa, and all related logos are trademarks ofAmazon.com, lnc.or its affiliates
2. Register an account on your ezykam+ app
   • STEP 1
   • Select the country.
   • Enter the email address.
   • STEP 2
   • Enter the verification code and create a password
3. Plug in How do I reset my camera?
   • Use the reset pin to press the Reset Button for several seconds until the camera starts to beep.
   • Optional: Insert Micro SD card

For further assistance, you can reach us via e[email protected]
Please read the instruction carefully before using the product

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>