CP PLUS F41A ezykam Wi-Fi Camera Installation Guide

Quick Operation Guide
F41A

F41A ezykam Wi-Fi Camera

‘Thank you for choosing CPPIus ezykam.

For further assistance, you can reach us via ezycare@cpplusworld.com
Please read the instrucefully before using the product
Voice control works with Alexa or Google Assistant

• You can control your camera using just your voice with Alexa or Google Assistant-enabled devices.

*Alexa capability only include streaming video and not controlling the light.

Installation Instruction

Power cord colors respectively

1. Black: live wire (L)|
---|---
2. White: zero wire (N)|
3. Yellow + Green: ground wire €|

Bracket installation

System Requirements

• Smartphone running i05* 9.0 or higher or Android™ 5.00r higher
• Existing Wi-Fi Network with internet connection

Technical Specifications

• Camera: up to 4MP (2560×1440) at 20frames / sec. H265 encoding
• Fleld of view: 3.6MM 85.9°(H), 45.5°(V),107 “(0)
• Audio: Internal Speaker and Microphone
• Storage: supports up to 128GB Micro SD card (not included)
  Wi -Fi IEEE 802.11b/g/n, 24GHz (not compatible with 5GHz Wi-Fi networks)

Thank you for chaosing CP PLUS ezykam. Get started swing your new devices by downloading ezykam+ app, one convenient app that manages everything straight from your smart phone. Easily connect toyour home.
Wi-i and control multiple devices from the touch of your fingertips.

What’s in the Box

Get Ready

• Know your Wi network and password.
• Make sure your mobile device is running 105° 9.0 or higheror Android™ 5.0 or higher.
• Make sure yourre connecting to a 2.4GHz Wil network (Itcan’t connect to SGHz networks)

Download the ezykam+ app from App Store or on Google Play.

http://mobapp.cppluscloud.com/store/ezykamplus

Register an account on your ezykam+app.

STEP 1

• Select the country.
• Enter the email address.

STEP 2

• Enter the verification code and create a password

Plugin

How do i reset my camera?

• Use the reset pin to press the Reset Button forseveral seconds until the camerastarts to. beep.
• Optional: Insert Micro SD card

Add Camera

• Open ezykam+ app, click +”on the top right corner of the” HOME page, then select “Specific model to add
• Make sure that the Red LED indicator s blinking and voice prompt is audible.
• Enter your “Wi i network and password’, Click” CONFIRM

Add Camera

• Read the instruction about *Scan the camera QR code’ and dlick “Continue’
• Scan the QR Code on your phone with camera. Heard 2 voice prompt, lick “Heard the beep’

http://uqr.me/joewaters/qr/QRC4Df0205

4.1 Add Camera

• When the indicator light on the device turn to steady blue ight, the network configuration is complete.
• Please refer to the specific APP interface If there are any difference.

Frequently Asked Questions

1. Can I share camera with family and friends?

Yes, you can share your cameras with family and friends who will haw access to view the camera.

2. What's the Wireless Range?

The range of your home W-Fi is heavily dependent on your home router and the conditions of the room. Check with your router specifications for exact range data.

3. The camera appears offline or unreachable?

Make sure you entered the correct password during the W-Fi setup. Check whether there is any Internet connection problem. If the W-Fi signal is too weak, reset your W-Fi router and try again.

4. Cannot connect to your Wi-A network.

Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the W-Fi signal is too weak, reset your Wi-Fi router and try again.

5. How many cameras can I control?

CP Plus app can control unlimited number of cameras in unlimited amount of locations. Your router may haw a limit of how many cameras can be connected to one router.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>