CP Plus E21 ezykam Wi-Fi Camera Instruction Manual
- June 10, 2024
- CP PLUS
Table of Contents
CP Plus E21 ezykam Wi-Fi Camera
Product Information
The product is a Wi-Fi camera that can be easily connected to your home Wi-Fi network and controlled using the ezykam+ app on your smartphone. The camera can be shared with family and friends, and voice control is available through Alexa or Google Assistant-enabled devices. The Wi-Fi range of the camera is dependent on the home router and the conditions of the room. The camera indicator light turns to steady blue when the network configuration is complete.
Product Usage Instructions
- Download the Ezykam+ app from the App Store or Google Play.
- Register an account on the Ezykam+ app.
- Plug in the ezykam Wi-Fi camera and connect it to power using the power adapter.
- Follow the instructions in the Quick Operation Guide to set up the camera on your home Wi-Fi network.
- If you hear a voice prompt during setup, click “Heard the beep”.
- The camera can be shared with family and friends through the ezykam+ app.
- Voice control is available through Alexa or Google Assistant-enabled devices.
- If the camera appears offline or unreachable, check the Wi-Fi password and internet connection. Resetting the Wi-Fi router may also help if the signal is too weak.
- The number of cameras that can be connected to one router may be limited by the router specifications.
- Contact ezycare@cpplusworld.com for further assistance.
Make sure to read the instructions carefully before using the product.
Thank you for choosing CP PLUS ezykam. Get started using your new devices by downloading the ezykam+ app, one convenient app that manages everything straight from your smartphone. Easily connect to your home Wi-Fi and control multiple devices from the touch of your fingertips.
What’s in the Box
Get Ready
- Know your Wi-Fi network and password.
- Make sure your mobile device is running iOS® 9.0 or higher or Android™ 5.0 or higher.
- Make sure you’re connecting to a 2.4GHz Wi-Fi network (It can’t connect to 5GHz networks).
- Download the ezykam+ app from App Store or on Google Play.
- Register an account on your ezykam+ app.
STEP 1
- Select the country.
- Enter the email address.
STEP 2
- Enter the verification code and create a password.
Plugin
- How do I reset my camera?
- Use the reset pin to press the Reset Button for several seconds until the camera starts to beep.
- Optional: Insert Micro SD card.
Add Camera
-
Open the ezykam+ app, click”+” on the top right corner of the “HOME” page, then select “Specific model to add”.
-
Make sure that the Red LED indicator is blinking and the voice prompt is audible.
-
Enter your “Wi-Fi network and password”, click “CONFIRM”.
Add Camera
- Read the instruction about “Scan the camera OR code” and click “Continue”.
- Scan the QR Code on your phone with a camera. Heard a voice prompt, click “Heard the beep”.
Add Camera
- When the indicator light on the device turns to steady blue light, the network configuration is complete.
- Please refer to the specific APP interface if there are any differences.
Frequently Asked Questions
- Can I share the camera with family and friends? Yes, you can share your cameras with family and friends who will have access to view the camera.
- What’s the Wireless Range? The range of your home Wi-Fi is heavily dependent on your home router and the conditions of the room. Check with your router specifications for exact range data.
- Does the camera appear offline or unreachable? Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there is any Internet connection problem. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.
- Cannot connect to your Wi-Fi network. Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.
- How many cameras can I control? CP Plus app can control an unlimited number of cameras in an unlimited amount of locations. Your router may have a limit of how many cameras can be connected to one router.
Voice control works with Alexa or Google Assistant
- You can control your camera using just your voice with Alexa or Google Assistant-enabled devices.
System Requirements
- Smartphone running iOS® 9.0 or higher or Android™ 5.0 or higher.
- Existing Wi-Fi Network with internet connection.
Technical Specifications
- Resolution: CP-E21= 1920×1080@15fps, H.264 encoding
- CP-E21A= 1920×1080@20fps, H.264 encoding
- CP-E31A= 2304×1296@20fps, H.265 encoding
- CP-E41A= 2560×1440@15fps, H.265 encoding
- Audio: Internal Speaker and Microphone
- Storage: supports up to 128GB Micro SD card (not included)
- Wi-Fi: IEEE 802.11b/g/n, 2.4GHz (not compatible with 5GHz Wi-Fi networks)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>