PXN 9607X Wireless Gaming Controller User Manual
- June 16, 2024
- PXN
Table of Contents
- PXN 9607X Wireless Gaming Controller
- Product Information
- Product Usage Instructions
- Frequently Asked Questions (FAQ)
- Product Overview
- System Requirement
- Connect with Switch Console
- Power ON/OFF and Wake-up
- Connect with PC
- NFC Function
- TURBO Function
- Reset Function
- Adjustable Vibration
- Controller Sensor / 3D Joystick Calibration
- Charging Function
- Sleeping Function
- Attention
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PXN 9607X Wireless Gaming Controller
Product Information
Specifications:
- Support platform: Switch Console/ PC/ iPhone
- Supported Systems: Windows 7/ 8/ 10/ 11, iOS 16+
- Connectivity: Bluetooth, Type-C cable
- Power: USB rechargeable battery
- TURBO function: A / B / X / Y / L / R / ZL / ZR buttons
- Rapid Fire Rate: Adjustable (8 times/second, 10 times/second, 12 times/second)
Product Usage Instructions
01 Product Overview
The PXN gaming controller features various buttons and indicators:
- Screenshot Button
- Type-C Connecting Port
- R, L, ZL, ZR buttons
- HOME LED Indicators
- TURBO button
02 System Requirement
The PXN gaming controller is compatible with the following platforms and systems:
- Supported Platforms: Switch Console/ PC/ iPhone
- Supported Systems: Windows 7/ 8/ 10/ 11, iOS 16+
03 Connect with Switch Console
To connect the PXN gaming controller with the Switch console:
- Click the [Change Grip/Order] option on the Switch Homepage.
- Long press the Power Button for 3 seconds until the LED indicators on the controller start flashing.
- Wait for the LED to remain ON, indicating successful pairing.
- Press the [HOME] button to go back to the Homepage.
Note: Use a Type-C cable and OTG Adapter to connect the controller and Switch console. The Type-C OTG Adapter is not included.
04 Power ON/OFF and Wake-up
To power ON or OFF the PXN gaming controller and wake it up from sleep mode:
- Power ON:
- Press the Power Button for 3 seconds to turn ON and enter pairing mode.
- Wake-up Controller:
- Short press any button on the controller to wake it up and reconnect.
- Power OFF:
- Short press the [HOME] button, then press the [ ] button to power OFF the controller and reset the settings.
- Wake-up function can be used to reconnect the console after power OFF.
05 Connect with PC
To connect the PXN gaming controller with a PC:
- Make sure the controller is OFF or in sleeping state.
- Connect the controller to the PC using a USB cable.
- The PC will prompt new hardware installation automatically.
- The connection is successful when LED2 indicator starts flashing.
06 NFC Function
The PXN gaming controller has a built-in NFC function for using figures and chips:
- When the controller is connected to the Switch console via Bluetooth, place the Amiibo figure above the [ ] logo to activate the tool if the game supports Amiibo function.
- It is recommended to use genuine Amiibo figures for better compatibility.
07 TURBO Function
The PXN gaming controller allows setting buttons for TURBO function:
- Manual TURBO: After the first setting, hold press the setting button to launch TURBO manually.
- Auto-TURBO: After the second setting, press the function button to launch TURBO automatically. Press the button again to stop the Turbo function.
- Clear TURBO Setting: After the third setting, the TURBO function will be cleared. Clear all button TURBO function.
- Adjustable Rapid Fire: Long press the [ ] button and operate the UP/Down of Right joystick simultaneously to adjust the rapid fire rate. The default rate is 10 times/second.
Frequently Asked Questions (FAQ)
Q: What platforms are compatible with the PXN gaming controller?
A: The PXN gaming controller is compatible with Switch Console, PC, and iPhone.
Q: What systems does the PXN gaming controller support?
A: The PXN gaming controller supports Windows 7/ 8/ 10/ 11 and iOS 16+.
Q: How do I connect the PXN gaming controller with the Switch console?
A: Follow these steps to connect the PXN gaming controller with the Switch console:
- Click the [Change Grip/Order] option on the Switch Homepage.
- Long press the Power Button for 3 seconds until the LED indicators on the controller start flashing.
- Wait for the LED to remain ON, indicating successful pairing.
- Press the [HOME] button to go back to the Homepage.
Q: How do I power ON and OFF the PXN gaming controller?
A: To power ON the PXN gaming controller, press the Power Button for 3 seconds. To power OFF, short press the [HOME] button, then press the [ ] button. The controller can also be woken up from sleep mode by short pressing any button.
Q: How do I adjust the rapid-fire rate on the PXN gaming controller?
A: Long press the [ ] button and operate the UP/Down of Right joystick simultaneously to adjust the rapid fire rate. The default rate is 10 times/second.
Thank you for choosing and supporting PXN, please read this manual carefully before starting to enjoy your gaming experience.
Product Overview
System Requirement
Support platform: Switch Console/ PC/ iPhone Supported Systems: Windows 7/ 8/ 10/ 11, iOS 16+
Connect with Switch Console
Wireless Connection
- Click [ ] Controller → Change Grip/Order on Switch Homepage.
- Long press [ ] Power Button for 3 seconds, the Four LED indicators on the controller will flash circularly when the remaining battery life displaying and then enter the pairing state.
- The LED will remain ON when the pairing is successful. Then press [ ] button to back to the Homepage.
Switch Console Reconnect and Wake-up
After connecting successfully, press [ ]button on the Controller can wake up
and reconnect the sleeping Switch console.
Wired Connection
Click [ ] Setting on Switch homepage → Controllers and Sensors → then click Pro Controller Wired Connection. Please make sure this option state is ON.
Switch Console:
- Before using the wired connection, please make sure the Controller is OFF or in a sleeping state
- Use a Type-C cable and OTG Adapter to connect the controller and Switch console.
- The connection is successful when LED indicator in the Controller flashing. ( Note: The Type-C OTG is not included )
Switch Dock:
Before using the wired connection, please make sure the Controller is OFF or in a sleeping state.
- Use a Type-C cable and OTG Adapter to connect the controller and Switch Dock.
- The connection is successful when the LED indicator in the Controller flashing
Power ON/OFF and Wake-up
Connect with PC
Wired Connection
Before using the wired connection, please make sure the Controller is OFF or in sleeping state.
- Connect the Controller with PC by USB cable.
- The PC will prompt new hardware and install automatically, the connection is successful when LED2 indicator flashing
Testing Function
Function testing is available when use in computer. The specific steps show below: Open Control Panel → Devices and Printers → Right mouse click Controller icon → Game Controller Setting, click Properties Testing.
NFC Function
The Controller has a built-in NFC function, supported to use figures and chips. (Recommend to use genuine Amiibo figures.)
Using Instructions:
When the Controller is connected to the Switch console by BT, if the game supports the Amiibo function, place the Amiibo above the [ ] logo can activate the tool.
TURBO Function
Buttons can be set for TURBO function: A / B / X / Y / L / R / ZL / ZR.
Manual TURBO: the LED indicator will be flashing when long press the setting button. Auto-TURBO: the LED indicator will flash quickly.
Reset Function
When the controller has any functional disorder, halt or other abnormality, press and hold the power button for 8 seconds to restore the factory settings.
Adjustable Vibration
Hold press the [ T] button on the Controller and operate the UP/Down of the left joystick at the same time to adjust the vibration level, It is in Medium Vibration in default when connected. Vibration adjustment has a memory function.
Controller Sensor / 3D Joystick Calibration
When the controller has a disorder or joystick problem, you can use the calibration function to fix it.
- In a sleeping state, press [ L3 + R ] to enter the calibration mode, the 4 LED indicators on the controller will flash alternately in 2 groups.
- Rotate the left stick and right stick for 2-3 turns.
- Place the controller on a horizontal table and press [+ ] button, the sensor and 3D joystick will automatically complete after releasing the button in 3 seconds.
Charging Function
Using a standard USB 5V input, the controller will be fully charged in 2-3 hours.
Sleeping Function
Attention
- Avoid strong vibration, do not disassemble, modify or repair by yourself.
- Prevent water or other liquids from entering the controller to avoid damage.
- Avoid storing in humid, high temperature, oily smoke and other places.
- Built-in battery, please do not throw the controller into fire to avoid explosion.
- If you have any problems or suggestions about the product, please contact the seller or the after-services.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>