SOUNDPEATS SPE-0052 Life Active Noise Cancelling Earbuds User Manual
- June 16, 2024
- SoundPEATS
Table of Contents
- BLUETOOTH
- How to pair Sound PEATS Air3-Deluxe?
- Case 2
- **When using the Bluetooth device in the pocket of the chest or pants,
- If the engine ear is diagonal to the Bluetooth device, it will affect
- When put the Bluetooth device in a pocket or bag, move the Bluetooth
- Bluetooth communication.
- Case 3
- When using the earbuds closes to the other Bluetooth devices.
- The earbuds may be affected by these radio waves when
- using them in a location with a mixture of multiple radio waves.
- Turn off the Bluetooth function of the other Bluetooth devices.
- Case 4
- **When using the device away from the earbuds, such as in a different
- Bluetooth communication gradually becomes weaker the further away
- communication may be weak.
- Keep the Bluetooth earbuds as close to the Bluetooth player as possible.
- Case 5
- When playing music in Game mode.
- Please exit the game mode when you listen to music.
- Case 6
- **When a lot of applications are running at the same time when use the
- Quit apps which you are not
- using on the device to reduce the load.
- CHARGING
- What does the LED on the charging case tell?
- What should I do if the charging case won’t charge?
- What can I do if any earbud stopped charging?
- Why are the earbuds still connected to my phone after placingbackinto the
- The battery life is not as advertised?
- What can I do if the touch controls do not work always?
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SOUNDPEATS SPE-0052 Life Active Noise Cancelling Earbuds User Manual
BLUETOOTH
How to pair Sound PEATS Air3-Deluxe?
At first, open the charging case lid and take out both earbuds, then remove the insulating film and put them back. 1. Open the charging case lid while the case is with enough power left, press and hold the button on the charging case for 3 seconds until the whit light flashes, both earbuds will turn on and enter pairing mode. 2. Activate Bluetooth on the device, and choose
How to reset Sound PEATS Air3-Deluxe?
(Try the following steps if you fail building connection between two earbuds, or between earbuds and device.) 1. Clear the pairing record from all your devices. Place back both earbuds, thwited light on the charging case flashes twice, the earbuds starts charging. 2. With the case lid open, press and hold the charging case button for 10seconds until the white light flashes 2 times, reset complete. 3. Close the case lid and reopen to activate the earbuds.
Why does the sound of the earbuds cut or noise occur?
| Reasons| Workarounds
---|---|---
**Cas 1| When using the earbuds close to personal
computers, Wi-Fi routers, microwave ovens, refrigerators, etc.**
Refrigerators, microwave ovens, Wi-Fi routers, personal computers, etc. are
devices that emit radio waves.The earbuds may be affected by these radio waves
when using them in a location with a mixture of multiple radio waves.| Please
use the earbuds away from Wi-Fi routers, personal computers, microwave ovens,
refrigerators, etc. in order to avoid radio wave interference.
Case 2
|
**When using the Bluetooth device in the pocket of the chest or pants,
or a bag while listening to the audio.**
If the engine ear is diagonal to the Bluetooth device, it will affect
the Bluetooth signal. As human body is the biggest source of signal blocking.
|
When put the Bluetooth device in a pocket or bag, move the Bluetooth
device to a place where there are no obstacles between Bluetooth device and earbuds (such as the human body) for
Bluetooth communication.
---|---|---
Case 3
|
When using the earbuds closes to the other Bluetooth devices.
The earbuds may be affected by these radio waves when
using them in a location with a mixture of multiple radio waves.
|
Turn off the Bluetooth function of the other Bluetooth devices.
Case 4
|
**When using the device away from the earbuds, such as in a different
room.**
Bluetooth communication gradually becomes weaker the further away
Bluetooth earbuds are placed from a Bluetooth player.When using Bluetooth earbuds and a Bluetooth player in different rooms with the doors closed, Bluetooth
communication may be weak.
|
Keep the Bluetooth earbuds as close to the Bluetooth player as possible.
Case 5
|
When playing music in Game mode.
|
Please exit the game mode when you listen to music.
Case 6
|
**When a lot of applications are running at the same time when use the
Bluetooth function.**
|
Quit apps which you are not
using on the device to reduce the load.
).push({});
" headline-2="h2" question-2="What can I do if the earbuds connect to my phone, but not memcomputer?" answer-2="1. UNPAIR the earbud from the phone, then the earbuds will lose Bluetooth connection to the phone and enter into pairing mode. 2. Put the earbuds into the charging case to reset. 3. If those do not help, you may need to update your computer's Bluetooth driver. There is no driver for the earbuds. Bluetooth drivers must come from the specific manufacturer for your exact computer model. Download and install theppropriate Bluetooth driver from the computer vendor's website, then restart your system before attempting to pair and connect to Sound PEATS earbuds." image-2="
" headline-3="h2" question-3="Why does the volume of the earbuds reduce after using a period of time?" answer-3="It may be caused by the sound hole being blocked by foreign objects. Please try to gently clean off the screen with a little alcohol to avoid dust or secretion blocking" image-3="
" headline-4="h2" question-4="What can I do if one earbud is quieter than the the other?" answer-4="1. Please try to gently clean off the screen with a little alcohol to avoid dust or secretions blocking. 1. Please change other songs or videos. For some songs and videos, the sound effect is unstable. 2. Please change other devices. You can try this way: - UNPAIR and delete from your original device - Pair to a new device and play music - UNPAIR and delete from this new device - Pair back with original device 3. Try to reset the earbuds" image-4="
" headline-5="h2" question-5="Why the other side could not hear me when calling?" answer-5="1. Please choose to pick up phone calls via the earbuds. 2. Please do not mute the phone calls. 3. Please clean the Mic holes to avoid dust or secretions blocking. 4. Please kindly adjust the volume through the earbuds and devices. 5. If you are using the earbuds with an Android phone, please check the settings to see if you have allowed both phone audio and media audio to be transmitted through the earbuds. 6. Please change other devices to have a try.
" image-5="" headline-6="h2" question-6="How the Game mode works?" answer-6="Air3-Deluxe adopts the latest technology to ensure low latency in game mode and make sure the sound sync with the image. Triple tap on the left MFB to activate the game mode with a voice prompt “Game Mode” and deactivate the mode with a prompt “Exit Game Mode”" image-6="" count="7" html="true" css_class=""]
CHARGING
What does the LED on the charging case tell?
The LED flashes slowly while charging the case. Red light 0-19% Yellow light 20%-69% Green light 70%-99% Green light stays on 100%
What should I do if the charging case won’t charge?
1. Use a Type-C adapter to charge the case(current not more than 1A). The indicators flashes while charging. 2. Please charge the earbuds and charging case as least once per 3 months when not in use for a long time.
What can I do if any earbud stopped charging?
As there is no light on the earbuds when charging for Air3-Deluxe, you need to put the left earbud and right earbud one by one separately into the charging case to check. If the green light on the charging case is on, the earbud can be charged normally. If no light comes on, please use a bit of light sandpaper tolan the charging connectors on the earbuds and try to adjust the ear ud to ensure there has green light flash on the case
Why are the earbuds still connected to my phone after placingbackinto the
case?
The battery life is not as advertised?
A single charge will not support continuous use for 22 hours. The earbuds work5 hours for a single charge and the charging case provides extra3.5recharges.
What can I do if the touch controls do not work always?
1. Please touch the middle of the control area, and keep your hands dry, theearbuds may not response on wet fingers. 2. Please try to skip songs for more times to find your ideal frequencytocontrol the earbuds. 3. Please touch the control area with different forces/angles/time to seeif it works. 4. Another way for you to have a try: discharge the earbuds, then chargeandreset
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>