User Manual

Smart WiFi Lock with Fingerprint

Fingerprint Intelligent lock manual
(Support Tuya Smart) Ideal for metal grill doors, wooden doors, home door locks, office door locks, etc
Functions, and Operations

1. 1)Unlock information: refers to the input fingerprint, password, or IC card information (including administrators and ordinary users).
   2)Key “#” : Clear key/back key. 3)Key “#” : Confirm key/Enter menu function key.
   2. 1) The factory administrator’s initial password is 123456, under the initial state any fingerprint, IC card, or password can open the lock.

2.  Access door lock function management

1. Administrator settings
   1 ) Add administrator press “1” Add administrator press “1”, enter administrator information, input fingerprint or password(Fingerprint inputting 4 times, password input 6-8 bit digital twice(888888#), IC card input once.
   2 ) Delete administrator information press “2” Enter number press # confirm(002#)(Unable to delete all, the first administrator reserved)
   3 ) Add a network Hotspot connection press “1”
   Intelligent connection press “2” (TUYA)

2. Ordinary user settings

1. Add user information Press “1” voice prompt: input unlocking information, input fingerprint or password(Fingerprint inputting 4 times, password input 6-8 bit digital twice (888888#), IC card input once. After operation successfully it’s able to input other user information.
   2)Delete user information Press” 2″ voice prompt: press ” 1″ delete user number, press delete all, press input number(010#) delete successfully.
   3). System setting Press voice prompt: press voice setting, press unlocking mode, press language setting, press “4” time setting, press change room number.
2. Voice setting: Press “1” voice prompt: Turn on voice; press Turn off voice
3. Unlocking mode setting Press voice prompt: press “1” single unlock mode, press combine unlock mode.
4. Language setting Press “3” voice prompt: press “1” Chinese, press English.
5. Time setting Press “4” voice prompt: Present time is 201903041153, please modify. Please modify based on the format year-month-day, 202004181613, press

   confirm.

6. Room number modification Press “5” voice prompt: room number 8888, please modify correct room number(4 bit), press # confirm.
7. Add/delete remote controller (Remote control module interface reset button on back panel)

1. Add remote controller: Press and hold the remote control module interface reset button on the back panel, release after 5 beeps tone, and now press any button on the remote controller, after 3 beeps tone, the remote controller adding is now successful.
2. Delete remote controller: Press and hold the remote control module interface reset button on the back panel, release after 5 beeps tone, and now press any button on the remote controller, after a long beeps tone, the remote controller is successfully removed.
   To delete all remote controllers: Press and hold the remote control module interface reset button on the back panel, release it after 12 beeps tone, and all remote controllers will be deleted.

4. Restore factory setting (Press and hold around 8s, and hear a beeps tone reset successfully)
Others:

1. The system will automatically enter the invalid input state if the unauthorized unlocking information is continuously incorrectly input more than 5 times within 5 minutes, and the invalid input state will last for 90 seconds.
2. After the voltage is lower than 4.5v, the lock will automatically alarm every time when it is opened. After the alarm, the lock can be opened 200 times. After the number of times exceeds, each unlock delay is 5 seconds, and new batteries must be replaced before the number of times available.
3. Password peeping prevention function: Input password as follows when opening the door with password: XXX password XXX; you can add some extraneous codes before and after the password, and then press # to confirm. The password must be included in the input contents.
   4 ) If there is no operation for more than 10 seconds, the system will automatically exit.
   5 ) Initialization setting: Long press the rear panel initialization button for 5 seconds to initialize, all unlock information and records will be cleared after initialization (Please be careful operation).

Technical Parameters

Technical Parameters

Working Voltage| 4X AA 5# alkaline batteries (Not included)Or 12V power supply
Static current| <50-65pA
Administrator| 9 group
Unlock ways| Fingerprint, Card, Password, Key(Optional for Tuya app or Remote controller)
Working current| >250mA(Strong Drive)
Fingerprint Capacity| < =100
Card Capacity| < =100
Password Capacity| < =100
Remote control capacity| < =30
Password| 6-8 bit
Virtual password| 16 bit
Low voltage alarm| 4.5±0.2V
Working Temperature| -10°C — 60°C
Humidity| 20% — 93%

Interface specification

Note: Wi-fi module or Remote controller module it’s optional, provide on request.

Install Diagram

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>