HORI NSW-465U Split Pad Compact Controller Instruction Manual
- June 16, 2024
- HORI
Table of Contents
Instruction Manual
Thank you for purchasing this product.
NSW-465U Split Pad Compact Controller
Before using this product please read the instructions carefully.
After reading the instruction manual, please keep it for reference.
Split Pad Compact for Nintendo Switch™
Please check that your Nintendo Switch is up to date before using this product.
From the Home Menu
Select ‘System’ and then ‘System Update’ to update to the latest system
firmware.
Included
Layout
Caution
Do not touch any of the buttons or sticks when turning on the console,
attaching, or registering the controllers.
Troubleshooting
– Please check that the Split Pad Compact is properly attached to the Nintendo Switch™
- Check that the Nintendo Switch™ is up to date to the latest system firmware
Platform
Nintendo Switch™
Assign Mode
Assign mode allows you to assign button functions to the FL and FR buttons.
*Cannot be assigned to multiple buttons at the same time
FL Button
Assignable buttons
L Button / ZL Button / L Stick Button / D-pad (UP, DOWN, LEFT or RIGHT) / –
Button
FR Button
Assignable buttons
R Button / ZR Button / R Stick Button / A Button / B Button / X Button / Y
Button / ＋ Button
- Please use the ASSIGN Button (L) when setting button functions to FL Button.
Please use the ASSIGN Button (R) when setting button function to FR Button.
Turbo / Turbo Hold Mode
Turbo Mode can be set to 3 different speeds.
The following buttons can be set to Turbo or Turbo Hold mode
Controller (L)
L Button / ZL Button / L Stick Button / D-pad (UP, DOWN, LEFT or RIGHT)1 / FL
Button 2
Controller (R)
R Button / ZR Button / R Stick Button / A Button / B Button / X Button / Y
Button / FR Button*3
1 D-Pad (UP, DOWN, LEFT or RIGHT) is not compatible with the Turbo hold mode, and can only be used to set Turbo mode.
2 The FL Button will function only when a button function is assigned to it.
*3 The FR Button will function only when a button function is assigned to it.
How to set up Turbo Function
- Please use the TURBO Button (L) and the – Button when adjusting the Turbo Speed on (L).Please use the TURBO Button (R) and the + Button when adjusting the Turbo Speed on (R).
How to change Turbo Speed
Turbo mode can be set to 3 different speeds.
-
Please use the TURBO Button (L) and the Left Stick when adjusting the Turbo Speed on (L).Please use the TURBO Button (R) and the Right Stick when adjusting the Turbo Speed on (R).
-
When setting Turbo speed, Turbo LED (green) will fllash at a rate corresponding to the set Turbo speed.
-
Turbo speed is set to 10 times/second by default.
-
Analog Sticks must be returned to the neutral position before changing to the next turbo speed.
Caution
Parents/Guardians: Please read the following information carefully.
-
This product contains small parts. Keep away from children under 3 years old.
-
Keep this product away from small children or infants. Seek medical attention immediately if any small parts are swallowed.
-
Keep the product away from dusty or humid areas.
-
Do not use this product if it has been damaged or modified.
-
Do not get this product wet. This may cause an electric shock or malfunction.
-
Do not place this product near heat sources or leave under direct sunlight for an extended period. Overheating may cause malfunction.
-
Do not apply strong impact or weight on the product.
-
Do not disassemble, modify or attempt to repair this product.
-
If product needs cleaning, use only a soft dry cloth.
Do not use any chemical agents like benzene or thinner. -
Do not use this product for anything other than its intended purpose.
We are not responsible for any accidents or damages in the event of use other than the intended purpose.
Main Features
External Dimensions：2.5in x 5.5 in x 1.6 in
Weight：L approx 2.5 oz, R approx 2.5 oz
Connection method ：Rail connector (* This product is not wireless)
The packaging must be retained since it contains important information.
PRODUCT DISPOSAL INFORMATION
Where you see this symbol on any of our electrical products or packaging, it indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose of them in accordance with any applicable local laws or requirements for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste. Applicable to EU countries and Turkey only.
**** EU and Turkey only
THE FCC WANTS YOU TO KNOW
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Simplified Declaration of Conformity
Hereby, HORI declares that this product is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://hori.co.uk/consumer-information/
For UK: Hereby, HORI declares that this product is in compliance with the
relevant statutory requirements.
The full text of the declaration of conformity is available at the following
internet address: https://hori.co.uk/consumer-information/
US
Warranty
HORI warrants to the original purchaser that the product purchased new in its
original packaging shall be free of any defects in material and workmanship
for a period of 1 year from the original date of purchase. If the warranty
claim cannot be processed through the original retailer please contact HORI
customer support directly at info@horiusa.com.
Please visit http://stores.horiusa.com/policies/ for warranty details.
EU
Warranty
For all warranty claims made within the first 30 days after purchase, please
check with the retailer where the original purchase was made for details. If
the warranty claim cannot be processed through the original retailer or for
any other inquiries pertaining to our products, please contact HORI customer
support directly at info@horiuk.com.
This is not a wireless controller.
Can only be used in portable mode.
Does not have the following functions.
Gameplay that require the following features may not work as desired with the
Split Pad Compact.
- gyro sensors
- accelerometer
- motion sensors
- player LED
- HD rumble
- notification light
- NFC touchpoint
The image on the package may differ from the actual product.
The manufacturer reserves the right to change the product design or
specifications without notice.
HORI and HORI logo are registered trademarks of HORI.
Nintendo Switch™ is a trademark of Nintendo. © 2022 Nintendo.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>