Mojia A5 Car Wireless Charger Instruction Manual
- June 16, 2024
- Mojia
Table of Contents
Car Wireless Charger Instruction Manual
Car Wireless Charger Manual
Product Name: Car stand wireless charger (Intelligent sensing)
Power: 15W, 10W, 7.5W,5W
Effective transmission distance: 1-6mm
Product Size: 100.880.9549.4mm
Charging interface: USB TYPE-C
Packing list:
Car bracket x 1, Manual X1, Data linex1, Car outlet base(clip)x1
Functional components
Specifications
-
Model: A5
-
Material: PC/ABS vacuum plating
-
Wireless charging input: 5V/3A, 9V/2A
-
Wireless charging output: 15W, 10W, 7.5W, 5W automatic recognition
-
Charging power: 115K-205KHz
-
Charging distance: 0-6mm
-
Support specifications: Compliant with QI wireless protocol charging (including but not limited to the following mobile phones)
-
Devices that support QC wireless fast charging, such as iPhone 8, iPhone 8+, iPhone X, iPhone 10, iPhone 11 series, iPhone 12, iPhone 13 series, iPhone 14 series, iPhone 15 series; Huawei P30pro, P40 Pro, Mate20 series, Mate30 series, Mate40 series, Mate50 series, Mate60 series; Samsung S6, s6edge, s7, sedge, s8, s8tand other phones with built-in wireless charging function.
Standard charging mode: compatible with all QI activated devices -
Executive standard: GB 4943.1-2022
Instructions For Use
-
Connect the car wireless charging device to the appropriate data cable when using.
-
Connect the USB port of the data cable to the power interface of the car (Such as: cigarette lighter conversion charger or use support QC3.0 car charger head, use without Fast charging car charger head, there may be other problems such as slow mobile phone charging)
-
The device can be clamped at the air conditioner outlet blade or other snap-on positions
-
After 5-9V DC power is connected to the device, LOGO atmosphere lights up and automatically checks and closes Reset once the left and right clamping arms are folded, and the sound pickup blinks after the device’s sound indicator turns on one by one.
Touch the top sensor or press the orange mechanical switch in the lower right corner of the back and clamp the arms left and right
After opening, extending the foot support downward and placing it in the phone, the device automatically charges wirelessly according to the phone
Lock the module position, touch the top sensor again or press the orange on the lower right corner of the back
Mechanical switch, the device automatically open both sides of the clamp arm, take out the phone. -
The device has over voltage protection, over temperature protection, magnetic field protection, short circuit protection
If the device is abnormal, it automatically stops working. -
The host device has a built-in battery, and the support is electric when the power data cable is not connected Open and close tightening works normally (wireless charging function can not be used without connected power), touch Sensing at the top or press the orange mechanical switch at the lower right corner of the back to open the clamping arm and wake up LOGO atmosphere lights up for 5 seconds and turns off automatically.
-
The sound pickup light function —- is turned on by default after being connected to the power supply. The beating of the light effect will follow the surrounding area The ambient sound beats depending on the size, and long press the mechanical button on the back to turn off or on the control Pickup light.
Precautions
- Do not over-squeeze or hit the device
- Do not use the wireless charger under severe high temperature, humidity or corrosive environment to avoid damaging the device’s circuit
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.