Mojia A1 Car Wireless Charger Instruction Manual

Mojia A1 Car Wireless Charger

INSTRUCTION MANUAL

MODEL: A1

1.Car Wireless Charger Manual

• Product Name: Car stand wireless charger (1Melli9Mtsensing)
• Power: lSW, lOW, 7.SW, SW
• Effective transmission distance: 1-8cm
• Size: Middle disk diameter: 12 .88cm x 7. 7 Scm xl. 78cm
• Charging interface:USB TYPE-C

Packing list:

• Car bracketx 1,
• Manual Xl,
• Data linexl,
• Car outlet base(clip)xl

2.Functional components

3. Specifications

1. Model : Al

2. Weight:118.5g

3. Material: ABS+PC Vacuum plating

4. Input voltage/current: 5V/2A, 9V/1.67A

5. Output power: 15W, 10W, 7.5W, 5W automatic identification

6. Charging power: 110K-205K Hz

7. Charging distance: 0-8mm

8. Support Specifications: Qualified with QI Wireless Protocol Charging

9. Support QC wireless fast charging equipment such as HUAWEI Mate 30/Mate 20 /Mate RS ;phone 12 /iphone 12 Pro/iphone 12mini/iphone 12 Pro Max/iphone 11/iphone 11 proAphone x.Sliphone XS Max/iPhone )(MO.’ Re Plus/iphone8/SAAMSUNG Gala, Notel 0+5G/Notel 0/ Note9/Note8/510+/510/59+59/58+ Wireless charging

10. Devices that do not support wireless charging need to pirchase QI- compliant wireless receivers before they can be used

4. Instructions For Use

1. CONNECT THE VEHICLE WIRELESS CHARGING DEVICE TO THE APPROPITE DEVICE.

2. Connect the USB port of the data cable to the charging interface on the carleg, cigarette lighter switching charger and USB charging port on the car

3. The device clip clips the air outlet and can also be placed
4. After the device is connected to the 5-9V DC power supply, it will automatically check and reset once, and the blue indicator light will illuminate. When the object is close to the device 5cm-20cm, the automatic induction will open its arms and put it into the mobile phone, the device will automatically clamp the mobile phone . At this time, the wireless charger will automatically charge the mobile phone, and the green light will be on when charging (mobile phones with wireless charging function). When removing the mobile phone, you need to touch the sensing point raised on the top of the rear case. When the hand touches this sensing point, the device will automatically open the double Arm, take out the phone

5. This device has over-voltage protection, over-temperature protection, magnetic field protection, short-circuit protection if the device is abnormal, it will automatically stop working

5. Operating instructions for coil adjustment gear

1. The gear position is 1 gear by default. When the coil position needs to be adjusted, press the upper right side button to adjust the gear position and push up to gear 2 or 3. When the gear is in gear 3, it needs to be adjusted to gear 1 or In 2 gears, press the side button to push down one gear.
2. The coil adjustment gear is mainly to accurately adjust the coil position corresponding to the shape and size of each mobile phone with wireless charging, so that the wireless charging efficiency conversion effect is better, and the charging is faster
3. Take the iphone series mobile phones as an example. For example: iphone8/iphone12mini is 4.7 /5.4 inches corresponding to gear 1; iphone12/iphone12pro is 6.1 inches corresponding to 2 gears; iphone 12pro Max is 6.7 inches corresponding to gear 3

6.Precautions

1. Do not over-squeeze or hit the device
2. Do not use the wireless charger under severe high temperature,humidity or corrosive environment to avoid damaging the device’s circuit

Specifications

• Model: FCC-1234

• Compliance: Part 15 of FCC Rules

• Antenna Separation: 20 cm from all persons

Frequently Asked Questions (FAQ)

Q: What should I do if I experience interference?

A: If you encounter interference, try reorienting the antenna, increasing separation, or consult a professional for assistance.

Q: Can I install the antennas closer than 20 cm to persons?

A: To ensure safety and compliance, maintain a separation distance of at least 20 cm from all individuals.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>