WAVESHARE 15.6inch HDMI LCD with Case Type H User Manual

WAVESHARE 15.6inch HDMI LCD with Case Type H

Product Information

Specifications

• Size: 15.6 inches
• Resolution: 1920 x 1080
• Display Port: IPS
• Viewing Angle: Wide
• Touch Type: Capacitive
• Touch Points: 10
• Audio Output: Sound through 3.5mm Jack or HDMI
• OSD Menu: Multi-languages for power management, brightness/contrast adjustment, etc.
• Touch Port : Micro USB
• Touch   Panel: Toughened glass with 6H hardness
• Gaming Certification: Xbox360/PS4/Switch CE
• Enclosure: Polycarbonate

Product Usage Instructions

Power Connection:
The 15.6-inch HDMI LCD (H) requires power from two interfaces:

1. POWER Port: Connect a 12V/1A power adapter to this interface. The operating current for this interface is approximately 12V/0.6A.
2. TOUCH Interface: Connect this interface to the USB interface of the master device. The operating current for this interface is approximately 5V/80mA.

Installation and Usage:
Please observe the following rules during installation and usage to avoid damage to the display:

1. To prevent fire or electric shock, do not expose the display to high humidity or extreme conditions.
2. Avoid placing the display in damp areas and ensure it is placed on a stable surface during use.
3. Avoid inserting any objects or splashing liquids into the ports or openings of the display.
4. Ensure all cables, including the power cord, are properly connected before using the display. If any cables or accessories are missing or broken, please contact Waves are immediately.
5. Use the provided HDMI cable and USB cable for optimal performance.
6. Do not attempt to disassemble the PCBA and raw display panel, as it may damage the display. If you encounter any issues, please contact our Support Team.
7. Handle the display with care to avoid dropping or bumping it on hard surfaces, as this may cause the display glass to break.

FAQ

1. Q: How to disable the rainbow screen of Raspberry Pi?
   A: Please add the following command to /boot/config.txt file: disable_splash=1

2. `**Q: How to change the splash screen of Raspberry Pi?** A: You can replace thesplash.pngfile located at /usr/share/plymouth/themes/pix/splash.png` with your own image.

3. Q: What is the operating current of the 15.6-inch HDMI LCD (H)?
   A: This LCD requires power from two interfaces. The POWER port operates at approximately 12V/0.6A, and the TOUCH interface operates at approximately 5V/80mA.

15.6INCH HDMI LCD (H) (WITH CASE) User Manual

The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.” OR “The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

FAQ

1. Q: How to disable the rainbow screen of Raspberry Pi?
   A: Please add the following command to /boot/config.txt file. disable_splash=1

2. Q: How to change the splash screen of Raspberry Pi?
   A: You can replace the splash.png from the path /usr/share/plymouth/themes/pix/splash.png to yours.

3. Q: What is the operating current of 15.6inch HDMI LCD H?
   A: This LCD get power from two interfaces. One is the POWER port, you should connect an 12V/1A power adapter to this interface, the operating current of this interface is about 12V/0.6A. And the other one is the TOUCH interface. You need to connect this interface to the USB interface of master, its operating current is about 5V/80mA .

WARNING
Please read this user manual carefully before you use the display. Incorrect use may cause irreparable damage or even cause electric shock and fire. To avoid damaging the display, please observe the following rules during the installation and using.

1. To prevent from fire disaster or electronic shock, please do not put the display in humidity or even in a worse condition;
2. To avoid dust, moisture and extreme temperatures, please DO NOT please the display in any damp area. Please place the device on a stable surface when in use;
3. DO NOT put any object or splash any liquid into the ports of openings of the display;
4. Before using the display, please make sure all the cables are connected properly and all the cables included the power cord are proper to use. If any cables or accessories are missed or broken, please contact Waveshare immediately;
5. Please use the HDMI cable as well as the USB cable provided with the display;
6. DO NOT attempt to take apart the PCBA and the raw display panel, which may damage the display panel. If you face any problem about the display, please contact our Support Team by ticket;
7.  The display glass may break when it is dropped or bumped on a hard surface, please handle with care.

SPECIFICATION

• 15.6inch IPS screen,1920 x 1080 high resolution.
• Toughened glass capacitive touch panel, 6H hardness, 10-points capacitive touch control.
• When used with Raspberry Pi, supports Raspberry Pi OS / Ubuntu / Kali and Retropie.
• When used as a computer monitor, supports Windows 11/10/8.1/8/7.
• Multi-languages OSD menu, for power management, bright-ness/contrast adjustment, etc.
• 3.5mm audio jack, supports HDMI audio output.

ACCESSORIES

Before using the product, please check if all the accessories are packaged properly and in perfect condition

INTERFACES

1. Exit Button
   Return or exit from menu

2. Down/Right Button Direction button

3. Up/Left Button Direction button

4. Menu Button
   Open OSD Menu or “OK “ button

5. Power Button
   Turn on/
   off power of backlight

6. HP
   3.5mm jack for HDMI audio

7. VGA Display
   Mini HDMI connector for VGA signal

8. HDMI Display
   Standard HDMI connect-or for HDMI signal

9. Touch Port
   Micro USB port for touch

10. Power Supply
    DC port for 12V power input

DISPLAY SETTING

To use with the Raspberry Pi, you need to manually set the resolution by modifying the config.txt file, The file is located at the boot directory. Some of the OS doesn’t have config.txt file by default, you can create an empty file and name it as con-fig.txt.

1. Write Raspberry Pi OS image to the TF card by Raspberry Pi Imager which can be downloaded from Raspberry Pi official website.
2. Open the config.txt file and add the following lines to the end of the file.
   • hdmi_group=2
   • hdmi_mode=82
   • hdmi_cvt 1920 1080 60 6 0 0 0
3. Save the file and eject the TF card.
4. Insert the TF card into the Raspberry Pi board.

CONNECTION

Connect to Raspberry Pi Zero W

• Connect to Raspberry Pi 4
• Connect to Jetson nano
• Connect to mini PC

Note: You need to config the Raspberry Pi ac-cording to Display Setting before powering the board.

1. Connect HDMI cable：
   For Pi 4: Connect the micro HDMI adapter to Raspberry Pi 4, then connect standard HDMI cable to Pi 4 and the display.
   For Pi zero : Connect the mini HDMI adapter to the Pi zero, then connect standard HDMI cable to Raspberry Pi Zero and the display (The mini HDMI adapter should be purchased separately).

2. Connect the USB cable to the Raspberry Pi and the display.

3. Connect the 12V/1A power adapter to the DC jack of the display.

4.  Connect a power adapter to the Raspberry Pi to power on.

Note: For Jetson Nano, the display is driver free without other setting.

1. Connect standard HDMI cable to Jetson Nano and the display.
2. Connect the USB cable to the Jetson Nano and the display.
3. Connect 12/1A power adapter to the DC interface of LCD, after connecting the backlight will light.
4. Connect a power adapter to the Jetson nano to power on.

Note: For most of the PC, the display is driver free without other setting.

1. Connect the HDMI cable to PC and display.
2. Connect the USB cable to PC and display.
3. Connect 12/1A power adapter to the DC interface of LCD, after connecting the back-light will light.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>