WAVESHARE 5inch 1080×1080 LCD HDMI Capacitive Touch Screen User Manual

: June 2, 2024
: WAVESHARE

Table of Contents

WAVESHARE 5inch 1080×1080 LCD HDMI Capacitive Touch Screen
Product Information
Product Usage Instructions
Feature
Specification
Electrical Specifications
EDID Sequence Parameters
Onboard Interface
Working with Raspberry Pi
Software Setting
Working with PC
Windows Touch Calibration
Outline Dimensions
Resource
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WAVESHARE 5inch 1080×1080 LCD HDMI Capacitive Touch Screen

WAVESHARE-5inch-1080x1080-LCD-HDMI-Capacitive-Touch-Screen-product-
image

Specifications :

Item	Description	Unit
Model	5inch 1080 x 1080 LCD	/
Dimensions	5.0 Inch	/

Product Information

The 5-inch IPS round screen features a hardware resolution of 1080 x 1080. It has a 10-point capacitive touch with toughened glass panel and supports various operating systems like Raspberry Pi OS, Ubuntu, Kali, and Retropie when used with Raspberry Pi.

Product Usage Instructions

Working with Raspberry Pi:
Hardware Connection:

Connect the touch port of the LCD to the USB interface of the Raspberry Pi.
Connect the HDMI port of the LCD to the HDMI port of the Raspberry Pi.

Software Setting:
Ensure the resolution is manually set for proper display:

hdmi_group=2
hdmi_mode=87
hdmi_pixel_freq_limit=356000000
hdmi_timings=1080 0 68 32 100 1080 0 12 4 16 0 0 0 60 0 85500000 0

User Guide:
Follow the Raspberry Pi remote login tutorial for power-on setup due to the circular screen feature.

Working with PC:

How to Use:

Connect the touch port of the LCD to the USB port of the PC.
Connect the HDMI port of the LCD to the HDMI port of the PC.

Windows Touch Calibration:
Calibrate the screen for pen or touch input in Windows settings.

FAQ :

Q: What operating systems are supported by the LCD?
A: The LCD supports Raspberry Pi OS, Ubuntu, Kali, Retropie, and various Windows versions such as Windows 11/10/8.1/8/7.
Q: How can I prevent incorrect display resolution when using Raspberry Pi?
A: Ensure to manually set the resolution when using Raspberry Pi to avoid incorrect display resolution.

5inch 1080×1080 LCD

Feature

5-inch IPS round screen, 1080 x 1080 hardware resolution.
10-point capacitive touch, with toughened glass panel, hardness up to 6H.
Adopting optical bonding technology, the display effect is better.
Supports Raspberry Pi OS / Ubuntu / Kali and Retropie when used with Raspberry Pi.
Supports Windows 11 / 10 / 8.1 / 8 / 7 when used as a computer monitor.
Supports HDMI audio output with 3.5mm jack and 4PIN header.

$WAVESHARE-5inch-1080x1080-LCD-HDMI-Capacitive-Touch-Screen-fig- $1$$

Specification

Item	Description	Unit
Model	5inch 1080 x 1080 LCD	/
Dimensions	5.0	Inch
Viewing Angle	160	Deg
Resolution	1080 x 1080	Pixels
Overall Size	150.00(H) × 150.00(V) × 7.00(D)	mm
Display Area	127.60(H) × 127.60(V)	mm
Pixel Pitch	0.1176(H) x 0.1176(V)	mm
Color Gamut	70%	NTSC
Maximum Brightness	300	cd/m²
Contrast	1300:1	/
Backlight Adjustment	Button dimming	/
Refresh Rate	60	Hz
Display Interface	Standard HDMI port	/
Power Port	5V Type-C power supply	/
Power Consumption	2	Watt
Weight	381	g

Electrical Specifications

Parameter Minimum| Standard| Maximum| Unit| Note
---|---|---|---|---
Input Voltage| 4.75| 5.00| 5.25| V| Note 1
Input Current| 300| 400| TBD| mA| Note 2
Operating Temperature| 0| 25| 60| ℃| Note 4
Storage Temperature| -10| 25| 70| ℃| Note 4

Note 1: Input voltage exceeding the maximum value or improper operation may cause permanent damage to the device.
Note 2: The input current must be ≥300mA, otherwise, it will cause booting failure or abnormal display, and it may cause permanent damage to the device if it is in an abnormal state for a long time.
Note 3: Please do not store the display in a high-temperature and high-humidity environment for a long time.
The display must work within the limited value range, otherwise, it may be damaged.

EDID Sequence Parameters

If the system of the main control board can automatically recognize the EDID for display, there is no need to additionally set related timing parameters.

Otherwise, you can refer to the following EDID settings:

Pixel H Clock Addressable| H
Blanking| V
Addressable| V
Blanking| H
Front Porch| H
Sync Width| V
Front Porch| V
Sync Width| H
Image Size| V
Image Size| H
Border| V
Border
---|---|---|---|---|---|---|---|---|---|---|---
85.50| 1080| 200| 1080| 32| 68| 32| 16| 4| 203| 270| 0| 0

Onboard Interface

1 Backlight ON/OFF
Earphone Jack
HDMI Port
Power Input
Touch Port
Speaker Header

①Key function: short press to turn on/off the backlight, long press to adjust the backlight brightness.

Working with Raspberry Pi

Hardware Connection

Connect the touch port of the LCD to the USB interface of the Raspberry Pi.
Connect the HDMI port of the LCD to the HDMI port of the Raspberry Pi. $WAVESHARE-5inch-1080x1080-LCD-HDMI-Capacitive-Touch-Screen-fig- $3$$

Software Setting

Raspberry Pi OS / Ubuntu / Kali and Retropie systems are supported.
When the LCD works on systems such as Raspberry Pi, the resolution must be manually set, otherwise, it will cause incorrect display resolution and affect the experience.

Please download the newest image from Raspberry Pi official website .
Download the compressed file to the PC and decompress it to get the .img file.
Connect the TF card to the PC, and use SDFormatter to format the TF card.
Open the Win32DiskImager software, select the system image prepared in step 1, and click write to burn the system image.
After the programming is completed, open the config.txt file in the root directory of the TF card, add the following code at the end of config.txt, save and eject the TF card safely. $WAVESHARE-5inch-1080x1080-LCD-HDMI-Capacitive-Touch-Screen-fig- $4$$
Insert the TF card into the Raspberry Pi, power on the Raspberry Pi, and wait for a few seconds for a normal display.

Due to the circular screen feature, it is recommended to use the Raspberry Pi remote login tutorial for power on setup.

Working with PC

Support Windows 11/10/8.1/8/7

How to Use

Connect the touch port of the LCD to the USB port of the PC, and Windows will automatically identify the touch function.
Connect the HDMI port of the LCD to the HDMI port of the PC, and Windows will automatically identify the display function.

Note:

Some PCs do not support the plug-and-play function of HDMI devices, and it can be normal after rebooting the system.
If there is no sufficient power for the USB port, the LCD screen may flash. After connecting the 5V 1A power adapter to the Power port of the LCD, it can be normally used.

Windows Touch Calibration

Take Windows 10 as an example:

Enter the Windows settings of the system, type in the search bar and click “Calibrate the screen for pen or touch input” (as shown in the picture below):
Windows settings $WAVESHARE-5inch-1080x1080-LCD-HDMI-Capacitive-Touch- Screen-fig- $5$$
Click “Setup” in the pop-up “Tablet PC Settings” interface:
The following text prompt will appear on the screen. Please tap the touch screen with your finger, and the computer will recognize it as a touch screen.
【Note】If the touch screen is blank, press the “Enter” key, and the text prompt will switch to the touch screen. (The screen which displays the text prompt will be used as a touch screen!)