samtec GPSO SERIES Board To Board Post Standoff Installation Guide
- June 16, 2024
- samtec
Table of Contents
samtec GPSO SERIES Board To Board Post Standoff
SPECIFICATIONS
Locking Compound: Nylon
-
GPSO
-
BOARD STACK HEIGHT
Specify BOARD STACK HEIGHT from chart -
LEAD STYLE
- = Press-In
- = Press-In with Nut
-
MATERIAL
- = 303 Stainless Steel with MIL-C-13924 black oxide finish
-
KIT OPTION
–N = No hardware (Standoff only) Leave blank for kit
| BOARD STACK HEIGHT | A | B | C |
|---|---|---|---|
| –0500 | (5.00) .197 | (4.15) .163 | (4.65) .183 |
| –0515 | (5.15) .203 | (4.30) .169 | (4.80) .189 |
| –0700 | (7.00) .276 | (6.15) .242 | (6.65) .262 |
| –0715 | (7.15) .281 | (6.30) .248 | (6.80) .268 |
| –0865 | (8.65) .341 | (7.80) .307 | (8.30) .327 |
| –0900 | (9.00) .354 | ( 8.15) .321 | (8.65) .341 |
| –0915 | (9.15) .360 | (8.30) .327 | (8.80) .346 |
| –1000 | (10.00) .394 | (9.15) .360 | (9.65) .380 |
| –1015 | (10.15) .400 | (9.30) .366 | (9.80) .386 |
| –1115 | (11.15) .439 | (10.30) .406 | (10.80) .425 |
| –1200 | (12.00) .472 | (11.15) .439 | (11.65) .459 |
| –1215 | (12.15) .478 | (11.30) .445 | (11.80) .465 |
| –1315 | (13.15) .518 | (12.30) .484 | (12.80) .504 |
| –1415 | (14.15) .557 | (13.30) .524 | (13.80) .543 |
| –1515 | (15.15) .596 | (14.30) .563 | (14.80) .583 |
| –1524 | (15.24) .600 | (14.39) .567 | (14.89) .586 |
| –1615 | (16.15) .636 | (15.30) .602 | (15.80) .622 |
Notes:
Standoffs to be used with (1.57 mm) .062″ min thick boards. Threaded options
PCB max thickness of (3.16 mm) .124″.
Standoffs are designed, 0.15 mm longer than fully mated connector stack height to allow for processing variables.
Some sizes, styles and options are non-standard, non-returnable.
DIMENSION
-
LEAD STYLE
-
LEAD STYLE
Components are to be packaged in separate bags unassembled.
APPLICATIONS
-
GPSO mated with ADX6
-
GPSO mated with UMPX
Allows for 0.035″ of initial misalignment -
Alignment starts before connectors engage.
CUSTOMERS SUPPORT
samtec.com ?GPSO
F-221 (Rev 28JUL21)
Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec’s specifications which are subject to change without notice.
Downloaded from Arrow.com.