ASSETS ATU67061939 mySugr Pump Control User Manual Product Information Product Usage Instructions

: January 9, 2024
: ASSETS

ATU67061939 mySugr Pump Control

Product Information

Specifications

Product Name: mySugr Pump Control
Version: 1.0.30_Android – 2023-10-13

Indications for Use

1.1 Intended Use

The mySugr Pump Control software is intended to be used as an
aid in diabetes therapy. It is designed to remotely control a
compatible insulin pump used by people with diabetes. The software
uses wireless communication to communicate with connected pumps,
read data, make changes to the pump’s settings, and manage insulin
delivery based on user input.

1.2 Who is the mySugr pump control for?

The mySugr Pump Control is designed for users who:

Have been diagnosed with insulin-dependent diabetes
Are aged 18 years and above
Are undergoing insulin pump therapy
Have been trained on their insulin pump under the guidance of a
doctor or other healthcare professional
Are physically and mentally able to independently manage their
diabetes therapy
Are able to proficiently use a smartphone

1.3 Environment for Use

As a mobile application, mySugr Pump Control can be used in any
environment where you would typically and safely use a
smartphone.

Contraindications

For mySugr Pump Control as a Software product, there are no
specific contraindications. However, the contraindications stated
in the instructions for use of the connected insulin pump
apply.

Warnings

3.1 Medical Advice

The mySugr Pump Control is used to support the treatment of
diabetes, but it cannot replace regular visits to a doctor/diabetes
care team. Professional and regular review of long-term blood
glucose values (HbA1c) is still required. Users are responsible for
continued self-management of blood glucose, independent of the use
of the mySugr Pump Control.

3.2 Inputting the correct data

The mySugr Pump Control depends on the accuracy of the
information entered. Users are always responsible for verifying
settings and insulin doses. Incorrect information may lead to
severe worsening of health and even death.

3.3 Recommended Updates

To ensure safe and optimized running of mySugr Pump Control, it
is recommended that users install software updates as soon as they
are available.

3.4 Glucose Monitoring

Monitoring of glucose results should be conducted using a
glucose monitoring device that is compatible with insulin pump
therapy. Users can manually input data or import data via Bluetooth
functionality.

3.5 Smartphone Security and Maintenance

To enhance security when using mySugr Pump Control and to ensure
that users are the only ones with access, it is required to have an
authentication method (unlock mechanism) installed on the
smartphone. Users should choose a strong password or other strong
authentication method and not share their password with
unauthorized parties. Only trusted applications should have
permission to system services, such as Android Accessibility
Services. Users should not use the application on a smartphone with
a cracked or damaged screen to ensure correct usability.
Additionally, the application should not be used on smartphones
that are rooted or have a Jailbreak installed to ensure integrity
and security.

Product Usage Instructions

Installation and Setup

Download and install the mySugr Pump Control application from
the Google Play Store.
Open the application and follow the on-screen instructions to
create an account or log in with your existing account.
Pair the application with your compatible insulin pump
following the manufacturer’s instructions.
Once paired, you can start using the mySugr Pump Control to
remotely control your insulin pump and manage your diabetes
therapy.

Using mySugr Pump Control

Open the mySugr Pump Control application on your
smartphone.
Ensure that your smartphone is connected to your insulin pump
via wireless communication.
On the application interface, you can view and manage various
settings of your insulin pump, such as basal rates, bolus doses,
and alarms.
To make changes to the pump’s settings, select the desired
setting and follow the on-screen prompts.
To manage insulin delivery based on your input, enter your
blood glucose readings and other relevant information into the
application.
The application will analyze the data and recommend insulin
doses accordingly. Review and verify the recommended doses before
confirming.
Regularly monitor your glucose levels using a compatible
glucose monitoring device and input the results into the
application for accurate insulin delivery management.
Ensure that you update the mySugr Pump Control application
whenever software updates are available to ensure safe and optimal
performance.

FAQ

Q: Can I use mySugr Pump Control if I have type 2

diabetes?

A: No, mySugr Pump Control is specifically designed for users
diagnosed with insulin-dependent diabetes.

Q: Can I use mySugr Pump Control without an insulin pump?

A: No, mySugr Pump Control requires a compatible insulin pump
for remote control and management of insulin delivery.

Q: How often should I update the mySugr Pump Control

application?

A: It is recommended to install software updates as soon as they
are available to ensure safe and optimized running of the
application.

Q: Can I use mySugr Pump Control on a smartphone with a cracked

screen?

A: No, it is advised not to use the application on a smartphone
with a cracked or damaged screen to ensure correct usability.

Q: Can I use mySugr Pump Control on a rooted or Jailbroken

smartphone?

A: No, it is recommended not to use the application on
smartphones that are rooted or have a Jailbreak installed to ensure
integrity and security.

mySugr Pump Control User Manual
Version: 1.0.30_Android – 2023-10-13
1 Indications for Use
1.1 Intended Use
The mySugr Pump Control software is intended to be used as an aid in diabetes therapy. It is intended to remotely control a compatible insulin pump used by people with diabetes. The mySugr Pump Control software uses wireless communication to communicate with connected pumps, to read data, make changes to the pump’s settings, and to manage insulin delivery based on your input.
1.2 Who is the mySugr pump control for?
mySugr Pump Control is designed for users:
diagnosed with insulin-dependent diabetes aged 18 years and above undergoing insulin pump therapy who have been trained on their insulin pump under the guidance of a doctor or other healthcare professional who are physically and mentally able to independently manage their diabetes therapy who are able to proficiently use a smartphone
1.3 Environment for Use
As a mobile application, mySugr Pump Control can be used in any environment where you would typically and safely use a smartphone.
2 Contraindications
For mySugr Pump Control as a Software product there are no specific Contraindications, however the Contraindications stated in the instructions for use of the connected insulin pump apply.
3 Warnings
3.1 Medical Advice
The mySugr Pump Control is used to support the treatment of diabetes, however it cannot replace regular visits to a doctor/diabetes care team. You still require professional and regular review of long-term blood glucose values (HbA1c). You are responsible for continued self-management of blood
1

glucose, independent of the use of the mySugr Pump Control.
3.2 Inputting the correct data
The mySugr Pump Control depends on the accuracy of the information entered. You are always responsible for verifying settings and insulin doses. If incorrect information is used for administering insulin doses, there is a risk of severe worsening of your health and even death.
3.3 Recommended Updates
To ensure safe and optimized running of mySugr Pump Control, it is recommended that you install software updates as soon as they are available.
3.4 Glucose monitoring
Monitoring of glucose results should be conducted using a glucose monitoring device that is compatible with insulin pump therapy. You can manually input data or import data via bluetooth functionality.
3.5 Smartphone security and maintenance
To enhance security when using mySugr Pump Control and to ensure that you are the only one with access, it is required that you have an authentication method (unlock mechanism) installed on your smartphone. Only choose a strong password or other strong authentication method and do not share your password with unauthorized parties.
Allow only trusted applications to have permission to system services, such as Android Accessibility Services.
To ensure correct usability of the mySugr Pump Control, do not use the application on a smartphone with a cracked or damaged screen.
To ensure integrity and security of the mySugr Pump Control, do not use the application on smartphones that are rooted or smartphones that have a Jailbreak installed.
3.6 Potential malicious messages
mySugr will never send you instructions relating to insulin delivery or pump control outside of the mySugr app. If you feel unsure about any message you have received, contact mySugr customer support.
4 Installation
The mySugr Pump Control is an extension of the mySugr Logbook (mySugr app). Just download the mySugr app from the Google Play Store. For more detailed instructions on
2

installation and usage of the mySugr app, please check out the mySugr app user manual.
5 Connecting and disconnecting your pump
5.1 A few things to know before connecting your pump
If a remote control, e.g., an Accu-Chek Insight diabetes manager, is connected to your pump, disconnect it first. To keep you safe, your pump cannot be connected to the mySugr app and to a remote control at the same time.
5.2 Connecting your pump
To connect your pump with the mySugr app turn on Bluetooth on your smartphone. In the mySugr app, select “Connections” from the side menu in the upper left corner. Select your pump, e.g., “Accu-Chek Insight”, from the list. Tap “Connect”. Then, follow the instructions on the mySugr app. After you have connected your pump, go back to the mySugr app home screen, where the “My pump” widget is displayed.
5.3 Disconnecting your pump
To disconnect your pump, select “Connections” from the side menu in the upper left corner. Select your pump from the list. Tap “Disconnect”. Tap “Confirm”. The “My pump” widget disappears from the mySugr app home screen.
6 My pump widget
The “My pump” widget on the home screen is the starting point for controlling your pump using the mySugr app.
The widget also displays the last time there was a connection to the pump and when pump data was imported into the mySugr app (1).
Tap on “Control pump” (2) to access the “My pump” home screen.
7 My pump home screen 3

On the “My pump” home screen, you can:
Check the insulin (1) and battery (2) status Find out if your pump is running, paused or stopped Deliver a bolus (3) Check (4) or cancel (5) an ongoing bolus See the last delivered bolus

The icons for the di erent bolus types look like this (from left to right: standard, extended, multiwave):
The icons for the insulin and battery status are colored in gray. If the insulin level or battery status is low, only the respective icon turns orange. If the insulin or the battery is almost empty, the icon is colored in red (see below).
Insulin icons:
Battery icons:
8 Delivering a bolus
For now, you can only deliver a standard bolus. No extended or multiwave boluses can be delivered.
To deliver a bolus, tap on the “+” icon in the bottom right corner of the mySugr app home screen and then select “Deliver bolus”. Alternatively tap on “Control pump” on the “My pump” widget. Once you’re on the “My pump” home screen, tap on “Deliver bolus”.
IMPORTANT: In case you have not set up an unlock mechanism on your smartphone yet, you will be asked to do so. This is crucial so that only you and no one else can control your pump with your smartphone. Tap on “Open phone settings” and set up your preferred option, e.g. your fingerprint. Afterwards go back from the phone settings to the mySugr app.

Enter the insulin amount and tap “Confirm”. You must

4

Enter the insulin amount and tap “Confirm”. You must authorize the bolus delivery. To do so, tap “Authorize” and unlock your phone using the unlock mechanism you have set up.
The bolus is sent to the pump and the “Bolus” widget is displayed on the “My pump” home screen. It shows the total bolus amount and the progress of the bolus delivery.
While the bolus is being delivered, it is not possible to deliver another bolus.
To cancel the bolus delivery, tap on “Cancel bolus” on the “Bolus” widget. Once the bolus delivery has been stopped, you can see how much insulin has already been delivered.
While starting or cancelling a bolus, a notification outside of the mySugr app will appear. It will disappear automatically once the connection to the pump was successfully established. A notification will also appear in case there is an error during starting, delivering or cancelling a bolus. Tap on it to check the details within the mySugr app. To be sure that you will be notified, leave the notifications for the mySugr app enabled.
Another way to deliver a bolus is via the mySugr Bolus Calculator. After accepting a bolus recommendation, tap on “Deliver with pump”. Then authorize the bolus delivery according to the instructions above. For more detailed instructions on setup and usage of the mySugr Bolus Calculator, please check out the mySugr Bolus Calculator user manual.
9 Importing data from your pump
9.1 Imported data
Standard boluses, extended boluses, multiwave boluses, temporary basal rates are imported from your pump into the mySugr app.
If the mySugr Bolus Calculator was used to deliver a bolus, the split between correction and food insulin is preserved. Otherwise the boluses are imported as correction insulin, but you can adjust the split in the log entry. Tap on “Separate”, then enter how much of the total amount was food insulin. Depending on what you entered, the amount of correction insulin is updated automatically. Double check and tap “Confirm”.
In case you manually logged a bolus before delivering it with the pump, it is automatically merged with the imported bolus if the bolus amount is very similar and both happened within 15 minutes.
9.2 Data visualisation
You can see the imported data in the list of entries on the 5

You can see the imported data in the list of entries on the home screen of the mySugr app.
For each imported bolus, there is a new entry with the date, time and the number of units delivered. The number of units are shown within a tile as shown below.

Once imported, the bolus entry can neither be edited nor deleted.
10 Error and warning messages
The values in the following messages are only examples. You will see di erent numbers in your message, depending on your personal data.
10.1 During connecting
Oh no, another device is controlling your pump On your pump select: Settings Communication Remove device Remove other controlling devices and try again Try again
Connection lost during pairing Maybe the battery is weak, or your pump is too far away. Please move the pump closer and try connecting it again. Try again
Location services are disabled You need to enable location services to find your device. Once your device is paired, you can disable them again. Enable Location Services
Bluetooth is disabled It seems that Bluetooth got disabled while pairing. You need to have Bluetooth enabled to connect your device. Turn on Bluetooth
Oh no, you connected your pump outside the mySugr app On your phone: please unpair your pump in the Bluetooth settings. On your pump: go to “Settings”, then “Communication” and remove your phone. Once you are ready, please try again. Try again
Oh no, we can’t pair to this pump Unfortunately, this version of the pump doesn’t work with the mySugr app. We would advise to get a newer version. Contact support / Return to Connections

Oh no, the verification code is wrong

6

Oh no, the verification code is wrong Are you sure that you are pairing your own pump? Please try again and double-check the code. Try again
Connection error Oh no! Pairing with your device failed. Please try again or contact support. Contact support / Try again
Bolus authorization failed Try again and complete the bolus authorization successfully.
10.2 When delivering a bolus
The bolus can’t be delivered because it’s outside of the possible range Change the bolus amount so that it’s above the minimum amount of 0.05 U and below the maximum amount set on your pump. Change bolus amount / Cancel
The bolus can’t be delivered because your pump can’t be reached We have tried our best, but still couldn’t reach your pump. Make sure that your pump is nearby, Bluetooth is activated and that the pump’s display is turned o . Try again / Cancel
The bolus can’t be delivered because your pump is stopped To deliver the bolus, start your pump and try again. Try again / Cancel
The bolus can’t be delivered because another bolus is running Only a certain combination of boluses can run at the same time. Wait for one of the boluses to finish, and try again. Try again / Cancel
The bolus can’t be delivered Oh no, something went wrong. To find out more, check your pump. Got it
The bolus delivery can’t be verified To see if the bolus was delivered correctly, check your pump. Got it
A bolus was already delivered a few minutes ago A bolus of 5 U was delivered at 16:17. Are you sure that you want to deliver another bolus of 4 U. Yes, deliver bolus now / Cancel bolus

The bolus can’t be delivered because the

7

The bolus can’t be delivered because the recommendation is not correct anymore We just now connected to your pump and found out that there was a recent bolus that was not considered in the recommendation. To stay safe, recalculate your bolus. Recalculate bolus / Cancel bolus
The calculated bolus can’t be delivered because your blood sugar was measured too long ago The calculated bolus can only be delivered within 15 minutes after you measured your blood sugar. Please measure your blood sugar again. We know that always pricking yourself is really not fun, but let’s do it once more. Measure blood sugar / Cancel bolus
Error when delivering the bolus Check your pump to see if the bolus was delivered. If not, try to deliver the bolus again with the app and follow the progress there.
Still importing pump data… You can deliver your first bolus as soon as all pump data has been imported. This can take a while. Try again in a few minutes. Got it
The bolus can’t be delivered because you didn’t handle an issue in time The bolus delivery was not started because you didn’t react to a previously shown warning or error message within 15 minutes. Try again and make sure your bolus is delivered. Try again / Cancel
10.3 When cancelling a bolus
The bolus can’t be cancelled because your pump can’t be reached Cancel the bolus with your pump. Got it
The bolus has already been cancelled because your pump was stopped The bolus was already cancelled automatically when your pump was stopped and can no longer be cancelled on your phone. Got it
The bolus cancellation can’t be verified To see if the bolus was cancelled correctly, check your pump. Got it
The bolus amount already delivered can’t be displayed8

The bolus amount already delivered can’t be displayed because your pump can’t be reached The bolus was cancelled successfully. However, we don’t know how much was delivered before the cancellation, because we can’t reach your pump. To see how much was delivered, check your pump. Got it
Error when cancelling the bolus Cancel the bolus with your pump.
10.4 Miscellaneous
The pump can’t be reached because your phone’s Bluetooth is turned o To connect to the pump, let’s turn on Bluetooth on your phone. Turn on Bluetooth / Cancel
Be careful while using mySugr Pump Control We’ve noticed that mySugr Pump Control may not work as expected with your phone and/or operating system. Please contact support if you experience a problem. Got it / Ask support
The pump can’t be controlled because notifications are not allowed Please allow notifications to be able to control your pump. Allow notifications / Cancel
The pump can’t be controlled because you didn’t allow notifications Please allow notifications in the phone settings to be able to control your pump. We care about you and want you to stay safe! Open phone settings / Cancel
11 Deinstallation
To deinstall the mySugr app, please check out the mySugr app user manual.
12 Data Security
Your data is safe with us this is very important to us (we’re users of mySugr too). mySugr implements the data security and personal data protection requirements according to the General Data Protection Regulation.
For more information, please refer to our privacy notice within our Terms and Conditions.
13 Troubleshooting and support
13.1 Troubleshooting
We care about you. That’s why we have people with diabetes
9

to take care of your questions, worries and concerns.
For quick troubleshooting, visit our FAQs page
13.2 Support
If you have questions about mySugr, need help with the mySugr Pump Control or the mySugr app, or have noticed a mistake or problem, please contact us immediately at support@mysugr.com.
You can also call us on: + 1 (855) 337-7847 (US toll-free) + 44 800-011-9897 (UK toll-free) + 43 720 884555 (Austria) + 49 32 211 001999 (Germany)
In the event of any serious incidents occurring in relation to usage of this medical device, please contact mySugr customer support and your local competent authority.
14 Supported insulin pumps
mySugr has verified the connectivity of the mySugr Pump Control and the insulin pumps listed below. These insulin pumps can therefore be used in combination with the mySugr Pump Control:
Accu-Chek Insight insulin pump
15 Manufacturer
mySugr GmbH Trattnerhof 1/5 OG A-1010 Vienna, Austria
Telephone: +1 (855) 337-7847 (US toll-free), +44 800-011-9897 (UK toll-free), +43 720 884555 (Austria), +49 32 211 001999 (Germany)
E-Mail: support@mysugr.com
Managing Director: Elisabeth Koelbel Manufacturer Registration Number: FN 376086v Jurisdiction: Commercial Court of Vienna, Austria VAT Number: ATU67061939

2023-10-13

10

2023-10-13 User Manual Version 1.0.30 (en)
11