assets ctfassets UMT-QF-0843 Vendor Revision Control Instructions
- June 16, 2024
- assets ctfassets
Table of Contents
assets ctfassets UMT-QF-0843 Vendor Revision Control
Product Information
Specifications
Vendor Specification Revision Control
- Number: UMT-QF-0843
- Revision: 1.5
- Effective on PO’s issued on or after: 08/25/2023
Instructions
Common specifications may be obtained via the Supplier Portal.
Specifications not available on the portal may be obtained by requesting from
your Buyer or Supplier Engineering contact.
Supplier Portal
- Number: UMT-QP-0841 UMT-QP-0843 UMT-QF-0845 UMT-QF-0870 UMT-QF-0871 UMT0214 UMT0255 UMT2005
Available by Request
- Specification Number: UMT008 UMT010 UMT2014 UMT2016 UMT2017
- Description: Vendor Quality Manual Quality Assurance Provisions (Q-Codes) Vendor Terms and Conditions Vendor Concession-Deviation Permit Form Vendor Disclosure Form Certificate of Destruction Supplier Quality Handbook Vendor Cleaning Requirements Per UMT004
- Revision: 2.2 3.1 4.3 5.0 3.0 Not Released Not Released 1.0
- Revision: 7.0 6.0 1.2 1.2 1.0
Revision History
| Revision | Release Date | Change Record | Changed By |
|---|---|---|---|
| 1.0 | 04/03/2023 | Initial Release | B. Howard |
| 1.1 | 04/07/2023 | Reflect UMT-QP-0843 Rev 3.0 | B. Mills |
| 1.2 | 04/10/2023 | Reflect UMT-QF-0845 Rev 4.3 | B. Mills |
| 1.3 | 04/28/2023 | Reflect UMT-QP-0841 Rev 2.0 & UMT-QP-0843 Rev 3.1 ; removal | |
| of UMT018 & UMT3008 | B. Mills | ||
| 1.4 | 06/19/2023 | Reflect UMT-QP-0841 Rev 2.1, removed Certificate of |
Destruction
and Quality Handbook placeholder lines.| B. Howard
1.5| 08/25/2023| Reflect UMT-QP-0841 Rev 2.2| B. Howard
Product Usage Instructions
Step 1: Obtain Specifications
Before using the product, make sure to obtain the necessary specifications.
Common specifications can be found on the Supplier Portal. If the required
specifications are not available on the portal, contact your Buyer or Supplier
Engineering contact to request them.
Step 2: Review Supplier Portal
Check the Supplier Portal for available information related to the product.
The Supplier Portal contains documents such as UMT-QP-0841, UMT-QP-0843, UMT-
QF-0845, UMT-QF-0870, UMT-QF-0871, UMT0214, UMT0255, and UMT2005.
Step 3: Request Additional Specifications
If the specifications you need are not available on the Supplier Portal,
submit a request to your Buyer or Supplier Engineering contact. Provide the
specification number (e.g., UMT008, UMT010, UMT2014, UMT2016, UMT2017) and
specify the details of the required specifications.
Frequently Asked Questions (FAQ)
-
Q: Where can I find common specifications?
A: Common specifications can be obtained from the Supplier Portal. If they are not available there, contact your Buyer or Supplier Engineering contact. -
Q: How do I request additional specifications?
A: To request additional specifications, reach out to your Buyer or Supplier Engineering contact with the specification number and details of the required specifications.
Vendor Specification Revision Control
UMT-QF-0843
Revision| 1.5
Effective on PO’s issued on or after:| 08/25/2023
INSTRUCTIONS
This document defines revision levels for vendor specifications to be used on Ursa Major Purchase Orders.
- Vendors are required to reference this document upon receipt of any new Ursa Major Purchase Order.
- Purchase orders issued prior to the effectivity date shall be compliant to the previous specification revision.
- It is the vendor’s responsibility to obtain and use the latest revision of specifications as determined by this document.
Common specifications may be obtained via the Supplier Portal. Specifications not available on the portal may be obtained by requesting from your Buyer or Supplier Engineering contact.
S UPPLIER P ORTAL
Number:| Description:| Revision:
UMT-QP-0841| Vendor Quality Manual| 2.2
UMT-QP-0843| Quality Assurance Provisions (Q-Codes)| 3.1
UMT-QF-0845| Vendor Terms and Conditions| 4.3
UMT-QF-0870| Vendor Concession-Deviation Permit Form| 5.0
UMT-QF-0871| Vendor Disclosure Form| 3.0
UMT0214| Certificate of Destruction| Not Released
UMT0255| Supplier Quality Handbook| Not Released
UMT2005| Vendor Cleaning Requirements Per UMT004| 1.0
A VAILABLE BY R EQUEST
Specification Number:| Description:| Revision:
UMT008| Additive Material Specification| 7.0
UMT010| Additive Manufacturing| 6.0
UMT2014| Additive Manufacturing – Velo3D Platform| 1.2
UMT2016| Certificate of Prequalification (CoP)| 1.2
UMT2017| Process Qualification Record – Velo3D Platform| 1.0
REVISION HISTORY
Revision| Release Date| Change Record| Changed By|
Change Reference
---|---|---|---|---
1.0| 04/03/2023| Initial Release| B. Howard| 1085765472
1.1| 04/07/2023| Reflect UMT-QP-0843 Rev 3.0| B. Mills| 1092235429
1.2| 04/10/2023| Reflect UMT-QF-0845 Rev 4.3| B. Mills| 1092943398
1.3| 04/28/2023| Reflect UMT-QP-0841 Rev 2.0 & UMT-QP-0843 Rev 3.1 ;
removal of UMT018 & UMT3008
| B. Mills| 1104366442
1.4| 06/19/2023| Reflect UMT-QP-0841 Rev 2.1, removed Certificate of
Destruction and Quality Handbook placeholder lines.| B. Howard| 1187893285
1.5| 08/25/2023| Reflect UMT-QP-0841 Rev 2.2| B. Howard| 1187893285
UMT-QF-0843 Rev 1.5
© Ursa Major Technologies, Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>