Kinan KFH162S-TX HDMI FHD Digital KVM Extender User Manual
- June 16, 2024
- Kinan
Table of Contents
HDMIFHDDigitalKVM
ExtenderoverFiber/Cat5
(KFH162S)
UserManual
@All right reserved Shenzhen Kinan Technology Co., Ltd.
Date: 2022/11 Version:V1.5
User Notification
All information, documentation, and specifications contained in this manual
are subject to change without prior notice. The manufacturer does not make any
explicit or implied statement or guarantee about the contents of this
document, especially for merchantability or fitness for any specific purpose.
Any manufacturer’s equipment described in this manual is sold or licensed as
it is.
If the equipment is damaged artificially after purchase, the buyer (not the
manufacturer) shall bear all costs for necessary repair and any losses caused
by equipment defects.
If the correct operating voltage setting is not selected before operation, the
manufacturer will not be responsible for any damage caused by system
operation. Please make sure the voltage has been set correctly before use.
Product Description
The KFH162S HDMI digital KVM extender delivers FHD HDMI video, USB2.0,
keyboard, mouse and stereo audio signals up to a remote desk over fiber optic
cable or Cat5 cable.
A complete set of KFH162S including Transmitter (KFH162S-TX) and Receiver
(KFH162S-RX). The Transmitter is connected to a computer or server, and the
receiver is connected to a display, keyboard, mouse, audio player and other
USB devices.
The KFH162S supports signal transmission over fiber optic cable or CatS cable,
it supports single-mode and multi-mode optical fiber, the maximum transmission
distance of single mode is 80km, for multimode the transmission distance is up
to 300m. If you connect the KFH162S-TX and KFH162S-RX with a Cat5 cable, the
transmitting distance is up to 150m. It supports the transmission of 1 channel
high-quality HDMI signals and has a wide range of applications.
*Note: The bandwidth of the optical module must reach 1.25Gbit/sec.
Product Features
- FHD HDMI video transmission, resolution is up to 3840×2160@30Hz
- Point-to-point protocol for ultra-low latency
- Supports 1000M LAN port
- Supports optical fiber transmission
- When using CATSE cable for direct connection, the transmitting distance can reach 150m
- Supports USB 2.0 transparent transmission — Supports a wide range of USB peripherals, such as encrypted U disk, face recognition and other USB devices, connect via the built-in 4 USB hub
- Bidirectional Analog Audio: line in/out with microphone and headphone support
- Supports 1-channel asynchronous serial transmission
- Supports connect to a switch (1000M)
- Supports point-to-point dial-up connection
- Built-in ESD protection circuit, can effectively prevent static electricity
KFH162S_RXfrontpanel
| No. | Components | Description |
|---|---|---|
| 1 | FIBER | Optical port, plug this port with an SFP+ module |
| 2 | RJ45 | RJ45 port, plug this port with a CAT5E cable |
| 3 | ID CODE | DIP switch for point-to-point DIP connection |
| 4 | SW1 | Pushbutton 1 |
| 5 | SW2 | Pushbutton 2 |
| 6 | USB2.0 | Connect to USB peripherals |
| 7 | DC 12V | 12V power connection port |
KFH162S_RXrearpanel
| No. | Components | Description |
|---|---|---|
| 1 | Ground connection | Connect the device to the ground |
| 2 | IR | Reserved port |
| 3 | Audio | Audio output |
| 4 | Microphone | MIC input |
| 5 | USB2.0 | Connect to USB peripherals |
| 6 | TGR | Serial port |
| 7 | HDMI OUT | Connect to a HDMI monitor |
| 8 | LINK | Connection status indicator |
| 9 | PWR | Power Indicator |
KFH162S_TXfrontpanel
| No. | Components | Description |
|---|---|---|
| 1 | FIBER | Optical port, plug this port with an SFP+ module |
| 2 | RJ45 | RJ45 port, plug this port with a CAT5E cable |
| 3 | ID CODE | DIP switch for point-to-point DIP connection |
| 4 | SW1 | Pushbutton |
| 5 | DC 12V | 12V power connection port |
KFH162S_TXrearpanel
| No. | Components | Description |
|---|---|---|
| 1 | Ground connection | Connect the device to the ground |
| 2 | IR | Reserved port |
| 3 | AOUT | MIC out |
| 4 | AIN | Audio in |
| 5 | USB IN | USB in |
| 6 | TGR | Serial port |
| 7 | HDMI IN | HDMI video input |
| 8 | LINK | Connection status indicator |
| 9 | PWR | Power Indicator |
Connection Diagram
- Connect the KFH162S_ TX to the HDMI video port, USB port and audio port of a computer. (See ① in the above diagram)
- Connect the KFH162S_RX to keyboard, mouse, monitor and audio device. (See ② in the above diagram)
- Connect the USB peripherals to the KFH162S_RX. (See ③ inthe above diagram)
- Connect the transmitter and receiver interfaces via optical fiber or CATSE cable. (See ④ in the above diagram)
- Power on the transmitter and receiver. (See ⑤ in the above diagram)
Specifications
| Function | KFH162S_TX | KFH162S_RX |
|---|---|---|
| Interfaces | HDMI in | 1 |
| HDMI out | NA | 1 |
| Power | 12V | 12V |
| SFP | SFP x 1 | SFPx 1 |
| Microphone | 3.5mm Stereo Jack (Pink) | 3.5mm Stereo Jack (Pink) |
| Speaker | 3.5mm Stereo Jack (Green) | 3.5mm Stereo Jack (Green) |
| LAN | RJ45 | RJ45 |
| USB Type B | 1 | N/A |
| USB 2.0 | N/A | USB x 4 |
| Resolution | 3840×2160@30Hz | |
| Connection Cable | Fiber optical cable or Cat5/6 cable | |
| Power Input | DC12V /2A | DC12V / 2A |
| Power Consumption | 3W | 2.5W (USB peripherals not included) |
| Operating Temperature | 0–50 ℃ | |
| Storage Temperature | -20–60 ℃ | |
| Humidity | 0–80% RH, Non-condensing | |
| Material | Metal | |
| Net Weight (kg) | 0.4 kg | 0.4kg |
| Product Dimension (W × D × H) | 158 mm x 80 mm x 30mm | |
| Package Dimension (W × D × H) | 395 mm x 274 mm x 110mm |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>