NZXT KRAKEN ELITE 360MM Liquid Cooler with LCD Installation Guide

June 11, 2024
Nzxt

NZXT KRAKEN ELITE 360MM Liquid Cooler with LCD

NZXT KRAKEN ELITE 360MM Liquid Cooler with LCD

COMPONENTS

  • A. Kraken Elite 240 / 280 / 360
    x1

  • B. Intel retention bracket (pre-installed )
    x1

  • C. AMD Retention Bracket
    x1

  • D. Intel Backplate
    x1

  • E. Intel Socket 1200/115X Standoff
    x4

  • F. Intel Socket 1700 Standof
    x4

  • G. AMD Standoff
    x4

  • H. AMD Sleeve
    x4

  • I. 30mm UNC 6-32 fan screw
    240 – x8, 280 – x8, 360 – x12

  • J. 5mm UNC 6-32 Screw
    240 – x8, 280 – x8, 360 – x12

  • K. Washer
    240 – x16, 280 – x16, 360 – x24

  • L. Thumbscrew
    x4

  • M. Breakout Cable Set
    x1

  • N. F Series – Static Pressure Fan
    240 – 120mmx2, 280 – 140mmx2, 360 – 120mmx3

HARDWARE INTRODUCTION

M BREAKOUT CABLE SET

Hardware Introduction

INSTALLATION

INSTALLING THE PUMP-INTEL LGA 1700&1200/115X

STEP 1

Move all four sliders on the Intel backplate to:

  • the innermost positions for Socket 1200 / 115X
  • the outermost positions for Socket 1700
    Installing The Pump-intel Lga 1700&1200/115x

STEP 2
Install the Intel backplate on the rear of the motherboard.

Installing The Pump-intel Lga 1700&1200/115x

STEP 3
From the front of the motherboard, install the four Socket standoffs.

Installing The Pump-intel Lga 1700&1200/115x

STEP 4
Orient the pump’s tube to fit your build. The display orientation can be adjusted in 90° increment via CAM.

Installing The Pump-intel Lga 1700&1200/115x

STEP 5
Place the pump with the retention bracket onto the CPU. Ensure the standoffs go through the holes on the bracket and apply the thumb nuts in the order as shown.

Installing The Pump-intel Lga 1700&1200/115x

INSTALLING THE PUMP- AMD SOCKET AM5, AM4, STRX4 & TR4

STEP 1
Remove the stock AMD mounting bracket and keep the original backplate on the rear of the motherboard.

Installing The Pump- Amd Socket Am5, Am4, Strx4* &
Tr4*

FOR SOCKET TR4, PLEASE SKIP TO AMD – STEP 4

STEP 2
From the front of the motherboard, install the four AMD sleeves. Make sure you use the right side of the sleeve .

Installing The Pump- Amd Socket Am5, Am4, Strx4* &
Tr4*

STEP 3
From the front of the motherboard, install the four AMD standoffs.

Installing The Pump- Amd Socket Am5, Am4, Strx4* &
Tr4*

STEP 4 – CHANGING THE RETENTION BRACKET

  1. Press and hold the Intel retention bracket firmly towards the pump.
  2. Rotate the Intel retention bracket counterclockwise to release.
  3. Pull out the Intel retention bracket.
  4. Follow these steps in reverse order to install the AMD retention bracket onto the pump.
    For SocketTR4, Install the AMD SocketTR4 retention bracket included inside the Threadripper CPU retail box.
    Changing The Retention Bracket

STEP 5
Orient the pump’s tube to fit your build. We recommend installing with the tubes exit at the 6 o’clock position. The display orientation can be adjusted in 90° increment via NZXT CAM.

Installing The Pump-amd Socket Am5, Am4, Strx4 & Tr4

STEP 6
Place the pump with the retention bracket onto the CPU. Ensure the standoffs go through the holes on the bracket and apply the thumb nuts in the order as shown.

Installing The Pump-amd Socket Am5, Am4, Strx4 & Tr4

MOUNTING THE RADIATOR AND FANS

Depending on your radiator mounting setup, please use the appropriate screws to mount the radiators:

  • DIRECT MOUNTING
  • INDIRECT MOUNTING

  NOTE

  • Always use washers to prevent damage.

DIRECT MOUNTING

For mounting in which the radiator fits directly onto the case, please install the fan(s) first using the 30mm fan screws and washers. Use the 5mm case screws and washers to mount the radiator.

Direct Mounting 

INDIRECT MOUNTING

For mounting in which the fan(s) fit between the radiator and chassis, please use the 30mm fan screws and washers for mounting.

Indirect Mounting 

POWERING THE PUMP & FANS

STEP 1
Connect the breakout cable to the pump.

Powering The Pump & Fans

Powering The Pump & Fans

STEP 2
Connect the 4-pin PWM fan cable to an open header on the fan splitter.

STEP 3
Connect the pump 3-pin connector to the 4-pin CPU_FAN or AIO_PUMP connector on the motherboard.

Powering The Pump & Fans

NOTE

  • You may need to disable fan-fail warning within the motherboard BIOS if CPU_FAN is unused.

STEP 4
Connect the USB connector to an available USB 2.0 internal header on the motherboard.

Powering The Pump & Fans

STEP 5
Connect pump SATA power cable to an available SATA power connector.

DOWNLOADING NZXT CAM

Download and install NZXT CAM from nzxt.com/camapp

APPENDIX

NZXT GLOBAL WARRANTY POLICY

This NZXT Global Warranty Policy governs the sale of products by NZXT to you.

WARRANTY LENGTH

Any replacement product will be covered under warranty for the remainder of the warranty period or thirty days, whichever is longer. Proof of purchase is required for warranty service.

WHO IS PROTECTED

NEW NZXT PRODUCT WARRANTY LENGTH FOR PARTS
Computer Cases 2 Years
Temperature Meters 2 Years
Fans 2 Years
Lighting 2 Years
Accessories 2 Years
Kraken M Coolers 3 Years
Headset/Headphone 2 Years
Headset/Headphone Storage 2 Years
Mixer 2 Years
Motherboards 3 Years
Bronze Power Supply 5 Years
Gold Power Supply 10 Years
Kraken X/Z/Elite 6 Years
REFURBISHED NZXT PRODUCT WARRANTY LENGTH FOR PARTS
All NZXT Certified Refurbished Products 1 Years

WHAT IS AND IS NOT COVERED

Please note that our warranty is not an unconditional guarantee. If the product, in NZXT’s reasonable opinion, malfunctions within the warranty period, NZXT will provide you at its sole discretion with a repaired or replacement product, either new or refurbished, with a similar function that is equal or greater in value depending on supply.

Our warranty does not cover the following:

  • any product or serial number/warranty sticker modification applied without permission from NZXT;
  • any damage that is not a manufacturing defect;
  • damage, deterioration or malfunction resulting from: accident, abuse, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification or failure to follow instructions included with the product;
  • improper installation, unauthorized alterations or modifications, or repair or attempted repair by anyone not authorized by NZXT;
  • shipping or transport damage (claims must be made with the carrier);
  • normal wear and tear.

NZXT does not warrant that this product will meet your requirements. It is your responsibility to determine the suitability  of this product for your purpose. For NZXT Store orders, we cover two way return shipping for all exchanges and returns. For all other authorized dealers, NZXT Support does not cover return shipping and only covers one way shipping from NZXT back to the end user for exchanges. Two way expedited shipping is provided for all PSUs covered under the Less Than Three program, indiscriminate of purchase location, provided the location is an approved NZXT reseller.

EXCLUSION OF DAMAGES (DISCLAIMER)

NZXT’s sole obligation and liability under this warranty is limited to the repair or replacement of a defective product with either a new or refurbished product with a similar function that is equal or greater in value at our option. NZXT shall not, in any event, be liable for any incidental or consequential damage, including but not limited to damages resulting from interruption of service and loss of data, business, or for liability in tort relating to this product or resulting from its use or possession.

LIMITATIONS OF IMPLIED WARRANTIEST

There are no other warranties, expressed or implied, including but not limited to those of merchantability or fitness for a particular purpose. The duration of implied warranties is limited to the warranty length specified in Paragraph I

TO OBTAIN TECHNICAL SUPPORT

If you have already referenced your product owner’s manual and still need help, you may contact us by phone at +1 800-228-9395, by email at service@nzxt.com, or visit the NZXT Support site at nzxt.com/customer-support.

HOW TO OBTAIN A WARRANTY SERVICE FROM NZXT

To receive a warranty service for your product when purchased directly from NZXT, you must submit a request via the NZXT Support site outlining the problem. If a technician deems the product defective or requiring testing, you will be required to provide a copy of your proof of purchase, which will enable you to submit a Return Merchandise Authorization “RMA” request.
Once approved, you`ll receive an RMA number, upon which you will be asked to ship the defective item back to NZXT with the RMA number clearly marked or labelled on the package. NZXT recommends that appropriate measures are taken to safeguard the product from damage during shipping.

APPLICABLE LAW AND ADDITIONAL LEGAL RIGHTS FOR CONSUMERS

This warranty gives you specific legal rights. These conditions are governed and construed in accordance with the laws of California (with exception of its conflict of law provisions), and the application of the United Nations Convention of Contracts for the International Sale of Goods is expressly excluded. The non-exclusive jurisdiction of the courts of California is agreed, which means that you may bring a claim to enforce your consumer protection rights in connection with this Global Warranty in the country which you have your habitual residence where you may have additional rights. These rights may vary.

For original consumers who are covered by consumer protection laws or regulations in their country, state, or province of purchase or, if different, their country, state, or province of residence, the benefits conferred by this warranty are in addition to all rights and remedies conveyed by such consumer protection laws and regulations. To the extent that liability under such consumer laws can be limited, NZXT’s liability is limited, and its sole option, to repair or replacement, either new or refurbished, with a similar function that is equal or greater in value depending on supply

In the United Kingdom:

  • For NZXT products sold to customers in the UK, during the expected lifespan of your product your legal rights entitle you to the following:
    • Up to 30 days: if your goods are faulty, then you can get an immediate refund.
    • Up to six months: if your goods can’t be repaired or replaced, then you’re entitled to a full refund, in most cases.
    • Up to six years: if your goods do not last a reasonable length of time you may be entitled to some money back.
  • If the person seeking to rely on the guarantee is not the original consumer, the NZXT Warranty will cover the product in relation to that person provided that they are able to provide proof of the transfer of the benefit of the guarantee from the original consumer.
  • The implied warranties under the Consumer Rights Act 2015 says that your goods must be as described, fit for all purposes for which such goods are usually supplied, and of satisfactory quality.

In the EU:

  • If you are a consumer and have your habitual residence in the EU, you additionally enjoy the protection afforded to you by provisions that cannot be derogated from by agreement by virtue of the law where you have your habitual residence.

WARRANTY SERVICE FROM RESELLERS

In the event that a warranty service is sought, you must provide proof of purchase (store receipt or invoice) in order to receive the service and if deemed necessary, repair or replacement product.

In North America:

Within the first 60 days after purchase, please return your product (or for power supplies installed within our enclosures, just the failed power supply) to your dealer or reseller for a replacement. If the product is still within warranty and you can no longer return it to your dealer, please contact NZXT Customer Support (see above) for assistance and instructions. NZXT will not accept returns without prior approval and an RMA number.

In Europe:

Within the first year after purchase, please return your product (or for power supplies installed within our enclosures, just the failed power supply) to your dealer or reseller for a replacement. If the product is still within warranty and you can no longer return it to your dealer, please contact NZXT Customer Support (see above) for assistance and instructions. NZXT will not accept returns without prior approval.

In Australasia:

Within the first two years after purchase, please return your product (or for power supplies installed within our enclosures, just the failed power supply) to your dealer or reseller for a replacement. If the product is still within warranty and you can no longer return it to your dealer, please contact NZXT Customer Support (see above) for assistance and instructions. NZXT will not accept returns without prior approval.
The cost of shipping will be borne at the first instance by you; however, if the purchased item is defective, NZXT will reimburse reasonable postage or transportation of costs.

Outside North America, Europe, and Australasia:

If your product needs to be returned within the warranty period, please contact the retailer or distributor from whom you purchased the product.

NZXT.COM STORE RETURNS/EXCHANGE POLICY 

Eligible products under this NZXT Warranty qualify for a full refund or exchange only with an authorized RMA number and if the item is returned to the NZXT.com store inventory within 30 days of purchase. Returns are not allowed beyond 30 days of the purchase date. The NZXT.com Store reserves the right to deny any return or exchange. Refunds will be credited to the original method of payment. To initiate a return, simply submit a request via NZXT support site.

NZXT, Inc./ 15736 E. Valley Blvd, City of Industry, CA 91744, USA
NZXT Europe GmbH/ Ammerthalstrasse 32 Kirchheim bei Muenchen
85551,Germany
NZXT UK Ltd./ First Floor 5 Fleet Place London EC4M 7RD,GB United Kingdom
+1 800-228-9395 / service@nzxt.com / NZXT.com

Visit nzxt.com/warranty and support.nzxt.com for information on warranty coverage and service.

SUPPORT AND SERVICE

SUPPORT AND SERVICE

If you have any questions or problems with the NZXT product you purchased, please don’t hesitate to contact us using our support system. support.nzxt.com

Please include a detailed explanation of your problem and your proof of purchase. For comments and suggestions, you can e-mail our design team, designer@nzxt.com. Lastly we would like to thank you for your support by purchasing this product.
For more information about NZXT, please visit us online. NZXT
Website: NZXT.com

REGULATIONS

Designed in Los Angeles, California. Made in China 中國製造 中国制造 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICE-003/NMB-003(B)

The maximum ambient temperature is 50℃, the maximum normal operating temperature of the radiator (coolant) is 60℃, and the maximum abnormal temperature of the radiator (coolant) is 70℃.

Symbol

Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals