Kinan KVM-1508XX 8 Port 19 LCD KVM Console User Manual

Kinan KVM-1508XX 8 Port 19 LCD KVM Console

Product Information

Specifications

• Product Name: 19LCD KVM Console (8 Port/ 16 Port)
• Print Date: 2023 / 04
• Version: V1.2

Description
The CAT5 LCD KVM console integrates multiple-port CAT5 KVM switches in a 1U height console. Multiple computers can be controlled from the single monitor- keyboard-mouse console.

KVM Installation
To install the KVM console, follow these steps:

1. Make sure the KVM console has been connected to the ground.
2. Connect the adapter to the KVM and the PC or server.
3. Connect any available KVM port and KVM adapter with CAT5 cables.
4. Plug the female port of the power cable in the KVM power socket, and plug the male port in the AC power port.

Note : If cascading is required, please connect KVM console and KVM switch with an adapter, and ensure that the hotkey is different between the KVM console and KVM switch.

Hotkey Setting
Follow these steps to check the hotkey setting:

1. Turn off Mouse Hotkey function (F4: Tool ->Mouse HotOn)
2. Keyboard hotkey setting (F3: Set -> OSD Hotkey)
   • Caps Lock + Caps Lock
   • F12 + F12
   • Ctrl + Ctrl + KVM Hotkey

Opening the Console

1. 1. Release the release catch.

2. Pull the KVM console all the way out until it clicks into place.

3. Rotate the LED module all the way back to expose the LED screen.

Best Resolution: 1280×1024@60Hz

• The KVM makes two beep sounds after power on, an OSD window appears for you to input a username and password. The orange LED and LED tube are flashing before you enter your password.
• LED panel is powered on when the power LED is green. Power on the computer or server after power on the KVM. The factory default password is blank; double click Enter to log in.

Closing the Console
Close the LED display panel and the power will automatically shut down. Push the release catch in the direction of the arrow, push the LED panel all the way in until it automatically locks up.

Operating the Monitor
Use the monitor adjust menu buttons to set up and configure the LED display.

Buttons

• MENU SELECT: Brings up the main menu.
• EXIT/AUTO: Exits the current menu and returns to the previous menu or exits the LED OSD. Press AUTO for automatic configuration.
• SL-/SL+: Moves the menu to make corresponding adjustments.

LED State

• Green: Running
• Red: Power off or access nonstandard VESA signal
• Flashing green: Energy saving mode or no signal

Press AUTO if the screen migrates after power on or under other circumstances, then the screen auto-configures to its best display state. Note: It may not be adjusted to its best state if part of the display mode is not standard VESA mode. If so, return back to OSD menu to RESET, then it will revert back to normal.

LED Functions

• Port Selection Buttons & LEDs: Switching freely from port 1 to port 16
• Reset Scan: Press 1 and 2 at the same time for three seconds resets the keyboard and mouse
• Brightness: Initialize
• Station ID

FAQ

• Q: How many ports does the KVM console support?
  A: The KVM console comes in two variants, one with 8 ports and another with 16 ports.

• Q: How do I connect the KVM console to the ground?
  A: Ensure that the KVM console is properly connected to the ground using the provided grounding mechanism.

• Q: What is the default password for logging into the KVM console?
  A: The factory default password is blank; you can log in by double-clicking Enter.

The CAT5 LCD KVM console integrates multiple-port CAT5 KVM switches in a 1U height console. Multiple computers can be controlled from the single monitor- keyboard-mouse console.

KVM Installation Diagram

1. Make sure the KVM console has been connected to the ground. ( ①)
2. Connect the adapter to the KVM and the PC or server(②③)
3. Connect any available KVM port and KVM adapter with CAT5 cables. ( ④)
4. Plug the female port of the power cable in the KVM power socket, and plug the male port in the AC power port. ( ⑤)

Note

1. Connect external USB keyboard, mouse and monitor according to the(⑥)step in
2. If cascading required, please connect KVM console and KVM switch with adapter (⑦), and Hotkey need to be different with KVM console and KVM switch.

Please check the hotkey setting

1. Turn off Mouse Hotkey function (F4: Tool ->Mouse Hot【On】)
2. Keyboard hotkey setting (F3: Set -> OSD Hotkey)

Opening the Console

1. Release the release catch; Note : The release lock can only do horizontal locking, it doesn’t bear any load.
2. Pull the KVM console all the way out until it clicks into place;
3. Rotate the LED module all the way back to expose the LED screen; the LED module can be rotated up to 108°.
4. The KVM makes two “beep” sounds after power on, an OSD window appears for you to input user name and password. The orange LED and LED tube are flashing before you enter your password.
5. LED panel is powered on when the power LED is green.
6. Power on the computer or server after power on the KVM. The factory default pass word is blank; double click “Enter “to log in.

Closing the console

• Close the LED display panel and the power automatically shut down.
• Push the release catch in the direction of the arrow, push the LED panel all the way in until it automatically lock up.

Operating the Monitor

Figure 3.4 Monitor adjust menu buttons

The LED OSD allows you to set up and configure the LED display.

EXIT/AUTO

| Exits the current menu and returns to the previous menu or exits the LED OSD.

Press AUTO for automatic configuration.

SL-/SL+| Moves the menu to make corresponding adjustment.
LED state|

• Green: Running
• Red: Power off or access nonstandard VESA signal
• Flashing green: Energy saving mode or no signal

Press AUTO if the screen migrates after power on or under other circumstances, then the screen auto-configures to its best display state.

Note:

• It may not be adjusted to its best state if part of the display mode is not standard VESA mode. If so, return back to OSD menu to RESET, then it will revert back to normal.
• It is recommended to set up the display mode at 1280×1024@60Hz, refresh rate at 60Hz.

OSD Operation
Double click the right button of the mouse or double click hotkey【Scroll Lock】 to invoke below OSD main menu. You can customize the OSD hotkeys; find more details in OSD function instructions.

To access the OSD menu through keyboard:

1. In the submenus that appears, moving the highlight bar to your selected port and then press Enter.
2. Press any key from 【0-9】to enter any port of current station

To access the OSD menu through mouse:

*Note: Operate via keyboard after invoke the OSD menu via the touchpad.

OSD Functions

• Set User login-Set User login account and password Set accessible-Set access permissions
• BRC Mode -monitor multiple computers at the same time Load Default-reset the menu to the original factory default settings

Scan| F2|

• All-Lists all the ports on the installation
• Power On-lists only powered on ports that have attached computers.
• Quick View-Lists only the ports that have been selected as
• Quick View ports

Set| F3|

• Auto Scan-set scanning time period
• Port ID-set how long a port displays on the monitor OSD Hotkey-set OSD hotkeys
• Lout Time off- to set the time out value

Tool

| ****

**** F4

|

• Reset RGB-Press Enter reset RGB
• Beeper【On】-press Enter switch Bee sounds
• Mouse Hot【On】-press Enter to close touchpad operating on OSD.
• Restore Values-press Enter restore the current user default value.
• About KVM- press Enter shows the KVM version

Edit| F6| Edits port names
QV| F7| Start or close Quick View
Lout| F8| Log out/lock the KVM
**** Exit| Esc| Press this key exits OSD menu
Scroll Lock| Press this key exits OSD menu
Num Lock| Press this key exits OSD menu

The display screen will be distorted if the CAT5 cable is too long, for this case, you can adjust according to below steps:

1. Press【+】and ADJ FOCUS will pop up, then press【+】,【-】to adjust definition.
2. Press【，】 and ADJ BRIGHT will pop up, then press【，】, 【.】 to adjust brightness.

Specifications (19”)

mouse

| PS/2, USB

**** LCD monitor

| LCD model| SXGA TFT
View area| 19″
Optimum resolution| 1280×1024@60Hz
Display color| 16.7 M
Brightness| 250cd/m²（ T y p ）
Contrast ratio| 1000 : 1 （ T y p ）
Pixel pitch(mm)| 0.2928(H) × 0.2928(W)
**** Mouse| X/Y resolution| >1000 points / inch, (40 points/mm)
Touchpad      with trackball| Eliminates the need for an external mouse
Keyboard| 99 keys (82 keys main keyboard +17

independent small number pad)

Port selection| Front panel pushbuttons, hotkeys, OSD menu
Input power| 100V- 240Vac , 50-60Hz , <1.5A
Power consumption| 20W| 21W
Operating temperature| 0 — 50 ℃
Store temperature| -20 — 60 ℃
Humidity| 0—80% RH, non-condensing
Net weight| 13.4kg| 13.4kg
Product dimension (W × D × H)| 448mm×605mm×42.5mm
Package dimension (W × D × H)| 765mm×615mm×185mm

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>