Kinan LH1701 1 Port 17.3 FHD KVM Console User Manual
- June 15, 2024
- Kinan
Table of Contents
Kinan LH1701 1 Port 17.3 FHD KVM Console
Brief Description
Single port console integrates the monitor, keyboard andmouseina1Udevice; it fits for installed in a standard 19” rack. It can connect one computer to control the monitor, keyboard and mouse.
Features
- 3 in 1 LED console integrates the monitor, keyboard and mouse.
- The HD console can be connected to a PC or a KVM switch to control and manage single/multiple PCs.
- 17.3” LED TFT monitor with high brightness, high definition and high resolution.
- Ultra-slim keyboard with 99 keys and numeric keypad
- Standard PS/2 interface
- Touch pad with trackball
- Automatically lock up with the front panel lock latch
- Compact steel construction and high quality hand-protection sliding rails
Product Appearance
Front View
- LED Monitor
- Rear bracket Slot
- OSD Controls
- Front bracket
- Keyboard
- Touch pad
- Handle
- Lock latch
- Display panel
Back View
- Power input(AC or DC)
- Power Switch
- Ground connecting screw
- KVM port
Cable Connection
To ensure signal integrity and simplify cable layout, we strongly recommend you use high quality cables with different length as shown in above table.
Rack Mounting
A standard rack mounting kit is provided to mount the switch in a depth of
510-850mm in a standard 19”rack.
With one person hold the switch in place and the other person slides the L
bracket into the switch’s side mounting brackets from the front to the back,
then screws the brackets to the rack. (See below installation diagrams)
Opening the Console
- Power on the KVM after connecting cables.
- Power on the server or PC after power on the KVM.
- Release the release catch.
*Note: The release catch can only do horizontal locking, it can’t bear any load.
- Pull the KVM console all the way out and the slide rail automatically locked to its place.
- Rotate the LED panel all the way back to expose the LED screen; the LED module can be rotated up to 108°.
Closing the Console
- Close the console and the power automatically shut down.
- Push the release catch in the direction of the arrow; push the LED panel all the way in until it automatically locks up.
OSD Controls
Table 1 OSD controls instructions
| Buttons | Functions |
|---|---|
| MENU SELECT | Press this button invokes the menu function and brings up the |
main menu.
EXIT/AUTO| Press EXIT exits the current menu and returns to the previous menu
or presses this button exits the LED OSD. Press AUTO for automatic
configuration.
SL-/SL+LED state| Press this button moves your menu to make corresponding
adjustment.
LED state| Green: running
Red: power off or access non standard VESA signal
Flash green: energy saving mode or no signal
Press AUTO when the screen migrates after power on or under other circumstances, then the screen auto configure to its best display state.(It might can’t be adjusted to its best state if part of the display mode is not standard VESA mode, if so return back to OSD menu to RESET, then it will back to normal.
We suggest our customers to set up the display mode at 1920×1080, refresh rate at 60Hz.
Specifications
| Model| LH1701
---|---|---
Computer Connections| Direct| 1
| Max| 1
Port
emulation
| Keyboard, mouse| USB
LED monitor| LED model| FHD TFT
View area| 17.3″
Optimum resolution| 1920×1080@60Hz
Display color| 262K
Brightness| 300cd/m²( T y p )
Contrast ratio| 800 : 1( T y p )
Pixel pitch(mm)| 0.1989(H) × 0.1989(W)
X/Y resolution| >1000 points / inch, (40 points/mm)
Mouse| Touchpad with trackball| Eliminates the need for an external mouse
Keyboard| 99 keys (82 keys main keyboard + 17 independent small number pad)
Input power| 100V-240Vac , 50~60Hz , <1.5A
Power consumption| 10W
Operating temperature| 0—50 ℃
Storage temperature| -20— 60 ℃
Humidity| 0—80% RH, non condensing
Net weight| 10.5 kg
Product dimension (W × D × H)| 448mm×525.6mm×42.5mm
Package dimension (W × D × H)| 765mm×615mm×185mm
Optional power input| -36V— -72Vdc
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>