beurer MN9X Multi Groomer Instruction Manual

: June 16, 2024
: Beurer

Table of Contents

beurer MN9X Multi Groomer
Instructions for use
instructions
INCLUDED IN DELIVERY
SIGNS AND SYMBOLS
INTENDED USE
WARNINGS AND SAFETY NOTES
DEVICE DESCRIPTION
INITIAL USE
USAGE
Hair clipper
CLEANING AND MAINTENANCE
ACCESSORIES AND REPLACEMENT PARTS
DISPOSAL
TECHNICAL SPECIFICATIONS
GUARANTEE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

beurer MN9X Multi Groomer

beurer-MN9X-Multi-Groomer-PRODUCT

Specifications

Model: MN9X
Weight: Approximately 154g
Dimensions: 16cm x 4cm x 4cm
Waterproof Rating: IPX7
Power Input: 5.0V, 1.0A
Battery Capacity: 800mAh, 3.7V Li-Ion

Included in Delivery
The package includes the following items:

MN9X Multigroomer
Hardcase
User Manual

Signs and Symbols
The user manual contains various signs and symbols to important information:

Indicates an immediate danger that, if not avoided, could result in death or serious injury.
WARNING” – Indicates a potential hazard that, if not avoided, could result in death or serious injury.
CAUTION” – Indicates a potential hazard that, if not avoided,could result in minor or moderate injury.
NOTE” – Provides important information and tips.

Instructions for use

instructions

Read these instructions for use carefully. Follow the warnings and safety notes. Keep these instructions for use for future reference. Make the instructions for use accessible to other users. If the device is passed on, provide the instructions for use to the next user as well.

WARNING

The device is only intended for domestic/private use, not for commercial use.
This device may be used by children over the age of 8 and by people with reduced physical, sensory or mental skills or a lack of experience or knowledge, provided that they are supervised or have been instructed on how to use the device safely, and are fully aware of the consequent risks of use.
Children must not play with the device.
Cleaning and user maintenance must not be performed by children unless supervised.
Under no circumstances should you open or repair the device yourself. If you do so, it may no longer function correctly. Failure to comply will invalidate the guarantee.
The hand-held part must be disconnected from the connection cable before it is cleaned in water.
When using the device in the bathroom, unplug the plug after charging as water in the vicinity constitutes a danger, even when the device is switched off.
If the mains connection cable of this device is damaged, it must be replaced by the manufacturer, its customer service department or a similarly qualified person to avoid any risk.
As an additional safety measure, we recommend the installation of a residual-current-operated protective device (RCD) with a rated operational current not exceeding 30 mA in the bathroom circuit. Your local electrical specialist can provide you with the relevant information.

INCLUDED IN DELIVERY

Check that the exterior of the cardboard delivery packaging is intact and make sure that all contents are included in the delivery. Before use, ensure that there is no visible damage to the device or accessories and that all packaging material has been removed. If you have any doubts, do not use the device and contact your retailer or the specified Customer Services address.

1 hand-held device
1 beard trimmer
1 hair clipper
1 body groomer
1 precision trimmer
1 nose/ear hair trimmer
2 comb attachments for the beard trimmer (3-7/8-12 mm)
4 comb attachments for the hair clipper (3-12 mm)
1 hard case
1 cleaning brush
1 bottle of cutting oil
1 charging cable

SIGNS AND SYMBOLS

The following symbols are used on the device, in these instructions for use, on the packaging and on the type plate for the device:

DANGER
Indicates an imminent danger. If it is not avoided, it will result in death or serious injury.

WARNING
Indicates a potentially impending danger. If it is not avoided, there is a risk of death or serious injury.

CAUTION
Indicates a potentially impending danger. If it is not avoided, slight or minor injuries may result.

NOTICE
Indicates a potentially harmful situation. If it is not avoided, the device or something in its vicinity may be damaged.

![beurer-MN9X-Multi-Groomer-03]](https://manuals.plus/wp- content/uploads/2024/01/beurer-MN9X-Multi-Groomer-03.png) beurer-MN9X-Multi-
Groomer-04

INTENDED USE

The device is only intended for cutting and trimming human facial and body hair. Do not use the device on animals or objects!
The device may only be used for the purpose for which it is designed and in the manner specified in the instructions for use. Any form of improper use can be dangerous. The manufacturer is not liable for damage resulting from improper or incorrect use.

WARNINGS AND SAFETY NOTES

WARNING

To avoid damage to health, we strongly advise against using the device in the following situations:

Danger of suffocation by packaging material! Keep packaging material away from children.
Inspect the device and accessories for visible damage before use. If you have any doubts, do not use the device and contact your retailer or the specified Customer Services address.
Keep the mains adapter away from water. If the device has been dropped or has suffered any other damage, it must no longer be used. Risk of electric shock and injury!
Risk of electric shock! If there is visible damage to the device, accessories or mains adapter, do not use the device if you have any doubts and contact your retailer or the specified Customer Services address.
Risk of injury! Do not use the device if the stainless steel blade is damaged as it may have sharp edges.
Do not use extension cables in the bathroom to ensure the mains adapter can be accessed quickly in an emergency.
Only use the original comb attachments.

WARNING

To avoid damage to health, please note the following

Do not use the device if you have sunburn, open wounds, eczema or cuts on your face.
Switch off the device before attaching or switching the comb attachment.
Risk of fire! Ensure that no highly flammable liquids are located near the device.
Remove all packaging material before using the device.
Ensure that the mains cable does not pose a trip hazard.
Only connect the device to a socket that has the correct voltage as indicated on the type plate.
Only operate the device according to the specifications on the type plate.
Only pull on the mains adapter to remove the mains cable from the socket.
Never leave the device unattended while in use.
Switch off the device after every use.
Pull the mains adapter out of the socket after each completed charging process.

Notes on handling cutting oil

Cutting oil may be harmful or fatal if swallowed. If swallowed, do not induce vomiting – seek medical attention immediately.
If cutting oil comes into contact with the eyes or mouth, rinse the affected area with plenty of water. If irritation persists, seek medical attention immediately.

NOTICE

Protect the device and its accessories from impacts, humidity, dirt, marked temperature fluctuations and direct sunlight.
Only operate, charge or store the device at temperatures from -10°C to 40°C.

Notes on handling batteries

WARNING

Do not disassemble, split or crush the batteries. Never subject the battery to mechanical impacts.
If fluid from a battery cell comes into contact with your skin or eyes, wash the affected areas with water and seek medical assistance.
Risk of explosion! Never throw batteries into a fire.
Protect batteries from excessive warmth, heat and sunlight.
Exposure of batteries to an environment with extremely high temperatures or extremely low air pressure may result in an explosion or leakage of flammable liquids and gases.

CAUTION
Charge the battery before use. Always use the correct charger. Avoid continuous charging.

NOTICE
After prolonged storage, it may be necessary to charge and discharge the battery several times to achieve maximum performance.

DEVICE DESCRIPTION

The related illustrations are on page 3.

Beard trimmer
comb attachments for the beard trimmer (3-7/8-12 mm)
Hair clipper
comb attachments for the hair clipper (3-12 mm)
Nose/ear hair trimmer
Precision trimmer
Body groomer
2-level precision adjustment: 0.8 and 1.2 mm
ON/OFF controller
LED display with battery status in % and charge display
Connection socket
Hard case
USB charging cable
Cutting oil
Cleaning brush

beurer-MN9X-Multi-Groomer-02

INITIAL USE

You must fully charge the battery for 90 minutes before the first use. The operating period of the device is approx. 90 minutes when it is fully charged.
If the battery charge level is less than 20%, the LED display will show 10 “Lo” for “Low” and flash.

Connect the USB charging cable 13 to the connection socket 11 and a mains adapter (not included in delivery). To charge the device, only use a protection class 2 mains adapter , which is approved for use with household appliances and whose output corresponds to the safety extra-low voltages of 5 V and max. 1 A.
Insert the mains adapter into a suitable socket. The LED display 10 shows the current battery status in % and the charge display flashes.
The battery is fully charged once the LED display 10 shows “100%” and the charging symbol is permanently illuminated. The device is now ready for use.

USAGE

Beard trimmer

Place the Beard Trimmer 1 onto the device from above until it clicks into place.
To remove the beard trimmer 1 , press it upwards with your thumb.
If necessary, select one of the two comb attachments 2 and place it on the beard trimmer. Make sure that you hear and feel the comb attachment click into place. We recommend that you start with the comb attachment with the longest cutting length initially so you can then slowly work your way up to your desired length.
To adjust the cutting length, slide the comb attachment 2 upwards or downwards.
To switch on the device, slide the ON/OFF controller 9 upwards. The LED display 10 will start to light up.
To switch off the device after use, slide the ON/OFF controller 9 down. The LED display 10 will go out.

Hair clipper

Place the hair clipper 3 onto the device from above until they clicks into place. To remove the hair clipper 3 , press them upwards with your thumb.
If necessary, select one of the four comb attachments 4 and place it on the hair clipper. Make sure that you hear and feel the comb attachment click into place. We recommend that you start with the comb attachment with the longest cutting length initially so you can then slowly work your way up to your desired length.
To switch on the device, slide the ON/OFF controller 9 upwards. The LED display 10 will start to light up.
Guide the device slowly through the hair.
Ensure that the comb attachment sits as flat against the head as possible. Always only trim small areas. Cut the hair against the direction of growth. If the hair grows in different directions, use the device in multiple directions.
To switch off the device after use, slide the ON/OFF controller 9 down. The LED display 10 will go out.

Nose/ear hair trimmer

Place the nose/ear hair trimmer 5 onto the device from above until you hear and feel it click into place.
To switch on the device, slide the ON/OFF controller 9 upwards. The LED display 10 will start to light up.
Slowly and carefully insert the tip into the front part of the nose or ear. Remove the nose or ear hair using small, circular motions.
To switch off the device after use, slide the ON/OFF controller 9 down. The LED display 10 will go out.

Precision trimmer

Place the Precision Trimmer 6 onto the device from above until you hear and feel it click into place.
To switch on the device, slide the ON/OFF controller 9 upwards. The LED display 10 will start to light up.
Use the Precision Trimmer 6 for small and hard-to-reach places.
To switch off the device after use, slide the ON/OFF controller 9 down. The LED display 10 will go out.

Body groomer

Place the body groomer 7 onto the device from above until you hear and feel it click into place.
To switch on the device, slide the ON/OFF controller 9 upwards. The LED display 10 will start to light up.
Guide the device slowly through the body hair. Ensure that the stainless steel razor blade sits as flat against the body as possible. Always only trim small areas. Cut the hair against the direction of growth. If the hair grows in different directions, use the device in multiple directions.
To switch off the device after use, slide the ON/OFF controller 9 down. The LED display 10 will go out.

CLEANING AND MAINTENANCE

Cleaning the device

Risk of electric shock! Always disconnect the device from the power source before cleaning it.
Risk of fire! Do not clean the device with highly flammable liquids!
Do not clean the device in the dishwasher!
The device is waterproof and can be cleaned under running water.

For thorough cleaning, pull the attachments upwards to remove them from the device.
Leave the attachments to dry completely before reattaching them to the device.

Oiling the beard trimmer and hair clipper

To consistently achieve optimal cutting results, regularly spread a little cutting oil over the blades of the beard trimmer 1 and hair clipper 3 .

ACCESSORIES AND REPLACEMENT PARTS

To purchase accessories and replacement parts, please visit www.beurer.com or contact the corresponding service address (according to the service address list) in your country. Accessories and replacement parts are also available from retailers.

DISPOSAL

For environmental reasons, do not dispose of the device in household waste at the end of its service life. Dispose of the device at a suitable local collection or recycling point in your country. Observe the local regulations for material disposal. Dispose of the device in accordance with EC Directive Waste Electrical and Electronic Equipment (WEEE). If you have any questions, please contact the local authorities responsible for waste disposal. You can obtain the location of collection points for old devices from the local or municipal authorities, local waste disposal companies or your retailer, for example.
Used, completely flat batteries must be disposed of via specially designated collection boxes, recycling points or electronics retailers. You are legally required to dispose of the batteries.

The codes below are printed on batteries containing harmful substances: