BUTURE VC60 Cordless Vacuum Cleaner User Manual

VC60 Cordless Vacuum Cleaner
User Manual

WARNING

Thank you for purchasing the BUTURE VC60 cordless vacuum cleaner. Before using this machine, please read the following safety warning first and take safety protection measures to avoid malfunctions caused by improper operation.
Note: The vacuum cleaner adopted thermal protection technology to prevent overheating, will stop working when the item is over-heated.
The product provides a free 2-year warranty by default. To extend the warranty to 3 year, please contact [email protected] in time to activate.

1. This BuTure appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction by a responsible person concerning use of the appliance to ensure that they can use it safety.
2. Suitable for dry locations only. Do not use or store outdoors with wet surfaces. Do not handle any part of the plug or appliance with wet hands. Store properly in a dry place indoors.
3. Do not use a damaged cable or plug. If the device or charger does not work properly, dropped, damaged, missed or dropped into water, please contact [email protected] , BuTure after-sales team for support.
4. Do not vacuum flammable or combustible liquids, such as petrol, or use in areas where liquids may be present.
5. Turn off the power switch before plug or unplug the adapter.
6.  Do not vacuum anything that is burning or smoking, such as cigarettes, matches or hot ashes.
7. o not use without filters or dust cup to avoid damaging the motor and contaminating the air. Wash hands after using the vacuum cleaner.
8. FIRE WARNING: Do not place this product on or near a cooker or any other hot surface and do not incinerate this appliance even if it is severely damaged. The battery might catch fire or explode.
9. Unplug the charger from the power outlet before performing routine cleaning or maintenance.
10. Battery leaks may occur under extreme conditions. If any liquid gets on your skin wash quickly with soap and water. f liquid gets into your eyes, rinse with water for at least 15 minutes immediately. Seek medical attention immediately.
11. Charge the unit with the charger we provided.
12.  Avoid using this product to vacuum hard, sharp objects, as this may cause damage.

PACKAGE LIST

Please check and confirm the accessories and parts according to the following sheet before using.

KNOW YOUR PRODUCT

3.1 Product Details   3.2 Digital Display Screen 3.3 Accessories Function
Remove dust on the hard-to-reach areas like windows, bed feet, gaps between sofa, etc.

• Long Crevice Nozzle

• 2 in 1 Upholstery Brush
  Easy to snap-on, and can help you remove dust and hairs in keyboard or on the carpet.

• Wall Mount
  Fix the cordless vacuum cleaner and accessories on the wall mount for easy storage.

• Mini Cleaning Brush
  Remove hair, rubbish, and micro dust on the accessories or filters.

PRODUCT ASSEMBLY

4.1 Install the Battery Pack
Insert the battery pack into the main body in the direction guided as the photo below.

4.2 Install Full Vacuum Cleaner

1. Install Extention Tube & Cleaning Accessories
2. Directly Install Cleaning Accessories
3. Install Wall Mount
4. According to different needs, the length of the tube can be adjusted.
5. According to different needs, place or take out the aromatic tablet.

WARNING

• Please make sure there is no gas, water, or electrical cables and wires behind the mounting area.
• To avoid the dock dropping down, please make sure it must be installed firmly.
•  Store appropriately indoors in a dry place. Do not expose the machine to sunlight or freezing temperature. Recommended temperature range: 39.2°F (4°C)-104°F(40°C).

HOW TO USE

5.1 Charging
When the battery indicator on the display screen is under 30% or the following animation appears, the vacuum cleaner needs to be charged as soon as possible. Three Charging Methods

1. Connect the main body to charge.
2. Hang on the wall mount to charge.
3. Charge the battery directly.

The battery indicator light on it will keep flashing in red when the battery is being charged, and will turn blue when it is fully charged. 5.2 Operating
Warning:

1. Do not exceed the “MAX” dust collection capacity of the dust cup.
2.  Please keep the suction nozzle unobstructed and avoid blockage. Otherwise, the motor will overheat and cause danger.
   • Press the switch button to start work

• Adjust suction power
  Press the suction adjustment button to adjust the power as you need.

The suction on the screen shows green, the vacuum cleaner is in ECO ode.| Press the button once, the suction on the screen shows mint green, the vacuum cleaner is in MID mode.| Press the button once, the suction on the screen shows blue, the vacuum cleaner is at the MAX suction mode.

6. MAINTENANCE

Warm Tips:

• Please clean the vacuum cleaner regularly to extend its lifespan.
• After cleaning the parts of the vacuum cleaner, please wait until they are completely dry before reinstalling them on the vacuum cleaner.

6.1 Main Body Cleaning

• Turn off the power and remove the battery pack before cleaning the main body.
• Please use a neutral detergent, and wipe the main body with half-wet cloth.
• Please avoid sun exposure and store in a cool and dry place.

6.2 Dust Cup and Filters Cleaning

1. Empty the Dust Cup
   • When the garbage in the dust cup exceeds MAX Line, please empty it in time. • Remove the dust cup

2. Remove the Dust Cup and Filters • Take out the stainless steel filter and the HEPA filter.

3. Clean the Dust Cup and Filters with Water(Warning: make sure the dust cup and filters are completely dry before installation.)

4. Install the Dust Cup and Filters
   • Put the filters into dust cup, the sponge is placed under the HEPA. • Press the dust cup release button and reinstall it on the vacuum cleaner.

6.3 Brush Roller Cleaning
Ensure the appliance is disconnected from the charger before removing the roller brush. Be careful not to pull the ON button.

1. Push the button to the “unclock” sign, remove the brush roller
2. Remove the debris wrapped around the roller with the  mini cleaning brush
3. Clean the roller brush with/without water
4. Push in gently to install the roller brush. Before replacing, make sure the brush is completely dry.

 SPECIFICATIONS

TROUBLESHOOTING

If there is any problem during use, please check the following troubleshooting table. If the problem can’t be solved, please contact the after-sales email: [email protected]

• When the vacuum cleaner does not work properly, there will be a corresponding fault remind animation on the screen, please check it in time.
  8.1 Abnormal Indicator
  Low battery warning, please charge in time.
  Airway blockage reminder, please check and clean the extension tube and dust cup as shown in the animation on the screen.
  Floor brush clogging reminder, please check whether the floor brush is entangled by obstructions and clean it promptly.
  Wrong charger used. A wrong charger can destroy your vacuum, please make sure you are using the original charger, and confirm that the specification is: 31.0V 0.5A
  8.2 Other Common Trouble

2.Automatic protection triggered by excessive temperature due to blockage
3.Battery damaged| 1.Charge before use
2.Clean the floor brushes, dust suction ports or air Inlet filters, and restart after cooling down
3.Replace a battery
Suction reduced| 1.The dust cup is full of dust
2.The filters are full of dust
3.The telescopic tube or brush Inlet blocked
4.Low battery power| 1.Empty the dust cup
2.Clean or replace the filter
3.Remove blockage In tube and brush Inlet
4.Charge before use
Insufficient use time after charging| 1. Insufficient charging time
2.Battery aging
3.The dust cup is full of dust
4.The filters are full of dust
5.The telescopic tube or brush inlet blocked
6.Always use the highest speed to clean the whole house| 1.Recharge the battery
2.Change a battery
3.Empty the dust cup
4.Clean or replace the filter
5.Remove blockage in tube and brush Inlet
6.For simple cleaning, It is recommended to use the lowest speed or the medium speed. Only larger garbage needs the highest speed, which can effectively prolong the battery life. If you have a larger space to clean, contact tech- [email protected] to get additional spare battery.
Common Trouble| Possible Causes| Solutions
---|---|---
Battery indicator does not
light up when charging| 1.Battery damaged
2.Wrong charger used
3.Adaptor incorrectly connected or damaged| 1.Replace a battery
2.Check whether the adapter Is plugged in.
3.Make sure to use the original charger, the specification is: 31.0V =0.5A
Not charging| 1.Battery temperature is too high or too low
2.The battery indicator does not light up when charging| 1.Please wait for the battery temperature to return to normal before charging
2.Check whether the adapter Is plugged in. Replace a battery or adaptor

WARRANTY

BuTure cordless vacuum cleaner has a two-year warranty. To extend the warranty to 3 year, please contact [email protected] in time to activate.
The warranty includes: free maintenance of the cordless stick vacuum, free replacement of defective parts, including battery, filters, floor brush, dust container, charger and motor.
If your machine is not functioning properly, or you still have any questions after reading this manual carefully, please feel free to contact us via tech- [email protected], we will reply to you in 24 hours and try our best to provide you with a satisfactory solution.

• Warranty Service
• Technical Support

[email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>