BUTURE JR300 Stick Vacuum Cleaner User Manual

BUTURE JR300 Stick Vacuum Cleaner

INTRODUCTION

Thank you for purchasing the BUTURE JR300 stick vacuum cleaner. Please read the user manual carefully before using the product and take safety protection measures to avoid malfunctions caused by accidental operation. If the product are given to another person, please make sure to also include this user manual.

The product is provided 2-year free warranty, if there is any question, please contact [email protected].

WARNING

• This product is suitable for children 8 years old and above. Users with reduced physical functions, sensory or intellectual abilities or lack of experience and knowledge are advised to use the product in a safe manner with supervision or guidance and to be aware of the hazards involved.
• Please pay attention to safety when children or pets near the vacuum cleaner.
• Children should not clean or use the product without supervision.
• Battery leaks may occur under extreme conditions. If any liquid gets on your skin, wash quickly with soap and water. If liquid gets into your eyes, rinse with water for at least 15 minutes immediately. Seek medical attention immediately.
• Store properly in a dry place indoors. Do not expose the machine to freezing temperatures.
• Do not place this product on or near a cooker or any other hot surface and do not incinerate this appliance even if it is severely damaged. The battery might catch fire or explode.
• The vacuum cleaner adopted thermal protection technology to prevent overheating, will stop working when the item is overheated.
• Do not leave the power on when unattended and disconnect the charger when not in use after saturated charging or before maintenance.
• Do not use any external power cord.
• Use only with original accessories.
• Do not absorb liquids, sharp objects, such as nails or thumbtacks, etc.
• Check that the voltage used for the vacuum cleaner must be the same as the supply voltage.
• Do not immerse the plug or any part of the vacuum cleaner in water or other liquids, except the filters.
• Do not leave the vacuum cleaner while it is in operation.
• If the power cord is damaged, please stop using the vacuum cleaner immediately and contact [email protected] for a solution.
• In the event of a malfunction, please stop using it immediately and contact [email protected] for a solution.

CONTENT OF PACKAGE

Please check and confirm the accessories and parts according to the following sheet before using.

KNOW YOUR PRODUCT

CHARGING

Warning

• Turn off the power before charging.
• Only charge with the original charger to avoid damage to the vacuum cleaner.
• During over-current protection and over-voltage protection, the battery indicators flash at the same time, and the screen goes out.

1. One end of the charger is connected to the power supply and the other end is connected to the battery charging port.
2. During charing, the battery indicator on screen shows red when it is under 10%, and turns green when higher than 10%. During using, the indicator shows red and flashes when it is under 10%, and it shows green and stay lighting up when it is higher than 10%.
3. During charing, 3 indicator lights on battery flash cyclically. During using, when the battery is at 0-33%, 1 light lights up, 2 lights light up at 33-66%,and 3 lights light up at 66-100%.

ASSEMBLING

1. Connect the telescopic tube.
   • Insert the telescopic tube into the main body and make sure it is secure. Press the release button, the telescopic tube can be removed.
2. Connect brush heads.
   • To clean sofas and beds, brush head can be assembled with the main body without telescopic tube.
   • To clean floor, stairs and high places, it’s suggested to connect with telescopic tube.

USING

Warning: Do not exceed the “MAX” dust collection capacity of the dust cup. Please keep the suction nozzle unobstructed and and avoid blockage. Otherwise, the motor will overheat and cause danger.

1. Choose a brush head according to your needs.
2. Aim the suction port of the vacuum cleaner at the surface of the object to be cleaned.
3. Press the ON/OFF button to start work.
4. Adjust suction power.
   • Do not exceed the “MAX” dust collection capacity of the dust cup. Please keep the suction nozzle unobstructed and and avoid blockage. Otherwise, the motor will overheat and cause danger. Press the ON/OFF button,vacuum cleaner works in eco mode.Press suction adjustment button,the vacuum works in standard mode.Press again, it works in high mode.The MAX/MIN lights up red on high mode. One more press,it goes back to eco mode.
   • Press the ON/OFF button,vacuum cleaner works in eco mode.Press MAX/MIN on screen,the vacuum works in standard mode.Press again, it works in high mode.The MAX/MIN lights up red on high mode. One more press,it goes back to eco mode.
5. According to different needs, the length of the tube can be adjusted.
   • When you need to extend the tube, press the button behind the tube and extend the tube at the same time. When you need to shorten it, press the button and pull the tube back.

CLEANING

1. Clean the dust cup.
   • To maintain good suction power, please empty the dust cup and clean the filter after each use.
   • Press the release button on dust cup to open the dust cup lid, dump out the trash.
   • Press the main body release button to remove the dust cup.
   • Turn the dust cup from ‘ ’ to ‘ ’.Take out the Hepa filter and the stainless steel filter.
   • Clean the filter and dust cup with water, and allow to dry naturally for 24 hours before refilling in the dust cup.
   • Warning: Do not use cleaning equipment to clean the filter, do not use drying equipment to dry the vacuum cleaner, natural drying only.
   • Reinstallation.Put the filter back into the dust cup. Install the dust cup into motor unit.
2. Clean the brush.

• Warning: Ensure the appliance is disconnected from the charger before removing the roller brush. Be careful not to pull the ON button.

1. 1. Push up the switch to the “unlock” side, remove the plug, then take out the roller brush.

2. Use the small cleaning brush to sweep away the trash on the roller.
3. Clean the roller brush with/without water.
4. Push in gently to install the roller brush. Before replacing, make sure the brush is completely dry.

MAINTENANCE

1. The filter can be cleaned with warm water. After cleaning it must be thoroughly dried before putting it back into use. Do not immerse the main unit in water or any liquid.
2. Clean the vacuum cleaner casing only with a soft, slightly damp cloth. Do not allow any liquid substances to enter the vacuum cleaner.
3. Do not use any corrosive chemicals or abrasives
4. It is recommended to change the filter every three months (depending on use) to ensure optimum performance. Do not use the filter when it is damaged or worn out.

TROUBLESHOOTING

WARRANTY

If there is any problem or malfunction during use, please send your question and order number to our email. We will provide you a good after-sales service within 24 hours.

E-mail: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>