JBL PartyBox 710 Bluetooth Speaker User Guide

PartyBox 710 Bluetooth Speaker
User Guide

PartyBox 710 Bluetooth Speaker

www.jbl.com

Before using this product, read the safety sheet carefully.* Power cord quantity and plug type vary by regions.Download and install the JBL PARTYBOX App to get more from the product.

• Rotate to adJust the microphone gain.
•  Rotate to adJust the microphone volume.
•  Rotate to adJust echo, treble, and bass respectively

• Rotate to adjust the guitar gain
•  Rotate to adjust the guitar volume.

Select a special sound effect such as horn, clapping, scratch. Always keep the port dry before connecting AC power.

• Transducers: 2 x 216 mm (8″) woofer, 2 x 70 mm (2.75″) tweeter
• Output power: 800 W RMS (IEC60268)
• Power input: 100 – 240 VAC -50 / 60 Hz
• Frequency response· 35 Hz – 20 kHz (-6 dB)
• Signal-to-noise ratio: > 80 dB
• Cable type: right-angle AC power cable (type varies by regions)
• Cable length: 2.0 m / 6.6 h
• USB charge out: 5 VI 2.1 A (max)
• USB format: FATl 6, FAT32
• Bluetooth• version: 5.1
• Bluetooth• profile: A2DP Vl .3, AVRCP Vl .6
• Bluetooth” transmitter frequency range: 2400 MHz – 2483.5 MHz
• Bluerooth• transmitter power: ~ 11 dBm (EIRP)
• Bluetooth• transmitter modulation: GFSK, n/4 DQPSK, 8DPSK
• Supported formats: .mp3, .wma, .wav
• Aux-In: 250 mVrms (3.5 mm connector)
• Mic-In: 20 mVrms
• Guitar-In: 100 mVrms
• Bluetooth/USB input: -12 dBFS
• Product dimensions (W x H x D): 399 mm x 905 mm x 436 mm/ 15.7″ x 35.6″ x 17.2″
• Net weight: 27.8 kg/ 61 .3 lbs
• Packaging dimensions (W x H x D): 1048 mm x 505 mm x 467 mm/
• 41.26″ X 19.88″ X 18.39″
• Gross weight. 31 kg/ 68.34 lbs

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such ma rks by HARMAN In ternational Industri es, Incorporated is under license. Ot her trademarks and trade names are those of their respective owners.
Made for iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 mini, iPhone SE (2nd generation), iPhone 1 1 Pro Max, iPhone 1 1 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE,  Phone 6s Plus, and iPhone 6s. Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Apple, and iPhone are t rademarks of Apple Inc., registered in the U.S. and other countries. The trademark “iPhone’ is used in Japan with a license from Ai phone K.K
Note: The product is in compliance with the Eu ropean Union energy legislation.

1. Bluetooth/TWS connection mode
   The product is intended to be used for streaming music via Bluetooth connection. A consumer can stream Bluetooth audio to the speaker. When the product is connected through Bluetooth, the Bluetooth connection must remain active at all times to ensure proper operation.
   The product wi ll enter sleep mode (networked standby) after 20 minutes without operation. The power consumption in sleep mode is less than 2.0 Watts, after which it can be re-activated via Bluetooth connection.

2. Bluetooth disconnection mode
   The product will enter standby mode after 20 minutes without operation. The power consumption in standby mode is less than 0.5 Watts.

The maximum operation temperature is 45c
No naked flame sou rces, such as lighted candles, should be placed on the apparatus.
**** This equipment is a Class !I or double insulated electrical appliance

PARTYBOX 710

For all products:

1. Read these instructions.

2.  Keep these instructions.

3.  Heed all warnings.

4. Follow all instructions.

5. Do not block any ventilation openings. Install this apparatus in accordance with the manufacturer’s instructions.

6.  Do not install this apparatus near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.

7. Donot defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

8.  Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus.

9. Use only attachments/accessories specified by the manufacturer.

10. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution  when moving the cart/apparatus combination to avoid injury from tip-over.

11. Unplug this apparatus during lightning storms or when unused for long periods of time.

12. To disconnect this apparatus from the AC mains completely, disconnect the power-supply cord plug from the AC receptacle.

13.  The mains plug of the power-supply cord shall remain readily operable.

14.  This apparatus is intended to be used only with the power supply and/or charging cable provided by the manufacturer.

CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
THE LIGHTNING FLASH WITH AN ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE PRODUCT.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
Caution FCC and IC statement for users (USA and Canada only)
This device complies with part 15 of the FCC Rules. Operation s subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept  any interference received, including interference that may cause undesired operation.
CAN ICES-3(B)/NMB-3(B)
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by HARMAN could void the user’s authority to operate the equipment.
For Products That Transmit RF Energy
FCC AND IC INFORMATION FOR USERS
This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC/IC Radiation Exposure Statement
This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
FCC Caution:
High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. No configuration controls are provided for this wireless equipment allowing any change in the frequency of operations outside the FCC grant of authorization for US operation according to Part 15.407 of the FCC rules.
IC Caution:
User should also be advised that:
(i) The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. Limit: and (iii) The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. Limits specified for point-to-point and non-point-to-point operation as appropriate. (iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 52505350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
Exposure of humans to RF fields (RSS-102)
The computers employ low gain integral antennas that do not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s Website at http://www.hc-sc.gc.ca/
The radiated energy from the antennas connected to the wireless adapters conforms to the IC limit of the RF exposure requirement regarding IC RSS-102, Issue 5 clause 4. SAR tests are conducted using recommended operating positions accepted by the FCC/
RSS with the device transmitting at its highest away from the body. Non- compliance with the above restrictions may result in a violation of FCC RF exposure guidelines. Use Restriction: Attention in France, the operation is limited to indoor use within the band 5150-5350 Mhz.
For Products with Radio Receivers That Can
Use an External Antenna (USA ONLY)
CATV (Cable TV) or Antenna Grounding If an outside antenna or cable system is connected to this product, be certain that it is grounded so as to provide someprotection against voltage surges and static charges. Section 810 of the National Electrical Code (NEC), ANSI/NFPA No. 7001984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements of the electrode.
Note to CATV System Installer
This reminder is provided to call the CATV(cable TV) system installer’s attention to article 820-40 of the NEC, which provides  guidelines for proper grounding and, in particular, as close to the point of cable entry as possible.
FOR ALL EU COUNTRIES
For products that include audio out Prevention of hearing loss
Note:
Caution: Permanent hearing loss may occur if earphones or headphones are used at high volume for prolonged periods of time.
For France, the products have been tested to comply with Sound Pressure Level requirement laid down in the applicable NF EN 50332 L.5232-1.

• To prevent possible hearing damage, do not listen to high volume levels for long periods.

WEEE Notice
The Directive on Waste Electrical Equipment (WEEE), which entered into force as European law on 14/02/2014, resulted in a major change in the treatment of electrical equipment at endof-life. The purpose of this Directive is, a first priority, the prevention of WEEE, and in addition, to promote the reuse, recycling and other forms of recovery of such wastes as so as to reduce disposal.
The WEEE logo on the product or on its box indicating collection for electrical and electronic equipment consists of the crossedout wheeled bin, as shown below.
This product must not be disposed of or dumped with your other household waste. You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specified collection point for  recycling of such hazardous waste. Isolated collection and proper recovery of your electronic and electrical waste equipment at the time of disposal will allow us to help conserving atural resources. Moreover, proper recycling, and collection points, please contact your local city center, household waste disposal service, shop from where you purchased the equipment, or manufacturer of the equipment.
RoHS Compliance
This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
For All Products Except Those with Wireless Operation
HARMAN International hereby declares that this equipment is in compliance with EMC 2014/30/EU Directive, LVD 2014/35/EU Directive. The declaration of conformity may be consulted in the  support section of our Web Site, accessible from www.jbl.com.
For All Products with Wireless Operation
HARMAN International hereby declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted in the support section of our Web Site, accessible from www.jbl.com.
EPILEPSY WARNING
A few people may experience epileptic seizures when viewing flashing lights.
INTRODUCTION
Congratulations on your purchase! This manual includes information about PartyBox 710 speakers. We encourage you to take a few minutes to read this manual, which describes the product and includes step-by-step instructions to help you to set up and get started. Read and understand all the safety instructions before using your product. If you have any questions about these products, their installation or their operation, please contact your retailer or customer service, or visit us at www.jbl.com.
WHAT’S IN THE BOX

1. Main unit
2.  Power cord*
3. Quick Start Guide, Safety Sheet, Warranty Card

*Power cord quantity and plug type vary by regions.

 PRODUCT OVERVIEW

3.1 Top Panel

1. KARAOKE controls (for MIC input only)
   – BASS +
   • Adjust the bass level.
   – TREBLE +
   • Adjust the treble level.
   – ECHO +
   • Adjust the echo level.

2. • Select a special sound effect such as horn, clapping, scratch.

3. • Turn the power on or off.

4. • Play, pause or resume.
   • Rotate clockwise / counterclockwise to increase / decrease the main volume.

5. • Enhances the bass level: level 1, level 2, or off.

6.  LED ring

7. • Press to enter Bluetooth pairing mode.
   • Press and hold for more than 10 seconds to forget all paired devices.

8. • Press to turn light effect on or off.
   • Hold for more than 2 seconds to turn strobe light on or off.
   • Rotate clockwise / counterclockwise to switch between different light patterns.

9. Mobile device dock
   Caution:
   – Do not look directly at the light-emitting parts when the speaker lights are turned on.

LED behavior

| | Solid white| Power on
---|---|---|---
| Solid amber| Standby
| Off| Power off
| | Flashing white quickly| Pairing
| White (Constant)| Connected
| Off| Not connected
| | Solid white| Level 1 Level 2
| Off| Off

3.2 Back Panel

1. USB
   • Connect to a USB storage device.
   • Charge your mobile device.

2.  AUX IN
   • Connect to an external audio device through a 3.5 mm audio cable (not supplied).

3.  GAIN 2
   • Adjust gain of the corresponding microphone or guitar input.

4. Microphone/guitar volume knob )
   • Adjust volume of the corresponding microphone   or guitar (if connected).

5.   Connect to a microphone or guitar.

6. IN/OUT
   • Daisy-chain multiple PartyBox speakers through 3.5 mm audio cables (not supplied).

7.  TWS
   • Press to enter True Wireless Stereo (TWS) pairing mode.

8. Connect to a microphone.

9. Microphone volume knob ( )
   • Adjust volume of the corresponding microphone ( ) (if connected).

10.  GAIN 1
    • Adjust gain of the corresponding microphone ( ) input.

11.  AC
    • Connect to AC power supply.

PLACEMENT

Caution:
– Do not sit or lean on the speaker or push it sideways to avoid tipover and possible damages.
Place the speaker on a flat, stable surface and ensure that the rubber feet side is down.

POWER ON

Cautions:

• Use the provided power cords only.

1. Connect AC power.
2.  Press to   power on.

Tip:

• The speaker switches to standby mode automatically after 20 minutes of inactivity. You can press on the speaker to switch to normal operation.

 USING YOUR PARTYBOX

Notes:

• Only one sound source can be played at a time. The priority order is USB -> BLUETOOTH -> AUX.
• Starting a source with higher priority will always interrupt a source with lower priority.
• To start a source with lower priority, stop the source with higher priority first.

6.1 Bluetooth Connection
You can use the speaker with your Bluetooth enabled smartphone or tablet.

1. Press   on the speaker to enter Bluetooth pairing mode.
2.  Choose “JBL PartyBox 710” on your Bluetooth device to connect.
3.  Once successfully connected, you can stream audio from your Bluetooth device to this speaker.

Notes:

• This speaker can memorize a maximum of 8 paired devices. The ninth paired device will replace the first one.
• Enter “0000” if a PIN code is requested for connection to a Bluetooth device.
• Bluetooth performance can be affected by the distance between this product and your Bluetooth device and the environment of operation.

To terminate the Bluetooth-enabled device:

• Turn off this speaker, or
• Disable Bluetooth on your device.

To reconnect the Bluetooth enabled device:

• When you turn on this speaker next time, it tries to reconnect the last connected device automatically.
• If not, manually select “JBL PartyBox 710” on your Bluetooth device to connect.

6.2 USB Connection Plug a USB storage device that contains playable audio contents
into the USB port of the speaker.
The speaker switches to the USB source automatically.  Audio playback will start automatically.
Tip :

• The speaker plays audio files on the USB storage device from the root folder to the last level of subfolders in alphabetical sequence.
  Up to 8 levels of subfolders are supported.

Supported audio formats

6.3 Music Control

• Press once to pause or resume playback.
• Press twice to skip to the next track.
•  Press three times to skip to the previous track.
•  Rotate the volume knob clockwise or counterclockwise to increase or decrease main volume.
•  Press BASS BOOST to enhance the bass level: level 1, level 2, or off.

Note:

• The skip operation is unavailable in AUX mode.

6.4 AUX Connection

1. Connect an external audio device to the speaker through a 3.5 mm audio cable (not supplied).
2.  After stopping playback from any other source, start audio playback on the external device.

6.5 Mixing Sound with a Microphone and / or Guitar
By using a microphone or electric guitar (not supplied), you can mix sound with an audio source.
Notes:

• Always set the guitar or microphone volume to the minimum level before guitar or microphone connection / disconnection.
• Always disconnect the guitar or microphone when you are not using them.

6.5.1 Connecting a Microphone

1. Connect a microphone to the or   socket.
2. When connecting a microphone to the socket, switch the slider to show .

6.5.2 Connecting a Guitar

1. Connect a guitar to the socket.
2.  Switch the slider to show .

6.5.3 Mixing Sound
Sing through the microphone or play guitar.

• To adjust the volume of the audio source, rotate the volume knob clockwise or counterclockwise.
• To adjust the volume of the microphone or guitar, rotate the corresponding microphone or guitar volume knob.
• To adjust the gain of the wired microphone or guitar, rotate the corresponding GAIN 1 or GAIN 2 control respectively.
•  To adjust the echo, treble and bass level of the microphone, rotate the ECHO, TREBLE and BASS knob respectively.

6.6 Charging Your Mobile Device

CARRYING YOUR PARTYBOX

Cautions:

• Before carrying the speaker, ensure that all the cords are disconnected.
•  To avoid personal injury and/or property damage, hold the product firmly while carrying.

The PartyBox 710 is designed with a handle to help you move the speaker around easily.

ADVANCED USAGE

8.1 Light Effect

• Press to turn light effect on or off.
• Hold for more than 2 seconds to turn strobe light on or off.
•  Rotate the knob clockwise / counterclockwise to switch between different light patterns: Rock, Flow, Cross, Ripple, or Flash.

8.2 Sound Effect Press   to select a special sound effect such as horn, clapping, scratch.
8.3 TWS Mode
You can connect two PartyBox speakers to each other via TWS mode. Press TWS on both speakers.
To exit TWS mode:
Power off or press TWS on either speaker.
Tip:

• By default, the speaker connected to your Bluetooth device acts as the primary speaker (left channel), while the other one acts as the secondary speaker (right channel).

8.4 JBL PartyBox App Download and install the JBL PartyBox App to get more from the product.
8.5 Daisy Chain 8.6 Factory reset
To restore the factory settings, hold and   for more than 10 seconds.
8.7 IPX4
Caution:

• Always keep the port dry before connecting AC power.
•  To ensure splash resistance, always keep the protective covers closed securely.

The speaker is IPX4 splash resistant.

SPECIFICATIONS

17.2″
Net weight:| 27.8 kg / 61.3 lbs
Packaging dimensions (W x H x D):| 1048 mm x 505 mm x 467 mm / 41.26″ x 19.88″ x 18.39″
Gross weight:| 31 kg / 68.34 lbs

TROUBLESHOOTING

Caution:
– Never try to repair the product by yourself. If you have any problems while using this product, check the following points before you request service.
System
The speaker will not turn on.

• Check the AC power connection. No response from some buttons
•  The product may be in demo mode. In demo mode, all the input sources and buttons, except / / and the volume and light pattern knobs, are disabled. Hold and simultaneously for more than 5 seconds to exit.

Sound
No sound from the speaker.

• Ensure that the speaker is powered on.
• Adjust volume.
• Ensure that a sound source is active and not muted.

Bluetooth
A device cannot connect with the speaker.

• Ensure that the Bluetooth function of the device is enabled.
•  The speaker is already connected with another Bluetooth device. Hold   on the speaker for more than 20 seconds to disconnect and pair with a new device.

Poor audio quality from a connected Bluetooth device

• The Bluetooth reception is poor. Move the device closer to the speaker, or remove any obstacle between the device and speaker.

COMPLIANCE

The product is in compliance with the European Union energy legislation.
Bluetooth connection mode
The product is intended to be used for streaming music via Bluetooth connection. A consumer can stream Bluetooth audio to the speaker. When the product is connected through
Bluetooth, the Bluetooth connection must remain active at all times to ensure proper operation.
The product will enter sleep mode (networked standby) after 20 minutes without operation. The power consumption in sleep mode is less than 2.0 Watts, after which it can be re-activated via Bluetooth connection.
Bluetooth disconnection mode
The product will enter standby mode after 20 minutes without operation. The power consumption in standby mode is less than 0.5 Watts.
TRADEMARK
The Bluetooth®1 word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective  owners.
Made for iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone  12 mini, iPhone SE (2nd generation), iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, and iPhone 6s.
Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Apple, and iPhone are trademarks of Apple Inc., registered in the
U.S. and other countries.
The trademark “iPhone” is used in Japan with a license from Aiphone K.K.
Party speaker with 800W RMS powerful sound, built-in lights and splashproof design The life of every party.
The splashproof PartyBox 710 transforms your next event into a real party, concert or nightclub. With its unique and colorful light show synced to JBL Original Pro Sound. Minimalistic and  intuitive top panel controls and the PartyBox App let you create next-level musical and visual experiences. Customizing both the flashing, strobe lights and the amazing sound from the dual set of tweeters and bass-rich woofers. One-button True Wireless Sound instantly pairs two PartyBox 710s for an even bigger crowd. And with an easy- to-grip handle and robust wheels, you can keep the good times rolling wherever the party goes.
Features

• 800W RMS of powerful JBL Original Pro Sound
• Dynamic, colorful, customizable lightshow
• IPX4 splashproof
• Pair your speakers for even bigger sound
• Easy-to-grip handle and robust wheels
• Guitar and mic inputs
• PartyBox app

Features and Benefits
800W RMS of powerful JBL Original Pro Sound
Create an instant musical connection with 800 powerful watts of high- performance JBL Original Pro Sound. Dual 2.75″ tweeters and 8″ woofers paired with its tuned bass reflex port deliver detailed audio perfection for music so loud you can literally feel the beat.
Dynamic, colorful, customizable lightshow
Lights, color, party! Transform any space into a rock concert, nightclub, and karaoke lounge all rolled into one. Sync your music to dynamic, customizable strobes, a unique starry night effect, and next level flashing club patterns easily controlled via the streamlined, user-friendly top panel dials or PartyBox app.
IPX4 splashproof
Whether you are partying with friends in your backyard or sipping drinks by the pool, the JBL PartyBox 710 is IPX4 splashproof so you never have to worry about the party getting too wet and wild.
Pair your speakers for even bigger sound
One JBL PartyBox not enough? Pair two speakers via cable or wireless by True Wireless Stereo (TWS) technology for even bigger, bolder sound.
Easy-to-grip handle and robust wheels
Get the party rolling with big, robust, smooth-running wheels and an easy-grip handle for convenient portability and placement of the JBL PartyBox 710 wherever the music takes you.
Guitar and mic inputs
With guitar and dual mic inputs, you can show your talents as you sing and play along. With the karaoke EQ tuning, not only will you sound great but you’ll look great, too, with the perfect light show for rocking out!
PartyBox app
The JBL PartyBox app makes it easier than ever to control your music, update settings, and customize the colors and patterns of your light show for the perfect party vibe.
What’s in the box

• 1 x JBL Party Speaker 710
• 1 x Quick-Start Guide
• 1 x Warranty Card
• 1 x Safety Sheet
• 1 x right angle AC Power cord
  (AC Plug varies by Region)

Technical Specifications

• General specification
• Model No.: PartyBox 710
• Transducers: 2 x 216mm (8″) woofer, 2 x 70mm (2.75″) tweeter
• Output power: 800W RMS (IEC60268)
• Power input: 100 – 240 VAC ~50/60Hz
• Frequency response: 35Hz – 20kHz (-6dB)
• Signal-to-noise ratio: >80dB
• Cable type: Right-angle AC power cable (type varies by regions)
• Cable length: 2.0m/6.6ft

USB specification

• USB charge out: 5V/2.1A (max)
• USB format: FAT16, FAT32

Wireless specification

• Bluetooth® version: 5.1
• Bluetooth® profile: A2DP V1.3, AVRCP V1.6
• Bluetooth® transmitter frequency range: 2400MHz – 2483.5MHz
• Bluetooth® transmitter power: ≤ 11dBm (EIRP)
• Bluetooth®  transmitter modulation: GFSK, π/4 DQPSK, 8DPSK

Audio specification

• Supported formats: .mp3, .wma, .wav

Input Sensitivity

• Aux-In: 250 mVrms (3.5mm connector)
• Mic-In: 20 mVrms
• Guitar-In: 100 mVrms
• Bluetooth/USB Input: -12 dBFS

Product Dimensions

• Dimensions (W x H x D):
• 399.0mm x 905.0mm x 436.0mm /
• 15.70″ x 35.60″ x 17.20″
• Net Weight: 27.80kg/61.30 lbs

Packaging Dimensions

• Dimensions (W x H x D): 1048.0mm x 505.0mm x 467.0mm/ 41.26″ x 19.88″ x 18.39″
• Gross Weight: 31.00kg/68.34 lbs

HARMAN International Industries, Incorporated 8500 Balboa Boulevard, Northridge, CA 91329 USA www.jbl.com
© 2021 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. The Bluetooth ®word mark and logos are registered trademarks owned by Bluetooth ®  SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners. Features, specifications and appearance are subject to change without notice.
Safety Instruction and Warranty Card
PRODUCT REGISTRATION
registerjbl.com
Register your product
Oroduct registration may not be available for all conutries

https://register.jbl.com/?utm_source=WQR

Download the full warranty Card and safety Information and other helpful information from our website: www.jbl.com/warrantyandsafetybooks

https://www.jbl.com/warrantyandsafetybooks

IMPORTANT SAFETY INSTRUCTIONS

For all products:

1. Read these instructions.
2. Kenp these instructions.
3.  Heed all wanings.
4.  Follow all instructions.
5.  Glean only with 2 dry doth.
6.  Donot block any ventilation openings. install this apparatus inxaccordance with the manufacturer’s instructions.
7.  Denot install this spparatus neas ary beat sources such as radiators, heat registers, stoves or other apparatus (iInduding amplifiers) that preduce heat,
8.  Donat defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two btades and a third grounding prong. The wide blade or the third prong is provided for your safety. if the provided plug does not into your outiet, consult an electridan for replacement of the obsolete outlet.
9.  Protect the power cond from being walled on or pinched, particularly at plugs, convenience receptacies and the point where they exit from the apparatus.
10.  Use onty attachments/accessories specified by the manufacturer.
11. Use oruly with she cart, stand, tripod, bracket or table specified by the rnanufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apperates combination to avoid injury froma tip-qver,
12.  Unplag this appacates daring lightning stones or when unused for long pertods of time.
13.  Refer all servicing to qualified service personnel. Servicing is required when the apparates has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
14. Te disconnect this apparatus from the AC mains completely, disconnect the power- supply cord plug from the AC receptade.
15. The mains plug cf the power-supply cord shail remain readily operable. 10. Rs apparatus 1s tetended to be used only with the power supply and/or charging cable provided by the manufacturer.

The following instructions may not apply to waterproof devices. Refer to your device user manual or quick start quide for more waterproof instruction if any.

• Donot use this apparatus near water.
•  Do not expose this apparatus to dripping or splashing, and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.

WARMING: FO REDUCE THE RISK OF FARE OR ELECTRIC SHOCK, BO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
THIS SYMBOL ON THE PRODUCT MEANS THERE IS UNINSULATED, DANGEROUS VOLTAGE WITHIN THE PRODUCT ENCLOSURE THAT MAY PRESENT A RISK OF ELECTRICAL SHOCK.
THIS SYMBOL ON THE PRODUCT MEANS THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THIS GUIDE.
CAUTION FCC AND IC STATEMENT FOR USERS (USA AND CANADA ONLY)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, induding interference that may Cause undesired operation.
CAN ICES-3{B)/NMB-3(B)
FCC SDOC SUPPLIER’S DECLARATION OF CONFORMITY HARMAN international hereby declares that this equipment is in compliance with the FCC Part 15 Subpart B.
The dedaration of conformity may be consulted in the support section of our Web site, accessible from www.jbl.com
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the fimits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These mits are designed to provide reasonable protection against harmful interference in  a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not Installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that Interference will not occur in a particular installation. this equipment does cause harmful interference to radio or elevision reception, whkh can be determined by turning the equipment off and on, the user Is encouraged to try to correct the lnterlertnce by one or more of the following measures:

• Rtonent Of rtl0<ate the recei’ling antenoa.
• Increase the separation betwetn the equipment and rteei’ffl.
• Connect the equipment into an outlet on a drcu~ diffe~t from that to which the rteeiwr Is connected.
• Consult the dulei or an exper1’nced radio/IV tedlnioan for lrelp.

caution: Changes or modifications not expressly approved by HARMAN could void the user’s authority to operate the equipment.
For Products That Transmit RF Energy:
(I) FCC AND IC INFORMATION FOR USERS
This dfvke complies with Part 1 S of the FCC rules and Industry Caoa~ lkenSHxempt RSS stanrd (1). Operation Is subject to the followmg lwl1 conditions: (1) This device may not cause harmful lnterftrenet; and (2) this device must accept ;iny Interference receiv!d, induding nterfmnce that may cause undesired operation.
(Ii) FCC/IC Radbtlon Exposurt Statement
This equipment complies with FCC and ISED radiation ellpOSure limits set forth for an uncontrolled environment
In ase this equipment has to subject to FCC/IC SAR (Specific Absorption Rate) exposure test this equipment Is designed to mettthe requlrtments for exposure to radio waves established by the FCC and ISEO. These requirements set a SAR limit of 1.6 Wll(g mraged Offl Or1′ gram of thsue . The highest SAR value reported undei this standard dunng product certificatlOll IOI use whtn property wom on the body or on the head, with no separation. To meet RF exposure guidelines and rtduce exposure to RF ‘”‘rv>’ during the operation, this equipment should be positioned at least this distance away from the body Of the head.
For radio equipment operates In 515O-5850MHz
FCC and IC cautton:
High power radars are allocated as primary UstB of the 1.25 to 5.3S GHz and S.6S to S.85 GHz bands. These radar stations can cause mterfertnce with and/Of ~mage to LE LAN (tlcenCt-Exempt local Alta Nttwork) devices. No configuration controls art provided for this wireless equ pmenl allowing any change in the frequency of operations outside the FCC g’int of autohoriution for US operatron according to Part 1S.407 of the FCC rules.
lC Caution:
User should also be advised that:
(1) The device for operation in the band 5150 – 5250 Mitz is only for indoer use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) the maximum antenna gain permitted for devices in the bands 5250 – 5350 Miz and 5470 – 5725 MHz shall comply with the  and
(li) The maximum antenna gain permitted for devices in the band 5725 – 5825 MHz shall comply with the  limits specified for point-to-point and non point- to-point operation as appropriate. Use Restriction Attention in European Union, operation is limited to indoor use within the band 5150-5350 Miz.
Correct disposal of this product (Waste Electrical & Electronic Equipment}
This symbol means the product must not be discarded as household waste, and should be delivered te an appropriate collection facility for recyding. Proper disposal and recycling helps protect natural resources, human health and the environment. For more  nformation on disposal and recydiing of this product, contact your local municipality, disposal service, or the shop where you bought this product.
This product is RoHS compliant.
This product is in compliance with Directive 2011/65/EU, and its amendments, on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
REACH
REACH (Regulation No 1907/2006) addresses the production and use of chemical substances and their potential impacts on human health and the environment. Article 33(1) of REACH Regulation requires suppliers to inform the recipients if an article contains more than 0.1 % (per weight per article) of any substance(s) on the Substances of Very High Concern (SVHQ Candidate List (REACH candidate list’). This product contains the szbstance “lead (CAS- No, 7439-92-1) in a concentration of more than 0.1% per weight.
At the time of release of this product, except for the lead substance, no other substances of REACH candidate list are contained in a concentration of more than 0.1% per weight in this product.
Note: On June 27, 2018, lead was added te the REACH candidate list. The indiusion of lead in the REACH candidate list does not mean that lead- containing materials pase an immediate risk or results in a restriction of permissibility of ts use.
For devices with headphone Jacks
WARNINGSICAUTlONS
Do NOT use the headphones at a high volume for any extended period.

• To aveld hearing damage, use your headphones at a comfortable, moderate vohame level.
• Ten the volume dewn on your device before placing the headphones on your ears, then tern the volume up gradually untll you reach 2 comfortable listening level.

For Products That indude Batteries
instructions for lisers on Removal, Recycling and Disposal of Used Batteries
Te remove the batteries from your equipment or remote contvel, reverse the procedure described in the owner’s manual for inserting batteries. For products with a built-in battery that lasts for the lifetime of the product, remoxal may not be possible for the user. in this case, recycling or recovery centers handle the dismantling of the product and the removal ef the battery. 1 for any reason, & becames necessary to replace such a battery, this procedure must be performed by authorized service centers. in the European Union and other locations, it is legal to dispese of any battery with household trash. All batteries mest be disposed ef in an envircamentaily sound manner. Contact your local waste-management officials for information regarding the ennfronmentally sound collection, recyding and disposal of used batteries.
WARHING: Danger of explosion if battery is incorrectly replaced. To reduce tisk of ftre, explosion or leakage of ftaramable liquid/gas, don’t disassemble, rash, puncture, short external contacts, expese to temperature above 60°C (140°F), sunshine or like, expese te extremely low air pressure or dispose ef in fre oF water. Replace only with specified batteries. The symbol indicating ‘separate collection’ for all batteries and accumulators shail be the crossed-out wheeled bin shown below:
WARNING · For Products Contain Coln/Button Cell Batteries
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD. This product contains a Coln/outton cell battery. If the coln/button cell battery is swallowed, & can cause severe internal burns in pest 2 hours and can lead to death. Neep new and used batteries away from cuildren. Wf the battery compartment does not dose securely, step using the product and keep it away from children. if you think batteries might have been swallowed or placed inside any part of the body, seek mediate medical attention.
For All Products with Wireless Operation:
HARMAN international hereby declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/S3/EU. The declaration of conformity may be consulted in the support section of ows Web site, accessible from www.jbi.com.
HARMAN International lndustTlts, Incorporated. All nghts rtselffll. JBL is a trademart of HARMAN Internationa l Industries, lncoq,oraied, registered In the United States and/Of other count~es. f’tatures, spedfic.1tioos and appearance subject to change without ootice. www.Jbl.com

WARRANTY CARD

SET UP INFORMATION & PRODUCT REGISTRATION
Congratulations with the purchase of your new Product. We have done our utmost to make your experience the best one possible. If you have any questions v.tien setting up your Product and would like some helpful hints, we recommeoo that you visit the relevant country specific support website for your Product: www.jbl.com. There you will also find relevant contact information. If you cannot find the information you are looking for, please contact the vendor that sold the Product to you or contact the relevant JBL customer support center by electrooic mail or phone.
We recommend that you register your Product via the relevant country specific website for your Product. Your registration will allow us to inform you about updates for certain products, possible new offers and new Products and/or applications. RegiStering is easy; just follow the instructions on the relevant country specific website IOI’ your Product.
NOTE: THIS LIMITED WARRANlY DOES NOT APPLY TO CONSUMERS IN THE EUROPEAN ECONOMIC AREA (EEA) MEMBER STATES AND THE RUSSIAN FEDERATION AS THEY ARE PROTECTED BY LOCAL CONSUMER LAW AND BENEFIT FROM LOCAL STATIJTORY WARRANTIES
LIMITED WARRANTY
WHO IS PROTECTED BY THE WARRANTY
This limited warranty (the “Limited Warranty”) protects only the original end-user (“you” or “your’), and is not transferable and Is applicable only in the country (excluding EEA member states and the Russian Federafion) in which you originally purchased your JBL Product (the “Product’). Any atiempt to transfer this warranty shall immediately make this warranty void.
LIMITED WARRANTY
HARMAN international Industries, Incorporated (“HARMAN”) is the manufacturer and through Its local subsidiary, warrants to you that the Product (including components provided in/with the Product) wil be free from defects in workmanship and materials for a period of ONE year from the date of retail purchase by you (the “Warranty Period’). During the Warranty Period, the Product (including components), will be repaired or replaced at HARMAN’s option. without charge for elther parts or labor OR at HARMAN’s sole option, the price of the Product may be refunded, sublect fo depreciation based on your purchase price for the Product pro-rated over the remaining balance of the Warranty Period. Any warranty service or replacement of parts will not extand the Warranty Pariod.
This Limited Warranty does not cover defects which are a resuit of: (1) damage caused by accident, unreasonable use Or neglect (including the tack of reasonable and necessary maintenance); (2) damage during shipment (claims must be
Presented to the carrier); (3) damage to, or deterioration of any accessory or decorative surface: (4) damage resulting from failure to follow instructions contained in your owner’s manual; (5) damage resulting from the performance of repairs by someone other than an authorized JBL service canter: (6) deterioration of component parts, the neture of which is to become wor or depleted with use, such as batteries and headphone ear pads.
Furthermore, this Limited Warranty covers only actual defects within the Product itsell and does not cover the cost of installation or removal from a fixed installation, setup or adjustments, claims based on misrepresentation by the seller, performance variations resulting from installation-related circumstances such as source quality or AC power or Product modifications, any union which the serial number has been effaced, modified or removed, or units used for other than home use. This Limited Warranty is valid only for JBL products purchased from an authorized dedier, Except to the extent expressly prohibited in your jurisdiction by applicable law, all implied warranties, including fitness for a Particular purpose and merchantability are hereby excluded and in no event shall HARMAN or any HARMAN subsidiary be Kable for any indirect, direct, incidental, special or consequential loss or damages whatsoever (including, without limitation, other pecuniary loss) arising out of the use of or inability to use the Product, even ff HARMAN and/or a HARMAN subsidiary have been advised of the possibility of such damages. To any extent that HARMAN cannot lawtully disctain implied warranties under this Limited Warranty, all such implied warranties are limited in duration to fhe duration of this warranty. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or exclusions or imitations on the duration of implied warranties or conditions, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that vary by jurisdiction.
HOW TO OBTAIN WARRANTY SERVICE
Contact the dealer who sold you this Product, or contact JBL customer support using the contact information on the relevant Country specific support website for your Product to request warranty service. To validate your right to this Limited Warranty, you must provide the original sales invoice or other proof of ownership and date of purchase. Do not retum your Product without prior authorization from the corresponding dealer or HARMAN. Warranty repair of the HARMAN Product must be carried out by an authorized dealer or service Center. Unauthorized warranty repair will void the warranty and is performed at your sole risk.
You are also welcome to consult the relevant country specific HARMAN support website for your Product for helpful hints.
WHO PAYS FOR WHAT
This Limited Warranty covers all expenses for labor and materials required for the repair OR replacement of the Product that is found to be defective, and a reasonable return shipping charge within the country of repair. Please be sure to save the original shipping carton(s), because a charge will be made for additional cartons/packaging.
You wil be changed for the cost of examining a unit thal is not in need of repair (including resulting shipping costs), or for necessary repairs not covered by this Limited Warranty.
We sincerely thank you for your expression of confidence in JBL. We wish you many years of listsning pleasure.

HARMAN International Industries, Incorporated
8500 Balboa Boulevard, Northridge, CA 91329 USA
516.255.4545 (USA only)
70-  JBL NHP SAFB2
SSA2020-002

References

• Anatel — Agência Nacional de Telecomunicações
• Welcome to the Health Canada Web site | Bienvenue au site Web de Santé Canada
• Official JBL Store - Speakers, Headphones, and More!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>