PUSR USR-S100 PV Data Stick User Guide
- June 16, 2024
- PUSR
Table of Contents
PUSR USR-S100 PV Data Stick User Guide
Introduction
USR-S100-WA01 PV data stick is a very cost-effective WiFi communication PV
networking product, supporting 802.11b /g/n protocol standard, equipped with
deeply optimized TCP/IP protocol stack,
Support TCP Client, TCP Server, UDP Client, UDP Server data transparent
transmission, HTTP protocol, simple configuration can achieve the photovoltaic
device through RS-485 stable communication with the network end.
The product adopts standard USB connector, industrial operating environment,
plug and play; The
remote platform is connected through the WIFI network, so as to achieve the
functions of data collection, configuration, remote monitoring and management
of photovoltaic equipment, improve the production efficiency and
maintainability of photovoltaic power stations, and reduce operating
Product Features
- WiFi@2.4 GHz 802.11b/g/n Wireless standard.
- Standard USB interface, plug and play, small size and easy to install.
- Industrial design, the working temperature can reach -30℃-75℃, excellent hardware protection, IP65 protection level, meet the harsh application environment.
- Data transmission is highly reliable, TCP\UDP\HTTP protocol, support no data restart and no data reconnection function, help the stable operation of the device.
- Support access to human cloud platform, private customization, quickly build their own platform.
- Support Simplelink distribution mode, simple and fast.
- A variety of configuration methods are available, and parameters can be configured through AT instructions and web pages.
- WEP, WPA/WPA2 security modes are supported.
- LAN search and wireless parameter setting functions.
Dimensions(mm)
USB Interface pin definition
Check the matching degree of the USB interface before application to prevent
misoperation from damaging the data stick.
The supported input voltage range is DC 5-24V, the power supply must ensure
the stability of the power supply (ripple less than 300mV, and ensure that the
instantaneous voltage does not exceed 48V), and ensure that the power supply
is greater than 8W.
Way to Install
The product is directly plugged into the concentrator for use
Description of indicators and buttons
Product Parameter
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation. Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the
user’s authority to operate the equipment. NOTE: This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: Reorient or relocate the receiving antenna. Increase the
separation between the equipment and receiver. Connect the equipment into an
outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. FCC
Radiation Exposure Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the
radiator & your body.